(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Holding Tools for O.D. Tuning（Selfishly：Right-hand）
| Days to Ship |
|
|---|
-
AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling)
KYOCERA
Back surface clamping type / screw clamping type small tool holder (outer diameter).
Standard Price: MYR 440.81- Days to Ship: 10 Day(s) -
SANDVIK
Sandvik Outer Diameter Holder Small Lathe Tool Shank Bit QS Holding System Short Bit QS- SVABR/L
Standard Price: MYR 1,101.08 Days to Ship: 10 Day(s) -
SABW-50F Type (Cutting Edge Width 4.7 mm, 1 Pass 5 mm Max.)
KYOCERA
Back surface clamping type / screw clamping type back turning (outer diameter) holder.
Standard Price: MYR 622.31- Days to Ship: 8 Day(s) or more -
MVLN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (M)
Standard Price: MYR 679.05- Days to Ship: 10 Day(s) -
WTKN-N Type (outer diameter, end surface, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: T (triangle); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard
Standard Price: MYR 508.31- Days to Ship: 10 Day(s) -
DVLN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)
Standard Price: MYR 443.25- Days to Ship: 10 Day(s) -
SVJB-FF Type (not offset) (outer diameter, profile machining)
KYOCERA
Back surface clamping type / screw clamping type small tool holder (outer diameter).
Standard Price: MYR 357.78- Days to Ship: 10 Day(s) -
SVJB Type (outer diameter, profile machining)
KYOCERA
Back surface clamping type / screw clamping type small tool holder (outer diameter).
Standard Price: MYR 440.70- Days to Ship: 10 Day(s) -
SVPB Type (outer diameter, end surface, profile, relief machining)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)
Standard Price: MYR 408.41- Days to Ship: 8 Day(s) or more -
Sandvik, T-Max P, Cutting Unit, Turning, PCLNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,812.66- Days to Ship: 10 Day(s) -
SEC-SC Type Tool Bit SCLC Type (Cutting Direction: Right)
SUMITOMO ELECTRIC HARDMETAL
Screw-on type. General / End Face Cutting
Standard Price: MYR 374.83- Days to Ship: 5 Day(s) or more -
WTJN-N Type (outer diameter, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: T (triangle); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard
Standard Price: MYR 508.31- Days to Ship: 10 Day(s) -
AABS-40F Type (Blade Width 2.8 mm / Depth 4 mm MAX)
KYOCERA
Back surface clamping type / screw clamping type back turning (outer diameter) holder.
Standard Price: MYR 670.94- Days to Ship: 10 Day(s) -
SCLC-FF Type (without Offset) (External Diameter / End Face Machining)
KYOCERA
[Features]
·This is SCLC-FF type
[Applications]
·For small tools, general turning holders, machining of outer diameter and flangeStandard Price: MYR 372.10- Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSBNR/L -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Standard Price: MYR 1,279.75 Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP
SANDVIK
Excellent chip control and process stability for best part quality
Accurate high-precision coolant supply controls chip control and provides stable machiningStandard Price: MYR 2,755.45- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, C-PCLNR/L-HP
SANDVIK
Excellent chip control and process stability for best part quality
Accurate high-precision coolant supply controls chip control and provides stable machiningStandard Price: MYR 3,022.46- Days to Ship: 10 Day(s) -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTTNR/L
SANDVIK
Excellent cutting chip control and process stability for one of the best part quality
Standard Price: MYR 790.28 Days to Ship: 10 Day(s) -
Outer Diameter Turning, Shank Tool Bit, T-Max P Wedge Clamp MSSNR/L
SANDVIK
Excellent chip control and process stability for best part quality
Standard Price: MYR 1,514.55 Days to Ship: 10 Day(s) -
NGK SPARK PLUG
[Features]
Front/back common tightening type
· Can be equipped with the grooving inserts, GTM32, GTMH32 or GTMX32.Standard Price: MYR 569.72- Days to Ship: 11 Day(s) or more -
Holder For Outer Diameter Machining, TTGN/WTGN
NGK SPARK PLUG
[Features]
· For TN (equilateral triangle) inserts
· Multi clampStandard Price: MYR 958.81 Days to Ship: 17 Day(s) or more -
NGK SPARK PLUG
This is a double-sided clamping holder for post-grinding processing made by NGK SPARK PLUG.
TBP type inserts are compatible.
The processing application is post-grinding.Standard Price: MYR 630.49- Days to Ship: 9 Day(s) or more -
SEC-GD Type Profiling Bit GDE Type
SUMITOMO ELECTRIC HARDMETAL
Compatible with dog bone tip. For Profiling
Standard Price: MYR 1,865.64- Days to Ship: 5 Day(s) or more -
Tool Bit for SEC-Solid Sumi Boron FCLN
SUMITOMO ELECTRIC HARDMETAL
[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)
Standard Price: MYR 812.80 Days to Ship: 5 Day(s) or more -
Tool Bit for SEC-Solid Sumi Boron FN11
SUMITOMO ELECTRIC HARDMETAL
[Specifications]·Compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on
Standard Price: MYR 812.80 Days to Ship: 5 Day(s) or more -
Tool Bit for SEC-Solid Sumi Boron FN21
SUMITOMO ELECTRIC HARDMETAL
[Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: Negative 0° (N)
Standard Price: MYR 812.80 Days to Ship: 5 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Specifications]·Machining applications: post-pull; compatible insert shape: non-ISO standard; clamp method: screw-on (S)
Standard Price: MYR 534.78- Days to Ship: 5 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 374.83- Days to Ship: 5 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 374.83- Days to Ship: 5 Day(s) or more -
SEC-Outer Diameter Bit, CSDP Type
SUMITOMO ELECTRIC HARDMETAL
[Specifications]·Machining applications: chamfering; compatible insert shape: S (square); compatible insert relief angle: positive 11° (P); clamp method: clamp-on (C)
Standard Price: MYR 712.53- Days to Ship: 5 Day(s) or more -
SEC-Outer Diameter Bit, DDHN Type
SUMITOMO ELECTRIC HARDMETAL
Double Clamp Type, for Outer Diameter and Profiling Milling
Standard Price: MYR 418.97- Days to Ship: 7 Day(s) or more -
SEC-Outer Diameter Bit, DVQN Type
SUMITOMO ELECTRIC HARDMETAL
Double Clamp Type, for General, Profiling, and Necking
Standard Price: MYR 557.56- Days to Ship: 5 Day(s) or more -
SEC-Outer Diameter Bit, ETXN Type
SUMITOMO ELECTRIC HARDMETAL
Pin Lock Type, For General/End Face Cutting
Standard Price: MYR 273.63- Days to Ship: 5 Day(s) or more -
SEC-Outer Diameter Bit, MTXN Type
SUMITOMO ELECTRIC HARDMETAL
Clamp-on + Pin Lock Type, For General/End Face Cutting
Standard Price: MYR 557.56- Days to Ship: 5 Day(s) or more -
SEC-Outer Diameter Bit, PCLN Type
SUMITOMO ELECTRIC HARDMETAL
[Specifications]·Machining applications: flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)
Standard Price: MYR 712.53 Days to Ship: 5 Day(s) or more -
SEC-Outer Diameter Bit, SVPC Type
SUMITOMO ELECTRIC HARDMETAL
Screw-on type, for necking
[Features]
・ A stable clamp improves insert fracture resistance.
・ High index precision improves machining precision.
・ Insert replacement work is possible from the bottom side of the tool bit.
・ Ideal for high efficiency, intermittent, and high hardness material machining.Standard Price: MYR 374.83- Days to Ship: 5 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
High-efficiency roughing of long components is possible. Spring shaped cutting chips are unlikely to become entangled in workpieces or machinery.
Standard Price: MYR 685.18 Days to Ship: 5 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Specifications]·Machining applications: profiling; compatible insert shape: T (triangle); clamp method: double clamp (D)
Standard Price: MYR 534.78- Days to Ship: 5 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
Wavy fitting part and clamp-on lock for high strength insert clamping
Standard Price: MYR 534.78- Days to Ship: 5 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Specifications]·Compatible insert shape: S (square); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 374.83- Days to Ship: 5 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Specifications]·Compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 374.83- Days to Ship: 5 Day(s) or more -
SEC-Mini Bit, SD Type (11° positive)
SUMITOMO ELECTRIC HARDMETAL
[Specifications]·Machining applications: profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)
Standard Price: MYR 374.83- Days to Ship: 5 Day(s) or more -
SEC-Mini Bit, SD Type (7° positive)
SUMITOMO ELECTRIC HARDMETAL
[Specifications]·Machining applications: profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 374.83- Days to Ship: 5 Day(s) or more -
SEC-Turning Tool Bit, CSKP Type
SUMITOMO ELECTRIC HARDMETAL
Clamp-on. For flanges.
[Features]
·Stable clamping improves wear resistance of inserts
·High index precision improves machining precision
·It is possible to replace the insert from the underside of the tool bit
·It is ideal for high-efficiency, intermittent, high-hardness material machiningStandard Price: MYR 812.80 Days to Ship: 5 Day(s) or more -
SEC-Turning Tool Bit, CSRP Type
SUMITOMO ELECTRIC HARDMETAL
Clamp-on. For general turning.
[Features]
·Stable clamping improves wear resistance of inserts
·High index precision improves machining precision
·It is possible to replace the insert from the underside of the tool bit
·It is ideal for high-efficiency, intermittent, high-hardness material machiningStandard Price: MYR 712.53- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Applicable Tip Shape |
| Applicable Chip Clearance Angle |
| Selfishly |
| Application |
| Clamp Shape |
| Shank height(mm) |
| Shank width(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | SANDVIK | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SUMITOMO ELECTRIC HARDMETAL | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | NGK SPARK PLUG | NGK SPARK PLUG | NGK SPARK PLUG | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL |
| Product Series | AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling) | WTKN-N Type (outer diameter, end surface, profile machining) | SVJB-FF Type (not offset) (outer diameter, profile machining) | SVPB Type (outer diameter, end surface, profile, relief machining) | SCLC-FF Type (without Offset) (External Diameter / End Face Machining) | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSBNR/L -4 | Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTTNR/L | Outer Diameter Turning, Shank Tool Bit, T-Max P Wedge Clamp MSSNR/L | ||||||||||||||||||||||||||||||||||||
| Days to Ship | 10 Day(s) | 10 Day(s) | 8 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 8 Day(s) or more | 10 Day(s) | 5 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 11 Day(s) or more | 17 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Applicable Tip Shape | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | Other | V (35° Diamond-Shaped) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | T (Triangle) | Other | C (80° Diamond-Shape) | S (Rectangular) | S (Rectangular) | C (80° Diamond-Shape) | T (Triangle) | S (Rectangular) | T (Triangle) | T (Triangle) | Other | Other | C (80° Diamond-Shape) | S (Rectangular) | T (Triangle) | Other | T (Triangle) | T (Triangle) | S (Rectangular) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | T (Triangle) | T (Triangle) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | Other | Other | Other | S (Rectangular) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | S (Rectangular) | S (Rectangular) |
| Applicable Chip Clearance Angle | Pozidriv | - | - | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Negative | Pozidriv | Negative | - | Pozidriv | - | Negative | Negative | Negative | Negative | - | - | - | Pozidriv | - | - | - | - | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Negative | Pozidriv | - | - | - | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv |
| Selfishly | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand |
| Application | Outer Diameter / Profiling | Outer Diameter / Profiling | Post-Grinding | Outer Diameter / Profiling | Outer Diameter / End Face / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / End Face / Profiling | Outer Diameter / End Face / Chamfer | Outer Diameter / End Face | Outer Diameter / Profiling | Post-Grinding | Outer Diameter / End Face | Outer Diameter | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / End Face / Chamfer | Outer Diameter | Outer Diameter / End Face / Profiling / Chamfer | Post-Grinding | Outer Diameter | Post-Grinding | Outer Diameter / End Face / Profiling | Outer Diameter / End Face | Outer Diameter | Outer Diameter / End Face | Post-Grinding | Outer Diameter | Outer Diameter | Outer Diameter / Chamfer | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / End Face | Outer Diameter / End Face | Outer Diameter / End Face | Outer Diameter / Profiling | Outer Diameter | Outer Diameter / Profiling | Outer Diameter / End Face / Profiling | Outer Diameter | Outer Diameter / End Face | Outer Diameter / Profiling | Outer Diameter / Profiling | End Face | Outer Diameter |
| Clamp Shape | Back Surface Clamp | Clamp-on | Other | Double Clamp | Wedge Lock | Cable clamp | Screw-on | Screw-on | Screw-on | Pin Lock | Screw-on | Wedge Lock | Back Surface Clamp | Screw-on | Clamp-on | Pin Lock | Pin Lock | Cable clamp | Double Clamp | - | Clamp-on / Cable clamp | - | - | Clamp-on | Clamp-on | Clamp-on | - | Screw-on | Screw-on | Clamp-on | Cable clamp | Cable clamp | Pin Lock | Double Clamp | Lever lock | Screw-on | - | Cable clamp | Cable clamp | - | - | - | - | Clamp-on | Clamp-on |
| Shank height(mm) | - | 12 | - | - | - | - | - | - | 10 ～ 25 | - | 8 ～ 25 | - | - | 8 ～ 18 | - | - | - | 20 | 40 | - | - | - | 25 | 25 | 25 | 25 | 10 ～ 20 | 10 ～ 20 | 8 ～ 20 | 19 ～ 25 | 20 ～ 25 | 20 ～ 25 | 12 ～ 25 | 20 ～ 25 | 40 | 10 ～ 25 | 12 ～ 16 | 20 ～ 25 | 20 ～ 25 | 10 ～ 20 | 8 ～ 20 | 10 ～ 16 | 8 ～ 20 | 25 | 19 ～ 25 |
| Shank width(mm) | - | 12 | - | - | - | - | - | - | 10 ～ 25 | - | 8 ～ 25 | - | - | 8 ～ 16 | 25 | - | - | 20 | 40 | - | - | - | 25 | 25 | 25 | 25 | 10 ～ 20 | 10 ～ 20 | 8 ～ 20 | 19 ～ 25 | 20 ～ 25 | 20 ～ 25 | 12 ～ 25 | 20 ～ 25 | 40 | 10 ～ 25 | 12 ～ 16 | 20 ～ 25 | 20 ～ 25 | 10 ～ 20 | 8 ～ 20 | 10 ～ 16 | 8 ～ 20 | 25 | 19 ～ 25 |
Loading...
Configure
Specification/Dimensions
-
Applicable Tip Shape
-
Applicable Chip Clearance Angle
- Negative
- Pozidriv
-
Selfishly
- Right-hand
- Left-hand
- No-hand
-
Application
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Back Surface Clamp
- Other
-
Shank height(mm)
-
Shank width(mm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Holding Tools for O.D. Tuning
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy