(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
KTC(KYOTO TOOL) Socket Wrenches（Socket shape：6 Sq.）
| Days to Ship |
|
|---|
-
Socket Wrench, Deep Socket (Hex Type)
KTC(KYOTO TOOL)
[Features]
· KTC unique Power Fit has been adopted.
· Since it is a through-hole type model, it is ideal for working with nuts and recessed parts where bolts protrude.Standard Price: MYR 59.29- Days to Ship: 5 Day(s) or more -
KTC(KYOTO TOOL)
[Features]
· Wrench capable of working with 4 sizes of bolts and nuts.
[Applications]
· Wheel Nut WrenchStandard Price: MYR 372.36- Days to Ship: 9 Day(s) -
Socket wrench set (6 sided type / 6.3 mm Insertion Angle)
KTC(KYOTO TOOL)
[Features]
· Layout designed with user-friendliness in mind to meet the needs of the user.
· The tray is difficult to break, made from a sturdy and durable resin mold.Standard Price: MYR 581.14- Days to Ship: 5 Day(s) or more -
Deep socket wrench set (hex type / 6.3 mm Insertion Angle)
KTC(KYOTO TOOL)
[Features]
· Layout designed with user-friendliness in mind to meet the needs of the user.
· The tray is difficult to break, made from a sturdy and durable resin mold.
[Applications]
· General purpose toolStandard Price: MYR 1,237.28 Days to Ship: 8 Day(s) -
KTC Socket Set (Hex Type With Holder)
KTC(KYOTO TOOL)
[Features]
· KTC unique Power Fit has been adopted to both aperture and drive.
[Applications]
· General purpose toolStandard Price: MYR 254.68- Days to Ship: 8 Day(s) -
Socket set (hex type / 9.5 mm Insertion Angle / includes holder)
KTC(KYOTO TOOL)
[Features]
· KTC unique Power Fit has been adopted to both aperture and drive.
[Applications]
· General purpose toolStandard Price: MYR 232.46- Days to Ship: 8 Day(s) or more -
Socket set (12.7 mm Insertion Angle / includes holder)
KTC(KYOTO TOOL)
[Features]
· KTC unique Power Fit has been adopted to both aperture and drive.
[Applications]
· General purpose toolStandard Price: MYR 278.10- Days to Ship: 8 Day(s) -
Deep socket set (hex type / 6.3 mm Insertion Angle / with holder)
KTC(KYOTO TOOL)
[Features]
· KTC unique Power Fit has been adopted to both aperture and drive.
[Applications]
· General purpose toolStandard Price: MYR 363.61- Days to Ship: 8 Day(s) -
Deep socket set (hex type / 9.5 mm Insertion Angle / with holder)
KTC(KYOTO TOOL)
[Features]
· KTC unique Power Fit has been adopted to both aperture and drive.
[Applications]
· General purpose toolStandard Price: MYR 418.81- Days to Ship: 8 Day(s) -
Deep socket set (hex type / 12.7 mm Insertion Angle / with holder)
KTC(KYOTO TOOL)
[Features]
· KTC unique Power Fit has been adopted to both aperture and drive.
[Applications]
· General purpose toolStandard Price: MYR 505.58- Days to Ship: 5 Day(s) or more -
Socket Wrench, Socket (Hex Type)
KTC(KYOTO TOOL)
[Features]
· A standard type which is of a compact design with a shorter overall length than conventional products, easy to work in narrow places.
· KTC unique Power Fit has been adopted to both aperture and drive.Standard Price: MYR 28.74- Days to Ship: 5 Day(s) or more -
KTC(KYOTO TOOL)
[Features]
· A standard type which is of a compact design with a shorter overall length than conventional products, easy to work in narrow places.
· KTC unique Power Fit has been adopted to both aperture and drive.
[Applications]
· General purpose toolStandard Price: MYR 35.54- Days to Ship: 5 Day(s) or more -
Semi-deep socket (6 sided type / 9.5 mm Insertion Angle)
KTC(KYOTO TOOL)
[Features]
· It is a semi-deep type with an intermediate role between the standard and deep types.
· KTC unique Power Fit has been adopted to both aperture and drive.
[Applications]
· General purpose toolStandard Price: MYR 47.96- Days to Ship: 9 Day(s) -
6.3sq. /9.5sq. /12.7sq. Deep socket (hex)
KTC(KYOTO TOOL)
[Features]
· KTC unique Power Fit has been adopted.
· Since it is a through-hole type model, it is ideal for working with nuts and recessed parts where bolts protrude.Standard Price: MYR 85.70- Days to Ship: 9 Day(s) or more -
KTC(KYOTO TOOL)
[Features]
· The size is engraved in the upper part of the handle, making it easy to check when hanging from a holder.
[Applications]
· General purpose toolStandard Price: MYR 84.03- Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Features]
· The size is engraved in the upper part of the handle, making it easy to check when hanging from a holder.
· The handle is shorter than general products, making it convenient for rapid spinning in confined spaces.
[Applications]
· General purpose toolStandard Price: MYR 79.26- Days to Ship: 9 Day(s) -
T-Shaped Flex Wrench (Magnetic)
KTC(KYOTO TOOL)
[Features]
· T-shaped wrench with a magnet.
[Applications]
· General purpose toolStandard Price: MYR 283.20- Days to Ship: 9 Day(s) -
T-Shaped Flex Wrench Long (Magnetic)
KTC(KYOTO TOOL)
[Features]
· Socket contains magnet to securely hold bolts and nuts.
[Applications]
· General purpose toolStandard Price: MYR 315.33- Days to Ship: 9 Day(s) -
Impact Wrench Socket (Insertion Angle 9.5 mm / Semi-Deep Thin Type)
KTC(KYOTO TOOL)
[Features]
· The AMBAC system prevents pins from popping out during use.
· The PowerFit system prevents the bolts and nuts from stripping.
· An easy-to-see size indication is provided along with engraving.
· New type of ring also allows pins and rings to be easily installed.Standard Price: MYR 54.18- Days to Ship: 9 Day(s) -
Impact Wrench Socket (Insertion Angle 9.5 mm / Deep Thin Type)
KTC(KYOTO TOOL)
[Features]
· Thin type that can be easily used in narrow places.
· The AMBAC system prevents pins from popping out during use.
· The PowerFit system prevents the bolts and nuts from stripping.
· An easy-to-see size indication is provided along with engraving.
· New type of ring also allows pins and rings to be easily installed.Standard Price: MYR 69.58- Days to Ship: 9 Day(s) -
Impact Wrench Socket (Insertion Angle 12.7 mm) With Pin/Ring
KTC(KYOTO TOOL)
[Features]
· The AMBAC system prevents pins from popping out during use.
· The PowerFit system prevents the bolts and nuts from stripping.
· An easy-to-see size indication is provided along with engraving.
· New type of ring also allows pins and rings to be easily installed.Standard Price: MYR 49.91- Days to Ship: 9 Day(s) or more -
Impact Wrench Socket (Insertion Angle 12.7 mm / Semi-Deep Thin Type)
KTC(KYOTO TOOL)
[Features]
· The AMBAC system prevents pins from popping out during use.
· The PowerFit system prevents the bolts and nuts from stripping.
· An easy-to-see size indication is provided along with engraving.
· New type of ring also allows pins and rings to be easily installed.
· It is a semi-deep thin type with an intermediate role between the standard and deep types.
[Applications]
· Impact wrench socketStandard Price: MYR 66.33- Days to Ship: 9 Day(s) -
Impact Wrench Socket (Insertion Angle 12.7 mm / Deep Thin Type)
KTC(KYOTO TOOL)
[Features]
· Thin type that can be easily used in narrow places.
· The AMBAC system prevents pins from popping out during use.
· The PowerFit system prevents the bolts and nuts from stripping.
· New type of ring also allows pins and rings to be easily installed.Standard Price: MYR 88.50- Days to Ship: 9 Day(s) -
Impact Wrench Socket (Insertion Angle 19.0 mm)
KTC(KYOTO TOOL)
[Features]
· The AMBAC system prevents pins from popping out during use.
· The PowerFit system prevents the bolts and nuts from stripping.
· An easy-to-see size indication is provided along with engraving.
· New type of ring also allows pins and rings to be easily installed.Standard Price: MYR 106.25- Days to Ship: 5 Day(s) or more -
Impact Wrench Socket (Insertion Angle 19.0 mm / Deep Thin Type)
KTC(KYOTO TOOL)
[Features]
· Thin type that can be easily used in narrow places.
· The PowerFit system prevents the bolts and nuts from stripping.Standard Price: MYR 173.33- Days to Ship: 9 Day(s) -
Impact Wrench Socket (Insertion Angle 25.4 mm)
KTC(KYOTO TOOL)
[Features]
· The AMBAC system prevents pins from popping out during use.
· The PowerFit system prevents the bolts and nuts from stripping.
· An easy-to-see size indication is provided along with engraving.
· New type of ring also allows pins and rings to be easily installed.Standard Price: MYR 208.58- Days to Ship: 9 Day(s) or more -
Impact Wrench Socket (Insertion Angle 25.4 mm / Deep Thin Type)
KTC(KYOTO TOOL)
[Features]
· Thin type that can be easily used in narrow places.
· The PowerFit system prevents the bolts and nuts from stripping.Standard Price: MYR 279.45- Days to Ship: 5 Day(s) or more -
Long Socket For Impact Wrench (Insertion Angle 9.5 mm / Thin Type)
KTC(KYOTO TOOL)
[Features]
· The AMBAC system prevents pins from popping out during use.
· The PowerFit system prevents the bolts and nuts from stripping.
· New type of ring also allows pins and rings to be easily installed.
[Applications]
· Impact wrench socketStandard Price: MYR 177.43- Days to Ship: 9 Day(s) or more -
Long Socket For Impact Wrench (Insertion Angle 12.7 mm / Thin Type)
KTC(KYOTO TOOL)
[Features]
· The AMBAC system prevents pins from popping out during use.
· The PowerFit system prevents the bolts and nuts from stripping.
· New type of ring also allows pins and rings to be easily installed.
[Applications]
· Impact wrench socketStandard Price: MYR 203.53- Days to Ship: 9 Day(s) -
Universal Joint Socket For Impact (Insertion Angle: 12.7 mm)
KTC(KYOTO TOOL)
[Features]
· The AMBAC system prevents pins from popping out during use.
· The PowerFit system prevents the bolts and nuts from stripping.
· New type of ring also allows pins and rings to be easily installed.
[Applications]
· Impact wrench socketStandard Price: MYR 375.36- Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Features]
· A standard type with a shorter overall length and more compact design than with conventional products, making it easier to work with in tight spaces.
· KTC's own unique Power Fit shape has been employed for both the aperture part and the square drive.Standard Price: MYR 83.65- Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Features]
· Uses KTC's own unique Power Fit shape.
· A pass-through type that is ideal for work on nuts with protruding bolts or in recessed spots.Standard Price: MYR 99.45- Days to Ship: 8 Day(s) or more -
Socket For Impact Wrench (Square Drive 9.5 mm, Semi-Deep Thin Type)
KTC(KYOTO TOOL)
[Features]
· Employs the AMBAC system to prevent the pin from jumping out during use.
· Employs Power Fit to prevent the bolts and nuts from slipping.
· Features an easily visible size display in addition to the engraving.
· The new ring type makes it easy to attach the pin and ring.Standard Price: MYR 104.65- Days to Ship: 8 Day(s) or more -
Socket For Impact Wrench (Square Drive 9.5 mm, Deep Thin Type)
KTC(KYOTO TOOL)
[Features]
· A thin type that is easy to use in tight spaces.
· Employs the AMBAC system to prevent the pin from jumping out during use.
· Employs Power Fit to prevent the bolts and nuts from slipping.
· Features an easily visible size display in addition to the engraving.
· The new ring type makes it easy to attach the pin and ring.Standard Price: MYR 118.31- Days to Ship: 8 Day(s) or more -
Socket For Impact Wrench (Square Drive 12.7 mm)
KTC(KYOTO TOOL)
[Features]
· Employs the AMBAC system to prevent the pin from jumping out during use.
· Employs Power Fit to prevent the bolts and nuts from slipping.
· Features an easily visible size display in addition to the engraving.
· The new ring type makes it easy to attach the pin and ring.Standard Price: MYR 94.11- Days to Ship: 8 Day(s) or more -
Socket For Impact Wrench (Square Drive 12.7 mm, Deep Thin Type)
KTC(KYOTO TOOL)
[Features]
· A thin type that is easy to use in tight spaces.
· Employs the AMBAC system to prevent the pin from jumping out during use.
· Employs Power Fit to prevent the bolts and nuts from slipping.
· The new ring type makes it easy to attach the pin and ring.Standard Price: MYR 133.48- Days to Ship: 9 Day(s) -
Socket For Impact Wrench (Square Drive 12.7 mm, Semi-Deep Thin Type)
KTC(KYOTO TOOL)
[Features]
· Employs the AMBAC system to prevent the pin from jumping out during use.
· Employs Power Fit to prevent the bolts and nuts from slipping.
· Features an easily visible size display in addition to the engraving.
· The new ring type makes it easy to attach the pin and ring.
· A thin and semi-deep type that acts as the intermediate type between the standard and deep types.
[Applications]
· Socket for impact wrenchesStandard Price: MYR 117.45- Days to Ship: 8 Day(s) or more -
KTC(KYOTO TOOL)
[Features]· The size is engraved on the upper surface of the handle, making it easy to check when hung from a tool station, etc.
Standard Price: MYR 125.86- Days to Ship: 8 Day(s) or more -
KTC(KYOTO TOOL)
[Applications]
· Tightening & loosening of bolts and nuts that are either long and jut out or are in hard to reach areas.
[Applications]
· Rear bumper cover attachment bolts for automobiles, attachment bolts inside door knobs, bolts on door hinges, side louver attachment bolts.
· Automobile bumper reinforcement attachment bolts, air bag adjusting bolts, tension pulley adjusting bolts.
· Attachment bolts and nuts for automobile undercarriages.
· Other recessed spots where work is difficult with an open end wrench, offset wrench, deep socket, etc.Standard Price: MYR 173.61 Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· Tightening & loosening of bolts and nuts that are either long and jut out or are in hard to reach areas.
[Applications]
· Rear bumper cover attachment bolts for automobiles, attachment bolts inside door knobs, bolts on door hinges, side louver attachment bolts.
· Automobile bumper reinforcement attachment bolts, air bag adjusting bolts, tension pulley adjusting bolts.
· Attachment bolts and nuts for automobile undercarriages.
· Other recessed spots where work is difficult with an open end wrench, offset wrench, deep socket, etc.Standard Price: MYR 274.56 Days to Ship: 9 Day(s) -
Standard Price: MYR 138.78- Days to Ship: 8 Day(s) -
12.7 sq. Socket for Aluminum Wheels
KTC(KYOTO TOOL)
[Applications]
· A dedicated socket for tightening and loosening aluminum automobile wheel nuts.
· A thin type with rubber cushioning for helping prevent damage to face nuts.Standard Price: MYR 162.76- Days to Ship: 9 Day(s) -
12.7 sq. Wheel Nut Socket Set For Impact Wrenches (Long And Thin) 【3 Pieces Per Package】
KTC(KYOTO TOOL)
[Applications]
· A dedicated socket wrench for tightening and loosening automobile wheel nuts. Compatible with impact wrenches.
[Features]
· Includes rubber cushioning to help prevent damage to plated and coated nuts.Standard Price: MYR 409.56 Days to Ship: 9 Day(s) -
12.7 sq. Dedicated Wheel Nut Socket
KTC(KYOTO TOOL)
[Applications]
· A dedicated socket for tightening and loosening automobile wheel nuts.
[Features]
· A dedicated design for use with wheels with an overall length of 100 mm.
Usability is improved by using in combination with a torque wrench.
· Includes rubber cushioning to help prevent damage to plated and coated nuts.
· The 22H is for the TOYOTA Land Cruiser 100 Series and the HONDA Legend (KB1).Standard Price: MYR 215.23- Days to Ship: 9 Day(s) -
12.7 sq. Dedicated Wheel Nut Long Socket
KTC(KYOTO TOOL)
[Applications]
· A dedicated socket for tightening and loosening automobile wheel nuts.
[Features]
· Long size optimal for recreational vehicles.
· The long size means no extension bar is required, improving workability.
· Includes rubber cushioning to help prevent damage to plated and coated nuts.Standard Price: MYR 280.36- Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Single Product/Set Classification |
| Application |
| Insertion Angle (Shaft measurement when electric drill) (mm) |
| Socket shape |
| Width across flat dimension (S Measurement) |
| Insertion Angle (Shaft measurement when electric drill) (Inch) |
| Overall length (L dimension)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) |
| Product Series | Socket set (hex type / 9.5 mm Insertion Angle / includes holder) | Deep socket set (hex type / 6.3 mm Insertion Angle / with holder) | Deep socket set (hex type / 9.5 mm Insertion Angle / with holder) | Deep socket set (hex type / 12.7 mm Insertion Angle / with holder) | Impact Wrench Socket (Insertion Angle 9.5 mm / Semi-Deep Thin Type) | Impact Wrench Socket (Insertion Angle 9.5 mm / Deep Thin Type) | Impact Wrench Socket (Insertion Angle 12.7 mm) With Pin/Ring | Impact Wrench Socket (Insertion Angle 12.7 mm / Semi-Deep Thin Type) | Impact Wrench Socket (Insertion Angle 12.7 mm / Deep Thin Type) | Impact Wrench Socket (Insertion Angle 19.0 mm / Deep Thin Type) | Impact Wrench Socket (Insertion Angle 25.4 mm / Deep Thin Type) | Long Socket For Impact Wrench (Insertion Angle 9.5 mm / Thin Type) | Long Socket For Impact Wrench (Insertion Angle 12.7 mm / Thin Type) | Universal Joint Socket For Impact (Insertion Angle: 12.7 mm) | Socket For Impact Wrench (Square Drive 9.5 mm, Semi-Deep Thin Type) | Socket For Impact Wrench (Square Drive 9.5 mm, Deep Thin Type) | Socket For Impact Wrench (Square Drive 12.7 mm, Deep Thin Type) | Socket For Impact Wrench (Square Drive 12.7 mm, Semi-Deep Thin Type) | 12.7 sq. Wheel Nut Socket Set For Impact Wrenches (Long And Thin) 【3 Pieces Per Package】 | ||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) or more | 9 Day(s) | 9 Day(s) | 5 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more |
| Single Product/Set Classification | Single Item Socket | Single Item Handle | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Single Item Socket | Single Item Socket | Single Item Socket | Single Item Socket | Single Item Handle | Single Item Handle | Single Item Handle | Single Item Handle | Single Item Socket | Single Item Socket | Single Item Socket | Single Item Socket | Single Item Socket | Single Item Socket | Single Item Socket | Single Item Socket | Single Item Socket | Single Item Socket | Single Item Socket | Single Item Socket | Single Item Socket | Single Item Socket | Single Item Socket | Set Product | Single Item Socket | Single Item Socket | Single Item Socket | Single Item Handle | Single Item Socket | Set Product | Single Item Socket | Single Item Socket | Set Product | Single Item Socket | Single Item Socket |
| Application | For handwork | For handwork | For handwork | For handwork | For handwork | For handwork | For handwork | For handwork | For handwork | For handwork | For handwork | For handwork | For handwork | For handwork | For handwork | For handwork | For handwork | For handwork | For Impact | For Impact | For Impact | For Impact | For Impact | For Impact | For Impact | For Impact | For Impact | For Impact | For Impact | For Impact | For handwork | For handwork | For Impact | For Impact | For Impact | For Impact | For Impact | For handwork | For handwork | For handwork | For handwork | For handwork | For Impact | For handwork | For handwork |
| Insertion Angle (Shaft measurement when electric drill) (mm) | 6.3 ～ 12.7 | - | 6.3 | 6.3 | 6.3 | 9.5 | 12.7 | 6.3 | 9.5 | 12.7 | 6.3 ～ 12.7 | 6.3 ～ 12.7 | 9.5 | 9.5 ～ 12.7 | - | - | - | - | 9.5 | 9.5 | 12.7 | 12.7 | 12.7 | 19 | 19 | 25.4 | 25.4 | 9.5 | 12.7 | 12.7 | 6.3 | 6.3 | - | - | - | - | - | - | 9.5 sq. | 9.5 sq. | 12.7 sq. | 12.7 sq. | 12.7 sq. | 12.7 sq. | 12.7 sq. |
| Socket shape | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. | 6 Sq. |
| Width across flat dimension (S Measurement) | 3.2 ～ 36 | 14 ～ 27 | 1/2 ～ 14 | 5 ～ 14 | 5 ～ 14 | 7 ～ 22 | 8 ～ 24 | 5 ～ 14 | 7 ～ 22 | 8 ～ 24 | 3.2 ～ 36 | 1 ～ 31/32 | 5.5 ～ 24 | 1 ～ 31/32 | 10 ～ 17 | 8 ～ 12 | 10 ～ 17 | 10 ～ 17 | 7 ～ 22 | 6 ～ 22 | 8 ～ 32 | 8 ～ 36 | 10 ～ 32 | 17 ～ 46 | 19 ～ 46 | 21 ～ 70 | 22 ～ 70 | 10 ～ 19 | 12 ～ 22 | 17 ～ 24 | 1 - 1/16 ～ 3/4 | 1 - 1/16 ～ 17/32 | 7 ～ 22 | 6 ～ 22 | 8 ～ 32 | 10 ～ 32 | 8 ～ 36 | 8 ～ 21 | 10 ～ 12 | - | 1/2 inch ～ 1/4 inch | 17 ～ 21 | BP49-17: 17, BP49-19: 19, BP49-21: 21 | 17 ～ 22 | 17 ～ 21 |
| Insertion Angle (Shaft measurement when electric drill) (Inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall length (L dimension)(mm) | 50 ～ 100 | 400 | - | - | - | - | - | - | - | - | 16 ～ 44 | 16 ～ 44 | 40 ～ 50 | 60 ～ 100 | 254.5 ～ 306 | 254 ～ 255 | 330 ～ 331 | 700 ～ 701 | 34 ～ 41 | 55 ～ 80 | 33 ～ 48 | 52 ～ 75 | 75 ～ 100 | 51 ～ 65 | 100 | 58 ～ 87 | 100 ～ 120 | 130 | 150 | 194 | 18 ～ 42 | 50 ～ 100 | 34 ～ 41 | 55 ～ 80 | 33.5 ～ 48 | 75 ～ 100 | 52 ～ 75 | 254 ～ 307 | 130 | 130 | 132 | - | 100 | 100 | - |
Loading...
Configure
Specification/Dimensions
-
Single Product/Set Classification
- Set Product
- Single Item Socket
- Single Item Handle
- Single Item Others
- Single Item Adapter
- Single Item Extension Bar
- Single Product Related Parts
- Single Item Universal Joint
- Set Product Related Parts
-
Application
-
Insertion Angle (Shaft measurement when electric drill) (mm)
-
Socket shape
- 4 Sq.
- 6 Sq.
- 8 Sq.
- 12 Sq.
- Double Hex/Joints
- Flathead (-)
- Hex for Hexagon socket head bolt
- Hex/joints for Hexagon socket head bolt
- Hex/joints/Phillips (+)/slotted (-) for Hexagon socket head bolt
- Hexagon/Double Hex
- Hexagon/Joints
- Hexagonal bit
- Hexagonal/Double Hex/Joints
- Hexagonal/Double Hex/Joints/Hexagonal bolt with hex socket
- Joint type
- Phillips (+)
- Screw
- Special
- Tap
- 4 Sq.
-
Width across flat dimension (S Measurement)
- 1
- 1 in
- 1-15/16
- 1-13/16
- 1-13/16 in
- 1-11/16
- 1-11/16 in
- 1-9/16
- 1-9/16 in
- 1-7/8
- 1-7/8 in
- 1-7/16
- 1-7/16 in
- 1-5/8
- 1-5/8 in
- 1-5/16 in
- 1-3/4
- 1-3/4 in
- 1-3/8
- 1-3/8 in
- 1-3/16
- 1-3/16 in
- 1-1/2
- 1-1/2 in
- 1-1/4
- 1-1/4 in
- 1-1/8
- 1-1/8 in
- 1-1/16
- 1-1/16 in
- 1 1/2
- 1 1/4
- 1 1/8
- 1 1/16
- 1 - 1/16
- 1/2
- 1/2 in
- 1/2 inch
- 1 3/4
- 1 3/8
- 1 3/16
- 1 - 3/16
- 1/4
- 1/4 in
- 1/4 inch
- 1 5/8
- 1 5/16
- 1 - 5/16
- 1 7/8
- 1 7/16
- 1/8
- 1/8 in
- 1 9/16
- 1 11/16
- 1 13/16
- 1 15/16
- 1.1/4
- 1.1/8
- 1.1/16
- 1.3/16
- 1.65
- 2
- 2 in
- 2 mm
- 2-5/16
- 2-3/8
- 2-3/16
- 2-3/16 in
- 2-1/4
- 2-1/4 in
- 2-1/8
- 2-1/8 in
- 2-1/16
- 2 1/2
- 2 1/4
- 2 1/8
- 2 1/16
- 2 3/4
- 2 3/8
- 2 3/16
- 2 5/8
- 2 5/16
- 2 7/8
- 2 7/16
- 2 9/16
- 2 11/16
- 2 13/16
- 2 15/16
- 2.3
- 2.48
- 2.5
- 2.5 mm
- 2.7
- 2.72
- 3
- 3 mm
- 3 1/2
- 3 1/4
- 3 1/8
- 3 1/16
- 3 3/4
- 3 3/8
- 3 3/16
- 3/4
- 3/4 in
- 3 7/8
- 3/8
- 3/8 in
- 3/16
- 3/16 in
- 3/32 in
- 3.2
- 3.26
- 3.3
- 3.625
- 3.7
- 3.83
- 3.84
- 3.86
- 3.9
- 4
- 4 mm
- 4 mm
- 4 1/2
- 4 1/4
- 4 1/8
- 4 3/4
- 4 3/8
- 4 5/8
- 4 7/8
- 4.37
- 4.40
- 4.5
- 4.5 mm
- 4.5 mm
- 4.6
- 4.72
- 4.875
- 4.9
- 4.96
- 5
- 5 mm
- 5 mm
- 5 1/2
- 5 1/4
- 5 1/8
- 5 3/4
- 5 3/8
- 5 5/8
- 5、5.5、6、7、8、9、10、12、13、14、17
- 5 7/8
- 5/8
- 5/8 in
- 5/16
- 5/16 in
- 5/32
- 5/32 in
- 5.49
- 5.5
- 5.5 mm
- 5.5 mm
- 5.59
- 5.6
- 5.69
- 6
- 6 mm
- 6 mm
- 6 1/2
- 6 1/4
- 6 1/8
- 6 3/4
- 6 3/8
- 6 5/8
- 6 7/8
- 6.1
- 6.17
- 6.3
- 6.3 mm square
- 6.35
- 6.35 mm
- 6.5
- 6.60
- 6.8
- 7
- 7 mm
- 7 mm
- 7 1/2
- 7 1/4
- 7 1/8
- 7 3/4
- 7 3/8
- 7 5/8
- 7 7/8
- 7/8
- 7/8 in
- 7/8 to 2
- 7/16
- 7/16 in
- 7/32
- 7/32 in
- 7.16
- 7.4
- 7.47
- 7.5
- 7.77
- 8
- 8 mm
- 8 mm
- 8 1/2
- 8 1/4
- 8 1/8
- 8 3/4
- 8 3/5
- 8 5/8
- 8 7/8
- 8×9
- 8.23
- 8.79
- 9
- 9 mm
- 9 mm
- 9/16
- 9/16 in
- 9/32
- 9/32 in
- 9/64
- 9.27
- 9.3
- 9.37
- 9.5
- 9.5 mm
- 9.52
- 9.9
- 10
- 10 mm
- 10 mm
- T10
- 10×11
- 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm
- 10.03
- 10.49
- 11
- 11 mm
- 11/16
- 11/16 in
- 11/32
- 11/32 in
- 11.12
- 11.17
- 11.3
- 12
- 12 mm
- 12 mm
- 12×14
- 12.7
- 12.7 mm
- 12.8
- 12.85
- 13
- 13 mm
- 13$14$10$8$12$7$5.5$5$6$4$11$4.5
- 13/16
- 13/16 in
- 13/32
- 13.20
- 13.6
- 14
- 14 mm
- 14.5 mm
- 14.6
- 14.71
- 15
- 15 mm
- T15
- 15/16
- 15/16 in
- 15.49
- 15.8
- 15.9
- 16
- 16 mm
- 16, 17 mm
- 16.5
- 16.64
- 17
- 17 mm
- 17/32
- 17/32 in
- 17.5
- 17.5 mm
- 18
- 18 mm
- 18, 19, 20, 21, 22, 23, 24 mm
- 18.1
- 18.3
- 18.41
- 19
- 19 mm
- 19/24
- 19/32
- 19/32 in
- 20
- 20 mm
- T20
- B20-24HD: 24, B20-27HD: 27
- 20.1
- 20.8
- 21
- 21 mm
- 21/32
- 21 to 50
- 21.5
- 22
- 22 mm
- 22.10
- 23
- 23 mm
- 24
- 24 mm
- 24,26
- 25
- 25 mm
- T25
- 25/32
- 25/32 in
- 25.4
- 25.4 mm
- 26
- 26 mm
- 27
- 27 mm
- T27
- 28
- 28 mm
- 29
- 29 mm
- 30
- 30 mm
- T30
- 31
- 31 mm
- 31/32
- 31.8
- 32
- 32 mm
- 33
- 33 mm
- 34
- 34 mm
- 35
- 35 mm
- 36
- 36 mm
- 37
- 37 mm
- 38
- 38 mm
- 38.1
- 38.1 mm
- 39
- 40
- 40 mm
- 41
- 41 mm
- 42
- 42 mm
- 43
- 44
- 44.5
- 45
- 46
- 46 mm
- 47
- 48
- 49
- BP49-17: 17, BP49-19: 19, BP49-21: 21
- 50
- 50 mm
- 51
- 52
- 53
- 54
- 54 mm
- 55
- 55 mm
- 56
- 57
- 58
- 58 mm
- 59
- 60
- 60 mm
- 61
- 62
- 63
- 63 mm
- 63.5
- 64
- 65
- 65 mm
- 66
- 67
- 67 mm
- 68
- 70
- 70 mm
- 71
- 71 mm
- 75
- 75 mm
- 77
- 77 mm
- 80
- 80 mm
- 83
- 85
- 85 mm
- 90
- 90 mm
- 95
- 95 mm
- 100
- 100 mm
- 100 mm
- 105
- 105 mm
- 110
- 110 mm
- 115
- 115 mm
- 120
- 120 mm
- 125
- 125 mm
- 130
- 130 mm
- 135
- 135 mm
- 140
- 140 mm
- 145
- 145 mm
- 150
- 150 mm
- 155
- 155 mm
- 160
- 160 mm
- 165
- 165 mm
- 170
- 170 mm
- 175
- 175 mm
- 180
- 185
- 190
- 200
- 210
- 215
- 225
- 235
-
Insertion Angle (Shaft measurement when electric drill) (Inch)
-
Overall length (L dimension)(mm)
- 1,000
- 9
- 10
- 13
- 14.0
- 14.5
- 15
- 15.5
- 16
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 21.7
- 22
- 22.5
- 23
- 23.5
- 24
- 25
- 25.3
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 29.9
- 30
- 30.5
- 30.8
- 31
- 31.5
- 31.8
- 31.9
- 32
- 32.5
- 33
- 33.1
- 33.5
- 33.6
- 34
- 34.1
- 34.5
- 34.6
- 35
- 35.1
- 35.5
- 36
- 36.5
- 37
- 37.5
- 38
- 38.2
- 38.5
- 39
- 39.1
- 39.5
- 40
- 40.1
- 40.5
- 41
- 41.5
- 41.7
- 42
- 42.5
- 42.7
- 43
- 43.5
- 44
- 44.9
- 45
- 46
- 46.1
- 46.5
- 47
- 47.5
- 48
- 48.5
- 48.8
- 49
- 49.5
- 50
- 50.1
- 50.5
- 50.8
- 51
- 51.3
- 51.5
- 52
- 52.3
- 53
- 53.5
- 54
- 54.5
- 54.7
- 54.9
- 55
- 55.5
- 56
- 56.5
- 57
- 58
- 58.5
- 59
- 59.5
- 60
- 60.5
- 60.6
- 61
- 61.5
- 62
- 62.4
- 63
- 64
- 64.5
- 65
- 66
- 66.5
- 67
- 67.5
- 68
- 68.5
- 69
- 69.5
- 70
- 71
- 72
- 73
- 73.3
- 73.5
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 83.5
- 84
- 85
- 85.5
- 86
- 87
- 87.5
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 96.5
- 97
- 98
- 100
- 101
- 101.5
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 115
- 116
- 117
- 118
- 120
- 121.5
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 130
- 132
- 133
- 135
- 136
- 137
- 138
- 139
- 140
- 140~190
- 142
- 143
- 144.0
- 145
- 146
- 147
- 150
- 152
- 155
- 158
- 160
- 160～220
- 161
- 163
- 165
- 167
- 168
- 169
- 170
- 173
- 175
- 176
- 178
- 179
- 180
- 181
- 182
- 183
- 185
- 186
- 190
- 191
- 192
- 194
- 195
- 196
- 198
- 199
- 200
- 202
- 204
- 205
- 207
- 208
- 210
- 211
- 212
- 213
- 214
- 215
- 216
- 218
- 220
- 221
- 224
- 225
- 226
- 227
- 228
- 230
- 230.5
- 231
- 232
- 234
- 235
- 236
- 237
- 238
- 239
- 240
- 242
- 243
- 245
- 247
- 248
- 250
- 251
- 252
- 253
- 254
- 254.5
- 255
- 255.5
- 256
- 257
- 258
- 260
- 262
- 264
- 265
- 267
- 268
- 270
- 275
- 276
- 277
- 280
- 283
- 285
- 290
- 298
- 300
- 303
- 304
- 305
- 306
- 307
- 308
- 310
- 312.5
- 315
- 320
- 322
- 328
- 330
- 331
- 336
- 350
- 351
- 360
- 365
- 370
- 375
- 380
- 395
- 396
- 400
- 402
- 413
- 415
- 423
- 430
- 445
- 446
- 450
- 453
- 472
- 478
- 500
- 505
- 508
- 530
- 550
- 565
- 575
- 580
- 600
- 620
- 650
- 654
- 660
- 698
- 700
- 701
- 711
- 720
- 787
- 800
- 824
- 900
- 990
- 1000
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- KO-KEN TOOL (141)
- TONE (97)
- KTC(KYOTO TOOL) (47)
- NAGAHORI INDUSTRY (45)
- MITOLOY (29)
- TOP (19)
- HAZET (7)
- ASAHI METAL INDUSTRY (6)
- TRUSCO NAKAYAMA (6)
- ENGINEER (5)
- HOZAN (4)
- SK 11 (3)
- LOBTEX (2)
- NEPROS (2)
- SUPER TOOL (2)
- ANEX (1)
- E VALUE (1)
- SIGNET (1)
- TOHNICHI MFG (1)
- WERA (1)
- ARC GREATTOOL (0)
- ASTRO PRODUCTS (0)
- VESSEL (0)
- Stahlwille (0)
- WIHA (0)
- ATI (0)
- WILLIAMS (0)
- SMATO (0)
- SUEKAGE TOOL (0)
- ESCO (0)
- FPC (0)
CAD
-
- 2D
- 3D
Related Categories to Socket Wrenches
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Chisels
- Screwdriver Bits
- Pullers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Insulation Tools
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy