(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
KYOCERA Turning Inserts
| Days to Ship |
|
|---|
-
Standard Price: MYR 76.88- Days to Ship: 4 Day(s) or more -
Kyocera Turning Insert PV720 PVD Cermet
KYOCERA
[Features]
· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.
· Realizes both high-efficiency machining and a high-grade finished surface.
[Applications]
· For lathe turning
· PV720: The foremost recommended PVD cermet for steel machiningStandard Price: MYR 40.31- Days to Ship: 10 Day(s) or more -
Kyocera Turning Insert PV720 PVD Cermet
KYOCERA
[Features]
· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.
· Realizes both high-efficiency machining and a high-grade finished surface.
[Applications]
· For lathe turning
· PV720: The foremost recommended PVD cermet for steel machiningStandard Price: MYR 31.11 Days to Ship: 10 Day(s) -
Kyocera Turning Insert PV720 PVD Cermet (TNGG/TNMG)
KYOCERA
[Features]
· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.
· Realizes both high-efficiency machining and a high-grade finished surface.
[Applications]
· For lathe turning
· PV720: The foremost recommended PVD cermet for steel machiningStandard Price: MYR 31.11- Days to Ship: 10 Day(s) or more -
Tip for Lathe, CBN Diamond, Positive DCMT
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 1
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· For Outer Diameter / Inner DiameterStandard Price: MYR 160.96- Days to Ship: 5 Day(s) or more -
Tip for Lathe, CBN Diamond, Positive VCMT
KYOCERA
[Specifications]
· Shape: V (35° Rhombus)
· Number of Available Corners: 1
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· For Outer Diameter / Inner DiameterStandard Price: MYR 188.89- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 89.21- Days to Ship: 5 Day(s) or more -
KTKF Type/KTKF Type Space Holder Conforming Tip
KYOCERA
The right-handed (R) holder conforms to right-handed (R) tips while the left-handed (L) holder conforms to left-handed (L) tips.
Standard Price: MYR 110.55- Days to Ship: 6 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 52.49- Days to Ship: 5 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCGT "Low-Feed"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 44.95- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 123.06- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 31.22- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 23.73- Days to Ship: 5 Day(s) or more -
S...KTTX Type (Sleeve Holder for External Diameter) Compatible Tip
KYOCERA
When machining can be performed at many pitches with a single insert, use the TT type.
Standard Price: MYR 115.96- Days to Ship: 5 Day(s) or more -
Diamond Shape 35° / Positive With Hole VBMT
KYOCERA
[Specifications]
· Shape: V (35° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 39.64- Days to Ship: 5 Day(s) or more -
Kyocera Insert for Thread Cutting, PVD Coating PR1115
KYOCERA
[Features]
· PR1115: With superior oxidation resistance and a good balance of wear resistance and fracture resistance.
· For grooving, cutting off, and threading steel and stainless steel.
[Applications]
· For threading
· Inner Diameter Metric Thread [M]
· PR1115: The foremost recommended material for steel and stainless steel threadingStandard Price: MYR 101.02 Days to Ship: 10 Day(s) -
Kyocera Turning Insert PR1225 PVD Coating
KYOCERA
[Features]
· PR1225: Ultrafine particle carbide substrate and MEGACOAT with superior wear resistance and heat resistance.
· Supports a wide range from carbon steel to stainless steel.
[Applications]
· For lathe turning
· PR1225: The foremost recommended PVD coating for stainless steel precision machiningStandard Price: MYR 68.93- Days to Ship: 10 Day(s) -
Kyocera Cutting Insert PR1535 PVD Coating
KYOCERA
[Features]
· PR1535: Uses "MEGACOAT NANO", a special nano-laminated coating, to improve wear resistance and stability.
[Applications]
· For Cutting Off
· PR1535: Stainless steel cutoff machining (foremost recommended material)Standard Price: MYR 73.41- Days to Ship: 9 Day(s) or more -
Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PG "for Intermediate to Rough Cutting"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium to Heavy CuttingStandard Price: MYR 48.57- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 61.10- Days to Ship: 7 Day(s) or more -
Standard Price: MYR 770.34- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 156.58- Days to Ship: 5 Day(s) or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PQ "for Finishing to Intermediate Cutting"
KYOCERA
[Work materials]
· Carbon steel and alloy steel
· Stainless steel
[Insert Grade]
· Cermet (TN6010, TN6020)
· MEGACOAT cermet (PV7010, PV7025)
· CVD coating (CA515, CA525, CA5515, CA5525)Standard Price: MYR 36.64 Days to Ship: 5 Day(s) or more -
Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PP "for Finishing"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 48.37- Days to Ship: 5 Day(s) or more -
60° Triangle Negative with Hole TNMG22○○PS "Medium to Rough"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 6
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium to Heavy CuttingStandard Price: MYR 52.85- Days to Ship: 8 Day(s) or more -
60° Triangle Negative with Hole TNGG16○○-C "Medium to Rough"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 6
· Rake Angle: Negative
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Heavy CuttingStandard Price: MYR 29.45- Days to Ship: 5 Day(s) or more -
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 68.71- Days to Ship: 8 Day(s) or more -
Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Finishing to Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 26.10- Days to Ship: 5 Day(s) or more -
DCGT-J, 55° rhombus, positive, with hole, turning tip
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 53.68- Days to Ship: 5 Day(s) or more -
60° Triangle Positive with Hole TBGT "Finishing"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 3
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 50.23- Days to Ship: 5 Day(s) or more -
60° Triangle Positive without Hole TPMN without Breaker "Cast Iron"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 3
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 27.87- Days to Ship: 7 Day(s) or more -
Diamond Shape 80° / Positive CBN Diamond CCMW
KYOCERA
[Specifications]
· Shape: C (80° Diamond)
· Rake Angle: Positive
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.Standard Price: MYR 177.83- Days to Ship: 5 Day(s) or more -
Diamond Shape 35° / Positive CBN Diamond VBGW
KYOCERA
[Specifications]
· Shape: V (35° Diamond)
· Rake Angle: Positive
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.Standard Price: MYR 177.83- Days to Ship: 6 Day(s) or more -
Tip for Lathe, CBN Diamond, Positive TPGB
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 1
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· For Outer Diameter / Inner DiameterStandard Price: MYR 133.38- Days to Ship: 5 Day(s) or more -
Kyocera Turning Insert CA5525 CVD Coating
KYOCERA
[Features]
· CA5525: The fine columnar structure improves fracture and wear resistance and allows highly reliable machining.
· Applicable for rough to intermittent machining of steel.
[Applications]
· For lathe turning
· CA5525: General purpose grade supporting rough to intermittent machining of steelStandard Price: MYR 50.13 Days to Ship: 10 Day(s) -
Kyocera Insert for Turning, PVD Coating PR930
KYOCERA
[Features]
· PR930: Ultra-fine particle carbide substrate and high-hardness TiCN coating for superior wear resistance.
· Supports machining steel at low speeds and precision machining of sharp cutting edges.
[Applications]
· For lathe turning
· PR930: For low-speed machining of steel and stainless steelStandard Price: MYR 34.54- Days to Ship: 10 Day(s) -
Kyocera Turning Insert CA510 CVD Coating
KYOCERA
[Features]
· CA510: Special substrate with excellent high-temperature distortion resistance properties and a tough, thick film coating with excellent abrasion resistance.
· Supports both high-speed and high-feed machining.
[Applications]
· For lathe turning
· CA510: High-speed/high-efficiency steel machiningStandard Price: MYR 36.30- Days to Ship: 8 Day(s) or more -
Kyocera Turning Insert PV720 PVD Cermet (CNMG/CPMH)
KYOCERA
[Features]
· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.
· Realizes both high-efficiency machining and a high-grade finished surface.
[Applications]
· For lathe turning
· PV720: The foremost recommended PVD cermet for steel machiningStandard Price: MYR 24.11- Days to Ship: 10 Day(s) -
Kyocera Turning Insert PV720 PVD Cermet (CPMH/CPMT)
KYOCERA
[Features]
· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.
· Realizes both high-efficiency machining and a high-grade finished surface.
[Applications]
· For lathe turning
· PV720: The foremost recommended PVD cermet for steel machiningStandard Price: MYR 24.11- Days to Ship: 10 Day(s) -
Kyocera Turning Insert TN620 Cermet (TNGG/TNMG)
KYOCERA
[Features]
· TN620: Special reinforcing technology (hybrid technology) achieves both superior fracture resistance and wear resistance.
· Achieves stable machining of steel and an excellent finished surface.
[Applications]
· For lathe turning
· TN620: The foremost recommended cermet for steel machiningStandard Price: MYR 27.83- Days to Ship: 10 Day(s) or more -
Kyocera Turning Insert PV720 PVD Cermet (TNMG/TPGB)
KYOCERA
[Features]
· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.
· Realizes both high-efficiency machining and a high-grade finished surface.
[Applications]
· For lathe turning
· PV720: The foremost recommended PVD cermet for steel machiningStandard Price: MYR 31.11- Days to Ship: 10 Day(s) -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PG "for Intermediate to Rough Cutting"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium to Heavy CuttingStandard Price: MYR 36.83- Days to Ship: 5 Day(s) or more -
Negative Type Wiper Tip DNMX (WF Breaker)
KYOCERA
[Features]
· New design wiper cutting blade shape achieves high efficiency machining
· WF breaker (improved machining efficiency)
· Supports high feed rates to reduce machining time
· Achieves high efficiency machining
· Excellent scrap processing performance over a wide range of machining tasksStandard Price: MYR 43.09- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 41.03- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 54.62- Days to Ship: 7 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Shape |
| work material |
| Application |
| Available corners |
| Breaker Use |
| Rake angle |
| Nose R |
| Selfishly |
| Groove Width (For Grooving / Plunging) |
| Pitch (for Threading) |
| O.D./ I.D. (For Threading) |
| Screw Types (for threading) |
| Number of threads (for threading) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
| Product Series | Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing" | Turning Insert Diamond 80°, Positive, with Hole, CCGT "Low-Feed" | S...KTTX Type (Sleeve Holder for External Diameter) Compatible Tip | Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PG "for Intermediate to Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PP "for Finishing" | 60° Triangle Negative with Hole TNMG22○○PS "Medium to Rough" | 60° Triangle Negative with Hole TNGG16○○-C "Medium to Rough" | Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Finishing to Intermediate Cutting" | 60° Triangle Positive without Hole TPMN without Breaker "Cast Iron" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PG "for Intermediate to Rough Cutting" | ||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 10 Day(s) or more | 10 Day(s) | 10 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 10 Day(s) | 10 Day(s) | 9 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 10 Day(s) | 10 Day(s) | 8 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) or more | 10 Day(s) | 5 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more |
| Shape | Other | - | - | - | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | Other | Other | C (80° Diamond-Shape) | C (80° Diamond-Shape) | Other | C (80° Diamond-Shape) | T (Triangle) | T (Triangle) | V (35° Diamond-Shaped) | - | - | - | D (55° Diamond-Shape) | D (55° Diamond-Shape) / Other | Other | C (80° Diamond-Shape) / D (55° Diamond-Shape) / T (Triangle) / V (35° Diamond-Shaped) / W (Hexagonal Type) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | T (Triangle) | - | - | - | - | - | - | - | C (80° Diamond-Shape) | D (55° Diamond-Shape) | R (Circular) | Other |
| work material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | - | - | - | Non-ferrous metal / Heat-resistant alloy, titanium alloy | Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material | Cast Iron / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | - | - | - | Steel / Stainless Steel / Heat-resistant alloy, titanium alloy | Cast Iron / High Hardness Material | High Hardness Material | Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel | Steel | Steel / Stainless Steel / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Cast Iron / High Hardness Material | Cast Iron / High Hardness Material | Non-ferrous metal / Heat-resistant alloy, titanium alloy | - | - | - | - | - | - | - | Steel / Stainless Steel / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy |
| Application | Grooving / Parting | - | - | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Other | Threading | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Grooving / Parting | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Threading | Outer Diameter/Inner Diameter | - | - | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Grooving / Parting | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - | - | - | - | - | - | - | Outer Diameter/Inner Diameter | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter |
| Available corners | - | - | - | - | 1 | 1 | - | - | 2 | 2 | - | - | - | - | 2 | - | - | - | 4 | - | 1 | 1 | 4 | 4 | 6 | 6 | 2 | 2 | 2 | 3 | 3 | 1 / 2 | 1 / 2 | 1 | - | - | - | - | - | - | - | 4 | - | 9 or more | 2 |
| Breaker Use | - | Finish / Light Cutting | Finish | Finish / Medium grinding / Light Cutting | - | - | - | - | Finish | Medium grinding | - | - | - | - | Finish / Medium grinding | - | Finish | - | Medium to deep grinding | - | - | - | Medium grinding | Finish | Medium to deep grinding | Heavy cutting | Medium grinding | Medium grinding | Medium grinding | Finish | Medium grinding | - | - | - | Light Cutting | Finish / Medium grinding | Finish / Medium grinding / Light Cutting | Finish / Medium grinding / Light Cutting | Finish | Finish / Light Cutting | Finish / Light Cutting | Medium to deep grinding | Finish | Medium grinding | Finish |
| Rake angle | - | - | - | - | Pozidriv | Pozidriv | - | - | Pozidriv | Pozidriv | - | Negative | Negative | - | Pozidriv | - | - | - | Negative | Negative | Pozidriv | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | - | - | - | - | - | - | - | Negative | Negative | Negative | Pozidriv |
| Nose R | 0.2 ～ Other | - | - | - | 0.2 ～ Other | 0.2 ～ 0.8 | Other | Other | 0.2 ～ Other | 0.2 ～ Other | Other | 0.4 ～ 1.6 | 0.4 ～ 1.2 | Other | 0.2 ～ 1.2 | - | - | - | 0.4 ～ 1.6 | 0.4 ～ 1.6 | 0.2 ～ 0.4 | 0.2 ～ 1.2 | 0.4 ～ 1.2 | 0.2 ～ 1.2 | 0.4 ～ 1.6 | 0.4 ～ 1.2 | 0.2 ～ 0.8 | 0.2 ～ 0.8 | 0.2 ～ Other | 0.2 ～ Other | 0.4 ～ 1.2 | 0.2 ～ 0.8 | 0.2 ～ 0.8 | 0.2 ～ Other | - | - | - | - | - | - | - | 0.4 ～ 1.6 | 0.4 ～ 1.2 | - | 0.2 ～ Other |
| Selfishly | Right-hand / Left-hand | - | - | - | No-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand | No-hand | - | - | - | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | No-hand | No-hand | - | - | - | - | - | - | - | No-hand | - | No-hand | Right-hand / Left-hand |
| Groove Width (For Grooving / Plunging) | 0.5 ～ 4.8 | - | - | - | - | - | - | - | - | - | 1 ～ 4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch (for Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D./ I.D. (For Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Types (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of threads (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Shape
-
work material
-
Application
-
Available corners
-
Breaker Use
-
Rake angle
-
Nose R
-
Selfishly
-
Groove Width (For Grooving / Plunging)
-
Pitch (for Threading)
-
O.D./ I.D. (For Threading)
-
Screw Types (for threading)
-
Number of threads (for threading)
Narrow search by specifying Manufacturer
-
- MISUMI (5)
- SUMITOMO ELECTRIC HARDMETAL (636)
- KYOCERA (590)
- SANDVIK (220)
- NGK SPARK PLUG (84)
- ISCAR (39)
- BIG DAISHOWA SEIKI (8)
- SANWA SEISAKUSYO (8)
- OSG (4)
- DIJET (1)
- ECHAIN (1)
- KOSHUHA (1)
- NOGA JAPAN (1)
- TUNGALOY (1)
- WIDIA (1)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy