(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Straight Scale Rulers
| Days to Ship |
|
|---|
-
SHINWASOKUTEI
A standard ruler to measure length.
[Features]
· JIS Class 1 with an extensive range of sizes from 15 cm to 2 m.
· Stainless steel material used in its original form.
· Inch conversion table on back surface (15 cm to 1 m, no longer than 1.5 m)
[Applications]
· Ideal for measuring the length of straight lines.Standard Price: MYR 13.17- Days to Ship: 1 Day(s) or more -
Straight Edge: Angle Ruler (with Stopper)
SHINWASOKUTEI
A ruler which can measure not only length but also depth or steps.
[Features]
· JIS1 Grade.
· With red numerals.
· With a silver stopper.
[Applications]
· Ideal for measuring length, depth, or steps.
[Specifications]
· Stopper Thickness: 5mm, Width: 22mm (for 15cm)
· Stopper Thickness: 6mm, Width: 35mm (for 30cm)Standard Price: MYR 52.61- Days to Ship: 8 Day(s) -
SHINWASOKUTEI
[Features]
· JIS Grade 1 (15 cm – 1 m)
· The basic performance is unchanged, with the tip of the scale bent, to make grasping easier
· Large, easily readable numbers are adopted
[Specifications]
· Weights and measures conversion table on back surface.
· Scale: Upper/lower 1 mm pitchStandard Price: MYR 14.43- Days to Ship: 7 Day(s) or more -
TOEIKOGYO
[Features]
· Scale can be read in 0.1 mm increments and is equipped with a Vernier stopper.
· 0.1 mm scale vernier stopper added to JIS Class 1 scale.
· 0.4 mm Vernier scale reduces reading errors due to parallax.
· A steel plate spring is built into the stopper to keep the scale from wobbling.
· Used together with a narrow point scribe needle, it can be used instead of a high gauge.Standard Price: MYR 212.90- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 28.72- Days to Ship: 9 Day(s) -
SHINWASOKUTEI
Silver-coated ruler which suppresses surface reflection for easily readable scale.
[Features]
· JIS Class 1 with an extensive range of sizes (15 cm to 2 m are available).
· An etched and plated scale whose performance will not deteriorate over time, even when used under harsh conditions.
[Applications]
· Ideal for measuring length.Standard Price: MYR 15.07- Days to Ship: 1 Day(s) or more -
NIIGATA SEIKI (SK)
A ruler featuring a newly designed stepped scale which helps prevent user error when taking measurements in mm units.
[Features]
· Adopts a stepped scale with 1 mm graduations.
· The end of the scale is bent, making it easy to grasp with one hand.
· Features continuous numbering and a +2 mm point scale for quicker taking of measurements.
· Features 0.5 mm graduations, allowing it to be used for even more detailed work. (CU-15KDF only)
· The end of the scale is bent, making it easy to grasp with one hand.
· Features a silver finish. The outer peripheral surface has been finished with a light chamfer, making it even safer to handle. (JIS B7516 standards)
[Applications]
· Used for delineation, scribing and measuring dimensions.Standard Price: MYR 19.32- Days to Ship: 6 Day(s) or more -
Setting Measuring Tape (With Adhesive Tape)
MURATEC KDS
[Features]
· Flat tape with adhesive tape.
· Can be cut as desired.
· Numbers are arranged from left to right.
[Applications]
· Installation on work benches, machinery, etc.
· Standard scale marks for outdoor equipment, measuring sticks, water tanks, etc.Standard Price: MYR 71.50 Days to Ship: 9 Day(s) -
NIIGATA SEIKI (SK)
Scale ideal for accurate scribing work and for measuring width, height, and depth.
[Features]
· It can be installed on a JIS size linear scale.
· With a locking screw, it is possible to fix the stopper at any arbitrary position on the scale in order to take dimension measurements.
[Applications]
· Can be used for measurement from the end face, scribing work, and dimension measuring for metal and wood processing.Standard Price: MYR 56.24- Days to Ship: 9 Day(s) or more -
Narrow Width Carpenter's Square Angle Ruler
SHINWASOKUTEI
A ruler for measuring the dimensions of rounded shapes or for adhering to machinery etc.
[Features]
· A thin, narrow width type.
· Same quality as JIS standard products.
· Silver-coated for easily readable scale.
· Etched and plated scale maintains its performance even under harsh conditions.
[Applications]
· Ideal for measuring length.Standard Price: MYR 28.54- Days to Ship: 1 Day(s) or more -
Mini Scale, 15 cm, Upper and Lower Level 1 mm Pitch
SHINWASOKUTEI
A straight scale with a clip that can slide for use as a simple depth gauge.
[Features]
· Narrow and easily portable.
· With a clip for preventing loss/drop.
· Silver processing suppresses the surface reflection to make the scale easy to read.
[Applications]
· Ideal for measuring length.Standard Price: MYR 24.65- Days to Ship: 8 Day(s) or more -
Aluminum Cutter Ruler, Cut Master
SHINWASOKUTEI
[Features]
· The cutter surface has a thin stainless steel plate pasted on to help ensure that the blades do not catch.
· Anti-slip rubber is attached to the back surface to fix the ruler easily.
· Uses a handle with a special shape that is easy to hold down.
· Double left base point type. The base point of each side (measurement side and cutter side) is the left side. (Part number 65088: base point of the left side)
· With a foot equivalent scale convenient for carpenters.
· Large, vivid scale numerals have been adopted.
· Light, non-rusting, and durable.Standard Price: MYR 176.84- Days to Ship: 4 Day(s) or more -
SHINWASOKUTEI
[Features]
· All the scales are width 15 mm x thickness 0.5 mm.
[Material]
· Stainless steel.Standard Price: MYR 96.33- Days to Ship: 4 Day(s) or more -
AS ONE
【Product Specifications】
・Model number： 15cm (stain with red numbers JIS)
・Size (mm)： 175 x 15 x 0.5
・Scale： Upper/1mm pitch (15cm - 1m), up to 10cm 0.5mm pitch other 1mm pitch (from 1.5m), Lower/0.5mm pitch (15cm - 1m), 1mm pitch (from 1.5m)
・With inch conversion table (back) (15cm - 1m only)
・JIS standard product (first grade)Standard Price: MYR 678.10- Days to Ship: 9 Day(s) or more -
Aluminum Cutting Ruler Cut Master PROTECT
SHINWASOKUTEI
[Features]
· As the protective wall can be folded, it does not intrude when carrying or storing.
· The protective wall with a height of 30 mm (35 mm from the cutting surface) protects hands.
· With a protective cap, it does not damage materials.Standard Price: MYR 235.59- Days to Ship: 9 Day(s) -
Nobisuke 3x Magnification 2-Direction Measuring Type Metric Scale
SHINWASOKUTEI
[Features]
· Expands to 3 times the length and can be read close by, enabling long distances to be measured easily with just one person.
· The stopper is plastic and will not damage the contacting areas.
· Large, easily readable scale numbers are adopted.
· 2-Direction Type
· As it is telescopic in both directions, it is held in the center. Thus it is particularly suitable for measuring inside dimensions by holding the center and extending the rod left and right.Standard Price: MYR 297.75- Days to Ship: 8 Day(s) or more -
Telescopic Ruler, Measure 1 Direction, Type II
SHINWASOKUTEI
Telescopic-type straight ruler.
[Features]
· One-touch stopper lever for easy locking.
· Includes tape on the back for marking and taking notes.
· Includes a hook on the outside for performing external dimension measurement.
· Large caps on both ends and graduations close to the edges make it convenient for measuring and scribing.
[Applications]
· For measuring dimensions for interior finishing and installing fittings.Standard Price: MYR 314.76- Days to Ship: 8 Day(s) -
SHINWASOKUTEI
A stopper to be attached to a straight ruler.
[Features]
· By attaching this product to a straight ruler, you can measure not only length but also depth or steps.
[Applications]
· Ideal for scribing work and measuring length, depth and level difference.Standard Price: MYR 31.34- Days to Ship: 1 Day(s) or more -
TJM DESIGN
[Features]
- Made of lightweight and durable high-precision aluminum.
・Comes with a 25mm height guard to protect your fingers from the blade running over.
・Two rows of anti-slip rubber are embedded in the bottom.
・Equipped with an end cap that protects accuracy from impact.
[Application]
・Cutter cutting guide.Standard Price: MYR 215.79- Days to Ship: 9 Day(s) -
Straight Edge: Angle Ruler (Sliver)
TRUSCO NAKAYAMA
[Features]
· Scale is easy to see as it is blast finished which limits light reflection.
· Etched scale so it is unlikely to fade.
· Imperial conversion table and screw pilot hole diameter table included.
· JIS Class 1 rated product. (TSU15N to TSU200N)
[Applications]
· For delineation, scribing procedures, and dimension measurement.Standard Price: MYR 16.53- Days to Ship: 1 Day(s) or more -
Stopper for Direct Edge,TSD-□N
TRUSCO NAKAYAMA
[Features]
· Mounting on a carpenter's square makes it effective for scribing work and measurements of width, height, and depth.
· It can be mounted on a JIS size ruler.
[Applications]
· For scribing and measuring dimensions of metal and wood.Standard Price: MYR 50.95- Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· Since the tip is bent, it is easy to pinch objects.
· Imperial conversion table included.
· JIS Class 1 rated product.
[Applications]
· For delineation, scribing procedures, and dimension measurement.Standard Price: MYR 17.30- Days to Ship: 2 Day(s) or more -
TOEIKOGYO
Calipers can be read in 0.1 mm increments and are equipped with a Vernier stopper.
[Features]
· T-shaped hook and 0.1 mm scale vernier stopper added to JIS Class scale.
· A copper plate spring is built into the stopper to keep the scale from wobbling.
· 0.4 mm Vernier scale plate reduces reading errors due to parallax.
· Little measurement error as the product adheres to the measured object to take measurements.Standard Price: MYR 2,489.00 Days to Ship: 8 Day(s) or more -
Aluminum Cutter Ruler, Cut Master EX
SHINWASOKUTEI
The cutter surface has a thin stainless steel plate pasted on both sides to help ensure that the blades do not catch.
Standard Price: MYR 216.03- Days to Ship: 8 Day(s) or more -
Aluminum Cutter Ruler, Cut Master EX with Handle
SHINWASOKUTEI
[Features]
· The cutter surface has a thin stainless steel plate pasted on both sides to help ensure that the blades do not catch.
· An incision-free, non-slip rubber has been adopted.
· Made of elastomer resin. Adopts an easy-grip, easy-hold handle.
· Each scale on the upper and lower levels has a left base point W starting from the edge.
· With a foot equivalent scale convenient for carpenters.
· Light, non-rusting, and durable.
· Large, vivid scale numerals have been adopted.Standard Price: MYR 328.88- Days to Ship: 9 Day(s) -
Aluminum Cutter Ruler, with Cutting Rail
SHINWASOKUTEI
A ruler which can be used for measuring length, drawing a straight line, or cutting.
[Features]
· Aluminum cutter ruler with emphasis on safety.
[Applications]
· For length measurement, line drawing, cutting and use as a circular saw guide ruler.Standard Price: MYR 454.10- Days to Ship: 9 Day(s) or more -
Aluminum Cutter Ruler, Cut Master with Handle
SHINWASOKUTEI
A ruler that can be used for cutting, measuring lengths, demarcation, or as a guide ruler for circular saws.
[Features]
· Lightweight and sturdy, with no rust.Standard Price: MYR 239.76- Days to Ship: 9 Day(s) -
Nobisuke 3x Magnification 2-Direction Measuring Type Combination Scale
SHINWASOKUTEI
[Features]
· Expands to 3 times the length and can be read close by.
· Long distances can be easily measured even with just one person.
· The stopper is plastic and will not damage the contacting areas.
· Large, easily readable scale numbers are adopted.
· As it is telescopic in both directions, it is held in the center. Thus it is particularly suitable for measuring inside dimensions by holding the center and extending the rod left and right.
· For interior work, interior construction, fitting installation, front construction, step mounting, block piling, waterworks, stonework, etc.
· A, AB types: For inner dimension measurement of areas with closet storage space, floor cupboards, and crown molding.
· B/C/D/E types: For foot measures and span rods (shaku and ken measurements).Standard Price: MYR 396.26- Days to Ship: 7 Day(s) or more -
Angle Ruler, 1 mm Vertical Pitch
SHINWASOKUTEI
[Features]
· JIS1 Grade.
· Inch conversion table on back surface.
· Scale: Upper/lower 1 mm pitch.
· A 1 mm pitch, easy to read when fine scales are not necessary.Standard Price: MYR 33.19- Days to Ship: 1 Day(s) or more -
NIIGATA SEIKI (SK)
A linear scale that can be used for measuring depth with the grip slide and used as a depth gauge for measuring steps.
[Features]
· A stepped scale with easy-to-see 1 mm graduations has been adopted.
· Continuous numbering + 2 mm point scale specifications, so numerical values can immediately be grasped.
· With a clip, it is convenient for carrying around.
· Silver finish.
· Slightly chamfered on the circumference surface so that the product can be safely handled with bare hands.
[Applications]
· Used for delineation, scribing work, and dimension measurement, etc.Standard Price: MYR 33.76 Days to Ship: 9 Day(s) -
Triangular Scale for Architects with Graduation
NIIGATA SEIKI (SK)
A total number type straight ruler with a new design featuring a stepped scale that includes reduction scales frequently used in architectural examinations.
[Features]
· A triangular scale that includes reduction scales frequently used in architectural examinations.
· A stepped scale with easy-to-see 1 mm graduations has been adopted.
· All-number type for rapid reading of values.
· High-precision laser printed graduations.
· Reduction scale: 1/20, 1/50, 1/100, 1/200, 1/250, 1/300.
[Applications]
· Can be used to measure the actual size of the scale to drawn shapes and figures, and for drafting, reading scaled drawings, etc.Standard Price: MYR 41.47- Days to Ship: 8 Day(s) -
SHINWASOKUTEI
As the cutter surface has a thin stainless steel plate attached for durability, the cutter teeth do not bite in, allowing for a smooth cutting operation.
Standard Price: MYR 57.70- Days to Ship: 8 Day(s) -
SHINWASOKUTEI
A ruler used for measuring length or as a cutting or grooving ruler.
[Features]
· Lightweight and sturdy ruler which does not rust.
· It uses large, vivid scale numerals.
· The anti-slip type has a sponge on the back, allowing the ruler to be held down with light force.
[Applications]
· For measuring length, grooving, or cutting.Standard Price: MYR 30.08- Days to Ship: 8 Day(s) or more -
Drafting Tool Triangular Scale
SHINWASOKUTEI
A triangular scale used for creating drawings and reading dimensions.
[Features]
· Convenient for preparing and reading drawings that are required for registration procedures, such as land survey drawings and building floor plans. (A-15, A-30)
· Triangle scale provided with essential scales for architectural design. (B-15, B-30)
· A reduced copy of a drawing can be read at the original size. (C-15, C-30)
[Applications]
· For creating and reading drawings.Standard Price: MYR 42.80- Days to Ship: 8 Day(s) or more -
Fiber Folding Scale, Measuring Range 1000 mm-2000 mm
SHINWASOKUTEI
[Features]
· Structure is filled with glass fiber, so it is light, doesn't rust, and doesn't conduct electricity.
· Large easy to read numbers.
· It has excellent workability since it clicks into place at 90°/180°.
· It is resistant to water and the scale is also durable.
· A foldable type convenient for carryingStandard Price: MYR 55.32- Days to Ship: 8 Day(s) or more -
Straight Edge with Product Warranty (Product Body and JCSS Calibration Certificate)
SHINWASOKUTEI
Silver processing suppresses the surface reflection to make the scale easy to read. An etched and plated scale whose performance will not deteriorate over time, even when used under harsh conditions. Uses Japanese high grade materials.
Standard Price: MYR 586.10- Days to Ship: 29 Day(s) or more -
Scale with Hook, Free-Stage Scale
NIIGATA SEIKI (SK)
Hybrid scale with a hook for convenient use.
[Features]
· Hook incorporated type for measuring by snagging the workpiece.
· A stepped scale with easy-to-see 1 mm graduations has been adopted.
· Continuous numbering + 2 mm point scale specifications, so numerical values can immediately be grasped.
· Slightly chamfered on the circumference surface so that the product can be safely handled with bare hands.
[Applications]
· Used for measurement of the dimensions from the end face and simplified measurement of the C chamfer plane.Standard Price: MYR 48.04 Days to Ship: 11 Day(s) -
Aluminum Scale, Fast Level Graduations
NIIGATA SEIKI (SK)
An aluminum scale that adopts an easy-to-see linear scale and step scale with 1 mm increments.
[Features]
· Two-color printing in blue and red for clearly distinguishable scale marks and lines even in work requiring inking lines.
· Center reference point scale markings with the center set to 0, for simple assignment of dimensions to the left and right. (AS-30/AS-60/AS-100)
· Non-slip adhesive sheet (excluding AS-15), with grooving groove.
[Applications]
· For delineation, cutting work, dimension measurement, etc.Standard Price: MYR 31.16- Days to Ship: 8 Day(s) or more -
Aluminum Cut Scale, Fast Level Graduations
NIIGATA SEIKI (SK)
Measuring Scale
[Features]
With rear side anti-slip sheet and rear stainless steel plate.
A precision scale which makes the scale of 1mm increments is easy to see.
Measuring Range(mm): 600
[Application]
For cutting/scribing/dimension measurement.
[Materials]
AluminumStandard Price: MYR 259.56- Days to Ship: 8 Day(s) -
Aluminum Cut Scale, with Handle, Fast Level Graduations
NIIGATA SEIKI (SK)
Straight ruler with handle for stabilizing the work.
[Features]
· Stepped scale type with easy-to-see 1 mm graduations.
· The handle part is equipped with a device for safe cutter blade snapping.
· Center reference point scale markings with the center set to 0, for simple assignment of dimensions to the left and right.
· With handle for stabilizing the work.
· Two-color printing in blue and red for clearly distinguishable scale marks and lines even in work requiring inking lines.
· With slip-proof sheet for reverse side and stainless steel plate for back surface.
[Applications]
· Cutting work, line drawing, scribing, dimension measurement, etc.Standard Price: MYR 346.38- Days to Ship: 14 Day(s) -
Aluminum Triangular Scale, Fast Level Graduations, General Use
NIIGATA SEIKI (SK)
An easy-to-use triangular scale linear ruler, end reference point type for measurement from the scale end.
[Features]
· End reference point type for measurement from the scale end.
· Stepped scale type with easy-to-see 1 mm graduations.
· All-number type for rapid reading of values.
· High-precision laser printed graduations.
[Applications]
· For drafting, reading scaled drawings, etc.Standard Price: MYR 140.23 Days to Ship: 14 Day(s) -
Triangular Scale, for Architects NANO
NIIGATA SEIKI (SK)
High-precision laser printed graduations, with easy-to-read triangle scale.
[Features]
· A slim type that is easy to grasp and conveniently portable.
· Includes reduction scales frequently used in architectural examinations.
· Slimmer than a standard product for easy storage and carrying.
· High-precision laser printed graduations.
· Enables rapid reading of values.
[Applications]
· For drafting, reading scaled drawings, etc.Standard Price: MYR 70.02 Days to Ship: 14 Day(s) -
Smart Triangular Scale for Architects
NIIGATA SEIKI (SK)
High-precision ruler convenient for storage and carrying.
[Features]
· A slim type that is easy to grasp and conveniently portable.
· Includes reduction scales frequently used in architectural examinations.
· Slimmer than a standard product for easy storage and carrying.
· High-precision laser printed graduations.
· Enables rapid reading of values.
[Applications]
· For drafting, reading scaled drawings, etc.Standard Price: MYR 202.55 Days to Ship: 14 Day(s) -
Stainless Steel Straight Ruler EA720YC-100A
ESCO
【Product Specifications】
・Stainless steel
・Millimeter display
・Scale x Width x Thickness…1,000 x 30 x 1.0mmStandard Price: MYR 417.43 Days to Ship: 9 Day(s) or more -
![[Stainless Steel] Knife Type Straight Edge EA720YH-75](//pre-my.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007371511.jpg?$product_view_b$)
[Stainless Steel] Knife Type Straight Edge EA720YH-75
ESCO
【Product Specifications】
・Material-Stainless steel
・With insulated handle
・With wooden case
・Overall length…200mm
・Straightness…2.3μmStandard Price: MYR 699.68 Days to Ship: 9 Day(s) or more
![[Stainless Steel] Knife Type Straight Edge EA720YH-75](http://pre-my.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007371511.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Measuring Range(mm) |
| Surface Finish |
| Scale gradation of the lower level(mm) |
| Scale gradation of the upper level(mm) |
| Material |
| Calibration |
| JIS |
| Calibration Certificate |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SHINWASOKUTEI | SHINWASOKUTEI | SHINWASOKUTEI | TOEIKOGYO | ENGINEER | SHINWASOKUTEI | NIIGATA SEIKI (SK) | MURATEC KDS | NIIGATA SEIKI (SK) | SHINWASOKUTEI | SHINWASOKUTEI | SHINWASOKUTEI | SHINWASOKUTEI | AS ONE | SHINWASOKUTEI | SHINWASOKUTEI | SHINWASOKUTEI | SHINWASOKUTEI | TJM DESIGN | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TOEIKOGYO | SHINWASOKUTEI | SHINWASOKUTEI | SHINWASOKUTEI | SHINWASOKUTEI | SHINWASOKUTEI | SHINWASOKUTEI | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | SHINWASOKUTEI | SHINWASOKUTEI | SHINWASOKUTEI | SHINWASOKUTEI | SHINWASOKUTEI | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | ESCO | ESCO |
| Product Series | Nobisuke 3x Magnification 2-Direction Measuring Type Metric Scale | Nobisuke 3x Magnification 2-Direction Measuring Type Combination Scale | Straight Edge with Product Warranty (Product Body and JCSS Calibration Certificate) | Aluminum Triangular Scale, Fast Level Graduations, General Use | |||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 1 Day(s) or more | 8 Day(s) | 7 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 1 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 1 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) | 1 Day(s) or more | 9 Day(s) | 1 Day(s) or more | 9 Day(s) | 2 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 9 Day(s) | 7 Day(s) or more | 1 Day(s) or more | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 29 Day(s) or more | 11 Day(s) | 8 Day(s) or more | 8 Day(s) | 14 Day(s) | 14 Day(s) | 14 Day(s) | 14 Day(s) | 9 Day(s) or more | 9 Day(s) or more |
| Measuring Range(mm) | 150 ～ 4000 | 150 ～ 300 | 100 ～ 1000 | 0.1~300 ～ 0.1～6000 | 0 to 150 ～ 0 to 300 | 150 ～ 3000 | 150 ～ 600 | - | 150 ～ 1000 | 300 ～ 2000 | 150 | 600 ～ 2500 | 50 ～ 500 | 0-2000 ～ 0-1500 | 1,000 ～ 700 | 364-970 ～ 1424-4091 | 461-970 ～ 1704-4699 | - | - | 150 ～ 3000 | - | 150 ～ 300 | 0.1～1500 | 600 ～ 2000 | 600 ～ 2000 | 1000 ～ 2000 | 600 ～ 2000 | 1909 ～ 3636 | 150 ～ 1000 | 150 | - | - | 300 ～ 1000 | - | 1000 ～ 2000 | 150 ～ 1500 | 150 | 150 ～ 1000 | 600 ～ 2000 | 600 ～ 2000 | 160 | - | - | - | - |
| Surface Finish | Stainless Steel | Silver | Silver | Silver | - | Silver | Silver | - | - | Silver | Silver / Stainless Steel | - | - | - | - | - | - | - | - | Silver | - | Stainless Steel | Silver | - | - | - | - | - | Silver | Silver | - | - | - | - | - | Silver | Silver | - | - | - | - | - | - | - | - |
| Scale gradation of the lower level(mm) | 0.5 ～ 1 | 0.5 | 1 | - | - | 0.5 ～ 1 | 0.5 ～ 1 | - | - | 0.5 ～ 1 | 1 | - | - | 1 | - | - | - | - | - | 0.5 ～ 1 | - | 1 | - | - | - | - | - | - | 1 | 1 | - | - | - | - | - | 0.5 ～ 1 | - | - | - | - | - | - | - | - | - |
| Scale gradation of the upper level(mm) | 1 / 0.5 up to 100 mm, Other: 1 | 1 | 1 | - | - | 1 / 0.5 up to 100 mm, Other: 1 | 1 / 0.5 | 1 | - | 1 | 1 | - | - | 0.5 | - | - | - | - | - | 1 / 0.5 up to 100 mm, Other: 1 | - | 1 | - | - | - | - | - | - | 1 | 1 | - | - | 1 | - | - | 1 / 0.5 up to 100 mm, Other: 1 | - | - | - | - | - | - | - | - | - |
| Material | Stainless Steel | Stainless Steel | Stainless Steel | - | - | Stainless Steel | Stainless Steel | Stainless Steel | Aluminum / Brass | Stainless Steel | Stainless Steel | Aluminum | Stainless Steel | - | Aluminum | - | - | Brass | Aluminum | Stainless Steel | Brass | Stainless Steel | - | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Stainless Steel | Stainless Steel | Resin | Resin | Aluminum | Resin | Resin | Stainless Steel | Stainless Steel | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | - | - |
| Calibration | Corresponds To | Corresponds To | Corresponds To | - | Non-Compatible | Corresponds To | Corresponds To | - | Corresponds To | Corresponds To | Non-Compatible | - | - | - | - | - | - | Non-Compatible | - | Corresponds To | Non-Compatible | Corresponds To | - | - | - | - | - | - | - | - | - | - | - | - | - | Corresponds To | - | - | - | - | - | - | - | - | - |
| JIS | JIS1 Grade | JIS1 Grade | JIS1 Grade | JIS1 Grade | - | JIS1 Grade | JIS1 Grade / JIS B7516 | - | - | - | - | - | - | JIS1 Grade | - | - | - | - | - | JIS1 Grade | JIS1 Grade | JIS1 Grade | JIS1 Grade | - | - | - | - | - | JIS1 Grade | - | - | - | - | - | - | JIS1 Grade | - | - | - | - | - | - | - | - | - |
| Calibration Certificate | - | - | - | - | - | - | - | - | - | - | - | - | - | No | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![[Stainless Steel] Knife Type Straight Edge EA720YH-75](http://pre-my.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007371511.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Measuring Range(mm)
- 0-2000
- 0-1500
- 0 to 150
- 0 to 300
- 0.1~300
- 0.1 to 600
- 0.1～1000
- 0.1～1500
- 0.1～2000
- 0.1～3000
- 0.1～4000
- 0.1～5000
- 0.1～6000
- 1,000
- 50
- 100
- 150
- 160
- 200
- 300
- 364-970
- 450
- 461-970
- 500
- 600
- 697-1909
- 700
- 810-2017
- 1000
- 1000-2818
- 1078-2821
- 1250
- 1273-3637
- 1350
- 1351-3640
- 1424-4091
- 1500
- 1502-4093
- 1704-4699
- 1909
- 1950
- 2000
- 2500
- 3000
- 3636
- 4000
-
Surface Finish
-
Scale gradation of the lower level(mm)
-
Scale gradation of the upper level(mm)
-
Material
-
Calibration
-
JIS
-
Calibration Certificate
- Yes
- No
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Straight Scale Rulers
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy