(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Brushes with Shafts（Product Type：Cup Type Brush）
| Days to Ship |
|
|---|
-
MINITOR
[Features]
· Superior mechanical property balance (tensile strength / bending characteristics / impact strength / creep characteristics).
· Optimal for cleaning.
[Applications]
· Compatible materials: ceramics, glass, tool steel, alloy steel, resin, rubber, carbide alloy, cermet, general steel, stainless steel, aluminum, copperStandard Price: MYR 267.21- Days to Ship: 9 Day(s) or more -
Chemical/Plant Fiber Brush (Nylon)
KURODA BRUSH
[Features]
· Excellent chemical resistance, abrasion resistance, elasticity and flexibility.
[Applications]
· Suited for cleaning and washing general steel, stainless steel, copper, brass, aluminum, ceramics, glass, etc.Standard Price: MYR 23.69- Days to Ship: 33 Day(s) or more -
NAKANISHI
[Features]
· A nylon brush optimal for polishing ceramics, super steel metal, hardened metal, etc. and deburring.Standard Price: MYR 212.45 Days to Ship: 9 Day(s) -
KURODA BRUSH
[Features]
· This bristle material has the strongest firmness and abundant elasticity and is hard to break.
[Applications]
· Multipurpose uses from ultrafine deburring to cleaning to polishing.Standard Price: MYR 23.69- Days to Ship: 33 Day(s) or more -
Cup Brush With Shaft, Shaft Diameter 6 mm, Shaft Length 35 mm, Bristle Length 25 mm
TRUSCO NAKAYAMA
[Features]
· Since it is a cup type, it is suitable for work in relatively wide surfaces.
[Applications]
· For polishing, removing rust from and deburring metal surfaces, and for peeling off coatings.
· Tools used: drill / desktop drilling machine. (Use below maximum operating revolutions)Standard Price: MYR 38.41- Days to Ship: 5 Day(s) or more -
High Speed Stainless Steel Brush
MINITOR
[Features]
· Can be used at a high speed twice or more that of the standard brush of the same shape. (High speed stainless steel brush)
· An SUS316 wire brush with almost zero magnetism. Boasts excellent rust, heat, and abrasion resistance. (Non-magnetic stainless steel brush)
[Applications]
· Applicable Materials: Tool Steel, Alloy Steel, Resin, Rubber, General Steel, Stainless Steel, Aluminum, CopperStandard Price: MYR 524.38 Days to Ship: 9 Day(s) -
![GC Nylon Brush With Abrasive Grain, Wire Diameter [0.2 to 0.5 mm]](//pre-my.misumi-ec.com/linked/material/fs/NNI1/PHOTO/223012368108.jpg?$product_view_b$)
GC Nylon Brush With Abrasive Grain, Wire Diameter [0.2 to 0.5 mm]【1-5 Pieces Per Package】
NAKANISHI
[Features]
· A nylon brush containing abrasive grains suitable for deburring, polishing coating or adhesion surfaces and rust removal.Standard Price: MYR 258.38- Days to Ship: 9 Day(s) -
Chemical/Plant Fiber Brush (Anti-Static Nylon)
KURODA BRUSH
[Features]
· Conductive fiber with carbon combined with nylon. This removes the static charge of a workpiece during work and suppresses the occurrence of static electricity.
[Applications]
· Suited for precision cleaning and adhered particle removal for electronic devices, electronic parts, heat radiation aluminum, etc.Standard Price: MYR 50.46 Days to Ship: 33 Day(s) or more -
![Chemical/Plant Fiber Brush (Heat-Resistant Fiber [Aramid])](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223013449503/223013449503_001.jpg?$product_view_b$)
Chemical/Plant Fiber Brush (Heat-Resistant Fiber [Aramid])
KURODA BRUSH
[Features]
· Superior heat resistance with a 430°C melting point and a 250°C continuous operating limit temperature.
[Applications]
· Optimal for removing scales and adhesions from high temperature portions.Standard Price: MYR 56.07 Days to Ship: 33 Day(s) or more -
Nylon Brush Containing Abrasive Grain
KURODA BRUSH
[Features]
· A flexible and elastic nylon brush, with excellent durability, containing abrasive grains (*Silicon carbide or aluminum oxide).
· Suited for deburring, rust removal and polishing metal, plastic, rubber, etc.Standard Price: MYR 44.84- Days to Ship: 33 Day(s) or more -
Metal Brush (Stainless Steel Wires)
KURODA BRUSH
[Features]
· Strong against acid, alkali and heat, with little rust occurrence or breakage, maintaining stable strength.
[Applications]
· Suited for deburring and polishing general steel, stainless steel and aluminum products.Standard Price: MYR 30.46- Days to Ship: 33 Day(s) or more -
Precision Brush (Wheel Type / Cup Type / End Type)
YANASE
Brush materials such as iron, stainless steel, brass, tampico, or Unilon are available.
Standard Price: MYR 227.47- Days to Ship: 18 Day(s) or more -
Shafted Cup Brush, Maximum Operating Rotational Speed (Rpm): 3000
TRUSCO NAKAYAMA
[Features]
· Brush has a cup shape, with the hairs planted downwards.
· Can be removed with a single touch as it is used with an electric impact screwdriver.
· For a relatively wide surface.
[Applications]
· For deburring, polishing, and cleaning metal surfaces.Standard Price: MYR 61.02- Days to Ship: 5 Day(s) or more -
Cup Type Brush (Shaft Diameter 3 mm, Outer Diameter 13 mm)
TRUSCO NAKAYAMA
[Features]
· Easily changed due to having shaft.
· A cup type brush that is compact and easy to use with high-speed rotation.
[Applications]
· Cup type hence ideal for bottom/curved corner polishing.
· Ideal for flat and side polishing.
· Tool used: variable-speed type electric micro grinder.Standard Price: MYR 33.36- Days to Ship: 5 Day(s) or more -
Hex Shaft Cup Wire Brush BCW-50/65/75
H & H
For rust removal, base processing for plating paint/peeling/paint, deburring
Standard Price: MYR 52.00- Days to Ship: 4 Day(s) or more -
Hex Shaft Cup Wire Brush BCB-50/65/75
H & H
For brass and copper polishing, moire finishing of wooden products, and polished finish of alloy products
Standard Price: MYR 64.25- Days to Ship: 7 Day(s) or more -
Steel Plated Wire Shaft Mounted Cup Brush (Yellow Strand)
SUN POWER(TAIYO SHOKAI)
Optimal for rust removal, base polishing of plating coating, removal of coatings, etc., finish of welding locations, deburring of press cutting, cast items, and polishing of metal surfaces.
Standard Price: MYR 39.66- Days to Ship: 2 Day(s) or more -
0.3 Steel Wire Cup Brush with Shaft
SUN POWER(TAIYO SHOKAI)
Optimal for rust removal, base polishing of plating coating, removal of coatings, etc., finish of welding locations, deburring of press cutting, cast items, and polishing of metal surfaces.
Standard Price: MYR 58.21- Days to Ship: 3 Day(s) or more -
SUS304 Stainless Steel Cup Brush with Shaft
SUN POWER(TAIYO SHOKAI)
Optimal for rust removal, base polishing of plating coating, removal of coatings, etc., finish of welding locations, deburring of press cutting, cast items, and polishing of metal surfaces.
Standard Price: MYR 48.92- Days to Ship: 2 Day(s) or more -
SUN POWER(TAIYO SHOKAI)
Optimal for rust removal, base polishing of plating coating, removal of coatings, etc., finish of welding locations, deburring of press cutting, cast items, and polishing of metal surfaces.
Standard Price: MYR 51.68- Days to Ship: 4 Day(s) or more -
Cup Brush with Grit Shaft, with Abrasive Grain #60
SUN POWER(TAIYO SHOKAI)
Optimal for rust removal, base polishing of plating coating, removal of coatings, etc., finish of welding locations, deburring of press cutting, cast items, and polishing of metal surfaces.
Standard Price: MYR 82.20- Days to Ship: 7 Day(s) or more -
Cup Brush with Grit Shaft, with Abrasive Grain #180
SUN POWER(TAIYO SHOKAI)
Optimal for rust removal, base polishing of plating coating, removal of coatings, etc., finish of welding locations, deburring of press cutting, cast items, and polishing of metal surfaces.
Standard Price: MYR 69.66- Days to Ship: 2 Day(s) or more -
SUN POWER(TAIYO SHOKAI)
Optimal for rust removal, base polishing of plating coating, removal of coatings, etc., finish of welding locations, deburring of press cutting, cast items, and polishing of metal surfaces.
Standard Price: MYR 65.55- Days to Ship: 4 Day(s) or more -
Cup Brush With Miniature Stainless Steel Shaft, Outer Diameter (mm): 13, Wire Diameter (mm): 0.1
SUN POWER(TAIYO SHOKAI)
Optimal for rust removal, base polishing of plating coating, removal of coatings, etc., finish of welding locations, deburring of press cutting, cast items, and polishing of metal surfaces.
Standard Price: MYR 54.93 Days to Ship: 8 Day(s) or more -
Miniature Black Bristle Shaft Mounted Cup Brush
SUN POWER(TAIYO SHOKAI)
Optimal for rust removal, base polishing of plating coating, removal of coatings, etc., finish of welding locations, deburring of press cutting, cast items, and polishing of metal surfaces.
Standard Price: MYR 44.84 Days to Ship: 8 Day(s) or more -
Cup brush with miniature brass shaft
SUN POWER(TAIYO SHOKAI)
Optimal for rust removal, base polishing of plating coating, removal of coatings, etc., finish of welding locations, deburring of press cutting, cast items, and polishing of metal surfaces.
Standard Price: MYR 79.99- Days to Ship: 9 Day(s) or more -
Cup Brush With Miniature Stainless Steel Shaft, Wire Diameter 0.15 mm, Shaft Diameter 3 mm
SUN POWER(TAIYO SHOKAI)
Optimal for rust removal, base polishing of plating coating, removal of coatings, etc., finish of welding locations, deburring of press cutting, cast items, and polishing of metal surfaces.
Standard Price: MYR 79.99- Days to Ship: 8 Day(s) or more -
Quick grit cap brush w/ abrasive particles
SUN POWER(TAIYO SHOKAI)
Can be set in 2 seconds without the need for a wrench or any other tools. The shaft does not slip, ensuring that, even with air tools at high rotation speeds, there is no run-out.
Standard Price: MYR 133.85 Days to Ship: 8 Day(s) or more -
SUN POWER(TAIYO SHOKAI)
Can be set in 2 seconds without the need for a wrench or any other tools. The shaft does not slip, ensuring that, even with air tools at high rotation speeds, there is no run-out.
Standard Price: MYR 135.11 Days to Ship: 4 Day(s) or more -
Cup Type Brush (Shaft Diameter 3 mm, Outer Diameter 13 mm) 1 Box (50 Pieces)【50 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· It is an affordable 50-piece pack.
· Easily changed due to having shaft.
· A cup type brush that is compact and easy to use with high-speed rotation.
[Applications]
· Cup type hence ideal for bottom/curved corner polishing.
· Ideal for flat and side polishing.
· Tool used: variable-speed type electric micro grinder.Standard Price: MYR 2,033.33 Days to Ship: 9 Day(s) -
MINITOR
[Features]
· With a rough fiber surface ideal for polishing work where a level of polishing agent retention higher than that provided by synthetic fibers is required.
· Optimal for cleaning.
[Applications]
· Compatible materials: ceramics, glass, tool steel, alloy steel, resin, rubber, carbide alloy, cermet, general steel, stainless steel, aluminum, copperStandard Price: MYR 183.73- Days to Ship: 9 Day(s) or more -
MINITOR
[Features]
· With a rough fiber surface ideal for polishing work where a level of polishing agent retention higher than that provided by synthetic fibers is required.
· Optimal for cleaning.
[Applications]
· Compatible materials: ceramics, glass, tool steel, alloy steel, resin, rubber, carbide alloy, cermet, general steel, stainless steel, aluminum, copperStandard Price: MYR 183.73- Days to Ship: 9 Day(s) or more -
Nylon Brush With C Abrasive Grain (Shaft Diameter 2.34 mm)
MINITOR
[Features]
· Nylon wire material with abrasive grain that provides excellent grinding and polishing performance.
· Superior mechanical property balance (tensile strength / bending characteristics / impact strength / creep characteristics).
[Applications]
· Compatible materials: tool steel, alloy steel, general steel, stainless steel, aluminum, copperStandard Price: MYR 419.07 Days to Ship: 9 Day(s) or more -
Nylon Brush With C Abrasive Grain (Shaft Diameter 3.0 mm)
MINITOR
[Features]
· Nylon wire material with abrasive grain that provides excellent grinding and polishing performance.
· Superior mechanical property balance (tensile strength / bending characteristics / impact strength / creep characteristics).
[Applications]
· Compatible materials: tool steel, alloy steel, general steel, stainless steel, aluminum, copperStandard Price: MYR 291.73- Days to Ship: 9 Day(s) or more -
Nylon Brush With C Abrasive Grain (Shaft Diameter 6.0 mm)
MINITOR
[Features]
· Nylon wire material with abrasive grain that provides excellent grinding and polishing performance.
· Superior mechanical property balance (tensile strength / bending characteristics / impact strength / creep characteristics).
[Applications]
· Compatible materials: tool steel, alloy steel, general steel, stainless steel, aluminum, copperStandard Price: MYR 132.88- Days to Ship: 9 Day(s) or more -
Nylon Brush With Diamond Abrasive Grain, Maximum Rotational Speed (Rpm): 15000
MINITOR
[Features]
· Nylon wire material with abrasive grain that provides excellent grinding and polishing performance.
· Superior mechanical property balance (tensile strength / bending characteristics / impact strength / creep characteristics).
[Applications]
· Compatible materials: ceramics, glass, tool steel, alloy steel, cemented carbide, cermetStandard Price: MYR 259.60 Days to Ship: 9 Day(s) or more -
MINITOR
[Features]
· This is a metal wire rod with excellent heat resistance, wear resistance, and durability.
[Applications]
· Applicable Materials: Tool Steel, Alloy Steel, General Steel, Stainless Steel, Aluminum, CopperStandard Price: MYR 262.23- Days to Ship: 9 Day(s) or more -
NAKANISHI
[Features]
· A natural bristle brush with excellent flexibility and elasticity.Standard Price: MYR 168.29- Days to Ship: 8 Day(s) or more -
Stainless Steel Cup Brush With Shaft【1-5 Pieces Per Package】
YANASE
[Features]
· Excellent resistance to acids, alkalis, and heat, so that rust is not produced on the workpiece after polishing.Standard Price: MYR 150.58- Days to Ship: 45 Day(s) or more -
Standard Price: MYR 150.58- Days to Ship: 10 Day(s) or more -
Standard Price: MYR 101.99 Days to Ship: 11 Day(s) -
YANASE
[Features]
· A cup brush with shaft using Unilon nonwoven fabric with special abrasive treatment and nylon fiber.Standard Price: MYR 87.31- Days to Ship: 34 Day(s) or more -
Precision Brush / Stainless Steel, Cup Type【1-10 Pieces Per Package】
YANASE
[Features]
· A precision brush that achieves a high quality finish.Standard Price: MYR 111.40- Days to Ship: 10 Day(s) or more -
YANASE
[Features]
· It has excellent resistance to acids and alkalis.
· Features outstanding heat resistance.Standard Price: MYR 101.14- Days to Ship: 13 Day(s) or more -
YANASE
[Features]
· As well as excellent wear resistance, the bristles have suitable resilience and bend recovery properties.
· Endures long periods of continuous use.Standard Price: MYR 193.08- Days to Ship: 47 Day(s) or more
![GC Nylon Brush With Abrasive Grain, Wire Diameter [0.2 to 0.5 mm]](http://pre-my.misumi-ec.com/linked/material/fs/NNI1/PHOTO/223012368108.jpg?$product_view_b$)
![Chemical/Plant Fiber Brush (Heat-Resistant Fiber [Aramid])](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223013449503/223013449503_001.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Shaft Diameter(mm) |
| Product Type |
| Outer Diameter(mm) |
| Wire diameter(mm) |
| Brush Long(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MINITOR | KURODA BRUSH | NAKANISHI | KURODA BRUSH | TRUSCO NAKAYAMA | MINITOR | NAKANISHI | KURODA BRUSH | KURODA BRUSH | KURODA BRUSH | KURODA BRUSH | YANASE | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | H & H | H & H | SUN POWER(TAIYO SHOKAI) | SUN POWER(TAIYO SHOKAI) | SUN POWER(TAIYO SHOKAI) | SUN POWER(TAIYO SHOKAI) | SUN POWER(TAIYO SHOKAI) | SUN POWER(TAIYO SHOKAI) | SUN POWER(TAIYO SHOKAI) | SUN POWER(TAIYO SHOKAI) | SUN POWER(TAIYO SHOKAI) | SUN POWER(TAIYO SHOKAI) | SUN POWER(TAIYO SHOKAI) | SUN POWER(TAIYO SHOKAI) | SUN POWER(TAIYO SHOKAI) | TRUSCO NAKAYAMA | MINITOR | MINITOR | MINITOR | MINITOR | MINITOR | MINITOR | MINITOR | NAKANISHI | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE |
| Product Series | Cup Brush With Shaft, Shaft Diameter 6 mm, Shaft Length 35 mm, Bristle Length 25 mm | GC Nylon Brush With Abrasive Grain, Wire Diameter [0.2 to 0.5 mm]【1-5 Pieces Per Package】 | Shafted Cup Brush, Maximum Operating Rotational Speed (Rpm): 3000 | Cup Brush With Miniature Stainless Steel Shaft, Outer Diameter (mm): 13, Wire Diameter (mm): 0.1 | Cup Brush With Miniature Stainless Steel Shaft, Wire Diameter 0.15 mm, Shaft Diameter 3 mm | Cup Type Brush (Shaft Diameter 3 mm, Outer Diameter 13 mm) 1 Box (50 Pieces)【50 Pieces Per Package】 | Nylon Brush With Diamond Abrasive Grain, Maximum Rotational Speed (Rpm): 15000 | Stainless Steel Cup Brush With Shaft【1-5 Pieces Per Package】 | Precision Brush / Stainless Steel, Cup Type【1-10 Pieces Per Package】 | ||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) or more | 33 Day(s) or more | 9 Day(s) | 33 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 9 Day(s) | 33 Day(s) or more | 33 Day(s) or more | 33 Day(s) or more | 33 Day(s) or more | 18 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 2 Day(s) or more | 3 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 45 Day(s) or more | 10 Day(s) or more | 11 Day(s) | 34 Day(s) or more | 10 Day(s) or more | 13 Day(s) or more | 47 Day(s) or more |
| Shaft Diameter(mm) | 2.34 ～ 3 | 3 | - | 3 | 6 | 3 | ⌀3.0 | 3 | 3 | 3 | 3 | 3 | 6.35 | 3 | 6.35 | 6.35 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 2.3 ～ 3 | 2.3 ～ 3 | 3 | 3 | - | - | 3 | 2.34 ～ 3 | 2.34 ～ 3 | 2.34 | 3 | 6 | 3 | 2.34 ～ 3 | 2.34 ～ 3 | 6 | 6 | 6 | 6 | 3 | - | - |
| Product Type | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush | Cup Type Brush |
| Outer Diameter(mm) | 14 | ø7.2 ～ ø14 | 23 | ø7.2 ～ ⌀25 | 50 ～ 75 | 14 | ⌀13 ～ ⌀20 | ø7.2 ～ ø14 | ø7.2 ～ ø14 | ø7.2 ～ ø14 | ø8.5 ～ ⌀16 | 14 ～ 25 | 50 ～ 75 | 13 | 50 ～ 75 | 50 ～ 75 | 40 ～ 75 | 50 ～ 75 | 40 ～ 75 | 40 ～ 75 | 40 ～ 65 | 40 ～ 75 | 40 ～ 75 | 13 | 13 | 20 ～ 25 | 20 ～ 25 | 75 | 75 | 13 | 7 ～ 14 | 7 ～ 25 | 14 | 14 ～ 30 | 40 ～ 50 | 14 | 14 ～ 25 | 5 ～ 25 | 40 ～ 75 | 40 ～ 75 | 40 | 40 ～ 75 | 14 ～ 25 | 50 ～ 120 | 75 ～ 120 |
| Wire diameter(mm) | - | 0.2 | - | - | 0.15 ～ 0.3 | 0.12 | 0.15 ～ 0.2 to 0.5 | 0.15 | 0.2 | 0.3 | 0.1 | - | 0.3 | 0.1 ～ 0.3 | - | - | 0.25 | 0.3 | 0.3 | 0.15 | 0.9 | 0.7 | 0.5 | 0.1 | Black Hair | 0.15 | 0.15 | 0.7 | 0.5 | 0.1 | - | - | - | - | - | - | 0.1 ～ 0.15 | - | 0.3 | 0.15 | - | - | 0.1 | 0.25 | 0.7 |
| Brush Long(mm) | 7 | 5 ～ 8 | 1.5 | 5 ～ 15 | - | 7 | - | 5 ～ 8 | 5 ～ 8 | 5 ～ 8 | 5 ～ 8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 6 ～ 8 | 4.5 ～ 14 | 8 | 5 ～ 9 | 24 | 8 | 6 ～ 14 | 5 ～ 15 | 20 ～ 25 | 20 ～ 25 | 25 | 25 | 8 ～ 15 | 20 ～ 35 | 20 ～ 35 |
![GC Nylon Brush With Abrasive Grain, Wire Diameter [0.2 to 0.5 mm]](http://pre-my.misumi-ec.com/linked/material/fs/NNI1/PHOTO/223012368108.jpg?$product_view_c$)
![Chemical/Plant Fiber Brush (Heat-Resistant Fiber [Aramid])](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/223013449503/223013449503_001.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Shaft Diameter(mm)
-
Product Type
- Wheel Brush
- Flat brush
- Cup Type Brush
- End Brush
- Umbrella-shaped brush
- Flower Type Brush
- Bevel Type Brush
- Mini Brush
- Torsional brush
- Spiral brush
- Mounting adapter
-
Outer Diameter(mm)
-
Wire diameter(mm)
-
Brush Long(mm)
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- KURODA BRUSH (14)
- SUN POWER(TAIYO SHOKAI) (13)
- MINITOR (9)
- YANASE (9)
- NAKANISHI (5)
- TRUSCO NAKAYAMA (4)
- H & H (2)
- NIHONNSEIMITU (1)
- PFERD (1)
- SUMFLEX (1)
- ARC (0)
- ESCO (0)
- SK 11 (0)
- INDUSTRY KOWA (0)
- LESSMANN (0)
- MITSUTOMO (0)
- NARUTOYA (0)
- OSBORN (0)
CAD
-
- 2D
- 3D
Related Categories to Brushes with Shafts
-
- DIA/CBN Grinding Stones
- Grinding Stones for Flat Surfaces
- Grinding Stone Dressers
- Offset/Flexible Grinding Stones
- Disks
- Sheet Polishing Materials
- Belt Polishing Materials
- Grinding Stones with Shafts
- DIA/CBN Bars
- Ultra-Hard Bars
- Wheels with Shafts
- Brushes with Shafts
- Cup Brushes
- Hand Brushes
- Stick Grinding Stones
- Files
- Deburring Tools
- Polishing Materials / Pastes
- Polishing Materials for Grinders
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy