(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
ENGINEER Screwdrivers（Shaft type：Round）
| Days to Ship |
|
|---|
-
Screwdriver for Special Screw and for Pentalobular Screw
ENGINEER
A special screwdriver for pentalobe screws (star-shaped screws) used in smartphones, etc.
[Features]
·Tip size: 1.3 mm diameter (DTP-03), 1.7 mm diameter (DTP-07).
[Applications]
·Ideal for tightening and removing pentalobe screws (star-shaped screws).
·mobile phone, etc.Standard Price: MYR 78.30- Days to Ship: 9 Day(s) or more -
Screwdriver for Special Screw and for Y Type Screw
ENGINEER
Screwdriver supporting Y-type screws.
[Features]
· For special screws.
[Applications]
· It is possible to disassemble and repair game machines, mobile telephones, etc.
· For work removing and tightening Y-type screws.Standard Price: MYR 64.32- Days to Ship: 9 Day(s) -
ENGINEER
[Features]
· Loosens stripped screws, rusted screws and screws that are stuck by hammering.
· Can be hit with a hammer.
· Can also be turned and tightened using a wrench due to the 6.0 mm width across flat shaft.Standard Price: MYR 34.12- Days to Ship: 9 Day(s) -
LED Electrical Screwdriver DKD-03
ENGINEER
LED electrical test screwdriver that can perform conduction checks.
[Features]
· Bright LED inside the grip is turned on when the tip comes into contact with the live wire end of sockets for regular homes/factories.
· Includes a blade tip protection cap.
[Applications]
· For checking the conductivity of electric products.Standard Price: MYR 45.80 Days to Ship: 9 Day(s) -
ENGINEER
Standard-type Phillips screwdrivers and flathead screwdrivers.
[Features]
· Selection of various sizes is enabled in accordance with work applications.
[Applications]
· For work tightening and removing Phillips screws/flathead screws.Standard Price: MYR 9.97- Days to Ship: 9 Day(s) -
ENGINEER
A compact-type screwdriver.
[Features]
· 2-in-1, Phillips and flathead 2-way screwdriver bit.
· Compact type has a total length of 85 mm.
· The tip is a tough SK steel bit.
[Applications]
· Optimal for work in narrow locations where ordinary screwdrivers cannot reach.Standard Price: MYR 26.69 Days to Ship: 9 Day(s) -
ENGINEER
Selectable in accordance with work applications: dedicated screwdriver for hex screw and bolt tightening and removal.
[Features]
· Excellent resistance to abrasion.
· Adopts a plastic handle.
[Applications]
· For tightening and removing hex screws and bolts.Standard Price: MYR 13.17- Days to Ship: 9 Day(s) -
Standard Price: MYR 5.76- Days to Ship: 9 Day(s) -
ENGINEER
Knurled driver can perform rapid turning.
[Features]
· The shaft is made of chrome-vanadium steel, and the tip has undergone black point processing.
· A large grip that produces high clamping force.
[Applications]
· For tightening and removing various screws.Standard Price: MYR 23.10- Days to Ship: 9 Day(s) -
Mini Soft Screw Driver DG-21 – 24
ENGINEER
Mini soft screwdriver ideal for tightening and removing various screws.
[Features]
· It is a soft grip which fits well in the hand.
· The shaft is chrome-vanadium steel.
· The tip has been black-point processed.
[Applications]
· For tightening and removing various screws.Standard Price: MYR 32.11- Days to Ship: 8 Day(s) or more -
Long Grip Screwdriver DG-11 – 14
ENGINEER
Cushion grip screwdriver that perfectly fits the hand with outstanding tightening force.
[Features]
· The shaft is chrome-vanadium steel.
· The tip has been black-point processed.
[Applications]
· For tightening and removing various screws.Standard Price: MYR 59.45- Days to Ship: 8 Day(s) -
Electroscopic Screwdriver DKD-01/DKD-02
ENGINEER
Screwdriver for low voltage and automobile spark plug electrical inspection.
[Features]
· With a clip, it is convenient for carrying around.
· The built-in neon tube lights up.
[Applications]
· DKD-01: Ideal for conductivity and wireless communicator transmission tests.
· DKD-02: Ideal for vehicle spark plug voltage detection.Standard Price: MYR 28.46 Days to Ship: 9 Day(s) -
Replacement Screwdriver (DK-51~53)
ENGINEER
+/- 2-WAY 2-in-1.
[Features]
· 2-in-1, Phillips and flathead 2-way screwdriver bit.Standard Price: MYR 17.09- Days to Ship: 9 Day(s) -
Replacement Screwdriver Set DK-05 – 08
ENGINEER
Replacement screwdriver set.
[Features]
· DK-05, 06 have a low voltage detecting grip. (80 – 300 VAC/100 – 250 VDC)
· The neon tube embedded inside the unit will light up if you make contact with the screwdriver tip and push the head part of the handle with your finger.
[Applications]
· Convenient for repair and maintenance work.Standard Price: MYR 91.26- Days to Ship: 9 Day(s) or more -
ENGINEER
This is a type of adjusting screwdriver with a 3 mm tip.
[Features]
· 3 mm tip type with semi-fixed resistance for trimmer capacitors.
· With a clip, it is convenient for carrying around.
[Applications]
· Ideal for adjusting electronic substrate circuit boards.Standard Price: MYR 28.95 Days to Ship: 9 Day(s) -
Adjustment Screwdriver (for High Frequency)
ENGINEER
This is a type of adjusting screwdriver with a 3 mm tip, which is used for high frequencies.
[Features]
· For high frequency.
· 3 mm tip type with semi-fixed resistance for trimmer capacitors.
· The tip is a tough SK material bit.
[Applications]
· Ideal for adjusting electronic substrate circuit boards.Standard Price: MYR 18.35- Days to Ship: 9 Day(s) -
Screwdriver for Special Screw and for Line Head Screw (for LH Screw)
ENGINEER
Screwdriver for line head screws.
[Features]
· For special screws.
[Applications]
· For removing and tightening screws in gaming machines, game software devices, etc.Standard Price: MYR 89.93- Days to Ship: 9 Day(s) -
ENGINEER
Wireless microphone jack and connectors can be attached and detached easily.
Standard Price: MYR 20.87- Days to Ship: 8 Day(s) -
Standard Price: MYR 20.87 Days to Ship: 8 Day(s) -
Ceramic Adjustment Screwdriver DA-48 – 52
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties.
· Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment. (Tip: +/- Bit, Shaft: Hex)
· Pencil-type portable design with caps for protecting tip.
[Applications]
· For audio equipment such as tuners and amplifiers, TVs, video cameras, and radio related equipment.
· For work related to wireless devices, computers and communications.Standard Price: MYR 121.07- Days to Ship: 8 Day(s) or more -
Ceramic Adjustable Screwdriver (With Rotating Cap)
ENGINEER
Ceramic adjustment screwdriver with a compact design ideal for trimmer adjustment with lines.
[Features]
· It can be adjusted at 2 locations, the tip portion (+/- bit), and the shaft portion (hexagonal type).
· High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.
· The compact design of the included rotating cap's compact handle makes it easy to use.
[Applications]
· For adjustment work of variable coil, IFT and trimmer.Standard Price: MYR 53.91- Days to Ship: 9 Day(s) -
Ceramic Adjustment Screwdriver, Detachable DA-72 – 79
ENGINEER
Thin-shaft ceramic adjustment screwdriver that's ideal for trimmer adjustment of deep areas.
[Features]
· High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.
· It can be adjusted at 2 locations, the tip portion (+/- bit), and the shaft portion (hexagonal type).
· Since the shaft portion and the handle can be detached, it is also possible to use it mounted on machines, etc.
[Applications]
· This fine shaft type is ideal for adjustment of chassis parts and other deep areas.Standard Price: MYR 85.03- Days to Ship: 9 Day(s) -
Ceramic Adjustment Screwdriver Set DK-90
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties. Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment (tip: Phillips, flathead bits / shank: hex).
· Pencil-type portable design with caps for protecting tip.
· 4 piece set of DA-48 and 50 to 52.
[Applications]
· For audio equipment such as tuners and amplifiers.
· For TV, video camera, radio-related, wireless equipment, computer-related facilities, communications equipment, etc.Standard Price: MYR 461.49 Days to Ship: 8 Day(s) -
Pro Grip Screwdriver DG-01 – 04
ENGINEER
Anti-slip cushion grip screwdriver with outstanding tightening force.
[Features]
· The shaft is chrome-vanadium steel.
· The tip has been black-point processed.
[Applications]
· For tightening and removing various screws.Standard Price: MYR 39.69- Days to Ship: 9 Day(s) or more -
ENGINEER
A mini soft screwdriver set with a soft grip which fits well in the hand.
[Features]
· It is a soft grip which fits well in the hand.
· The shaft is made of a special alloy steel used in the manufacturing industry, and has been hardened over the whole length.
· The tip has been black-point processed.
· It has a chrome plated finish.
[Applications]
· For tightening and removing various screws.Standard Price: MYR 113.28 Days to Ship: 8 Day(s) -
Replacement Screwdriver Set DK-50
ENGINEER
+/- 2-WAY bit for 2-in-1 interchangeable screwdriver set.
[Features]
· +/- 2-WAY 2-in-1 bit.
· 3-piece interchangeable screwdriver set.
[Applications]
· For tightening and removing various screws.Standard Price: MYR 69.30 Days to Ship: 9 Day(s) -
Screwdriver for Precision Special Screws DAP-01/DAP-02
ENGINEER
A compact design screwdriver for precision special screws.
[Features]
· The grip part has a rotating cap.
· Uses anti-slip knurling.
· DAP-01: For adjustment work of star-shaped screws (pentalobular screws).
· DAP-01: For smartphone strap attachment and repair.
[Applications]
· DAP-01: Ideal for accessory replacement of smartphones.
· DAT-02: Ideal for repair and maintenance of portable game machines.Standard Price: MYR 69.64 Days to Ship: 9 Day(s) -
Screwdriver For Special Screw and For Hexalobular Screw
ENGINEER
A screwdriver that supports all types of special screw for mobile phones, PHS, radio sets, PC, home game machines, etc.
[Features]
· There is a protrusion at the center of the screw hole, making it suitable for tampering and theft prevention.
· It is widely used in cordless telephones / radios / precision instruments, etc.
[Applications]
· For the maintenance of mobile phones, PHS, radio sets, PC, home game machines, etc.Standard Price: MYR 48.94- Days to Ship: 9 Day(s) -
Screwdriver for Special Screw and for Line Recess Screw (for LR Screw)
ENGINEER
It supports special screws used in mobile phones, etc.
Standard Price: MYR 67.61 Days to Ship: 9 Day(s) -
Screwdriver Set for Special Screw
ENGINEER
Screwdriver bit series that supports various special screws.
[Features]
· Can be selected to suit the screw shape and application.
[Applications]
· For mobile phones, hard disks, toys, small radio controllers, etc.Standard Price: MYR 36.44- Days to Ship: 9 Day(s) -
ENGINEER
Screwdriver bit series special screw bit set that supports various special screws.
[Features]
· 10-piece set of DR-81 to 93.
· With bit holder.
[Applications]
· For all types of maintenance of mobile phones, PHS, radio sets, PC, home game machines, etc.Standard Price: MYR 356.00 Days to Ship: 9 Day(s) -
ENGINEER
[Features]
· Ideal for installing and removing precision screws.
· Handle includes rotation cap for quick turning.
· With anti-slip knurling.Standard Price: MYR 22.18 Days to Ship: 9 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER |
| Product Series | Screwdriver for Special Screw and for Line Head Screw (for LH Screw) | Screwdriver for Special Screw and for Line Recess Screw (for LR Screw) | ||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) or more | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) |
| Tip standards | Other | Other | Phillips (+) / Flathead (-) | Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Box | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) / Box / Combination | Flathead (-) | Flathead (-) | Other | Other | Phillips (+) / Flathead (-) | Flathead (-) / Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Torx / Other | Torx | Torx | Torx / Other | Combination | Flathead (-) |
| Tip size / Phillips (+) | - | - | No.2 | - | No.00 / No.0 / No.1 / No.2 | No.2 | - | No.000 | No.00 / No.0 / No.1 / No.2 | No.00 / No.0 | No.2 | - | No.00 / No.1 / No.2 | No.00 / No.0 / No.1 / No.2 / No.3 | - | - | - | - | No.2 | Other | Other | Other | Other | No.1 / No.2 | No.00 / No.0 | No.00 / No.1 / No.2 | - | - | - | - | - | - |
| Tip size / flathead (-) blade width (mm) B1 | - | - | 6.35 | 3 | 2.6 ～ 5.5 | 6.3 | - | 1.6 | 3 ～ 5.5 | 3 ～ 4 | 6 | - | 2.6 ～ 6 | 3.5 ～ 5.5 | 2 | 2 | - | - | 6.3 | 0.8 ～ 2.5 | 0.9 ～ 2.5 | 0.8 ～ 2.5 | 0.8 ～ 2.5 | 5.5 ～ 6.3 | 3 ～ 4 | 2.6 ～ 6 | - | - | - | - | - | - |
| Shaft length L (mm) | 75 ～ 100 | 75 | 102 ～ 152 | 20 | 50 ～ 150 | 23 | 75 ～ 125 | 30 | 75 ～ 100 | 80 | 225 ～ 275 | 28 | 67 ～ 89 | - | 16 ～ 24 | 100 ～ 150 | 90 | 75 | 38 | - | 15 ～ 18 | 15 ～ 20 | - | 76 ～ 80 | 80 | 67 ～ 89 | 23 | 75 ～ 100 | 75 | - | - | - |
| Single Product/Set Classification | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Set Product | Set Product | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item |
| Shaft type | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round |
| Magnet | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | Available | Available | - |
| Shaft through | NA | NA | Available | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | - | - | - |
| Bolster | NA | NA | - | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | - | - | - |
| Grip Type | Resin | Resin | - | Resin | Resin | Resin | Resin | Resin | Resin | Rubber | Rubber | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Rubber | Rubber | Resin | Rubber | Resin | Resin | - | - | - |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | 0.4 | 0.35 ～ 0.7 | - | - | 0.3 | 0.35 ～ 0.7 | 0.4 ～ 0.5 | 0.8 | - | - | - | 0.5 | 0.5 | - | - | 0.9 | 0.35 ～ 0.7 | 0.35 ～ 0.7 | 0.35 ～ 0.7 | 0.35 ～ 0.7 | 0.7 ～ 0.9 | 0.4 ～ 0.5 | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | 3 ～ 12 | - | - | - | - | - | - | 4 ～ 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 33
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 280
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- PB SWISS TOOLS (95)
- VESSEL (67)
- ANEX (32)
- ENGINEER (32)
- WERA (30)
- KTC(KYOTO TOOL) (19)
- HOZAN (17)
- TONE (15)
- TRUSCO NAKAYAMA (15)
- WIHA (15)
- HIRAI KOGU (9)
- SUNFLAG (7)
- KO-KEN TOOL (6)
- SK 11 (4)
- EIGHT TOOL (3)
- HAZET (2)
- TOP (2)
- FUJIYA (1)
- MITOLOY (1)
- SMATO (1)
- SIGNET (1)
- TRAD (1)
- ARC (0)
- HANDIWORK (0)
- E VALUE (0)
- HIOS (0)
- SUEKAGE TOOL (0)
- AS ONE (0)
- BONDHUS (0)
- ESCO (0)
- WILLIAMS (0)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy