(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
MISUMI Square HSS End Mills（Tool Material Type：Cobalt HSS）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model
MISUMI
[Features]
·High-speed steel uncoated square regular blade length 2-flute type with up to ø50
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 2 Flutes
- R (Regular)
Standard Price: MYR 58.38- Days to Ship: 2 Day(s) or more -
High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model
MISUMI
[Features]
·High-speed steel uncoated square short flute length 2-flute type with up to ø50
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 2 Flutes
- S (Short)
Standard Price: MYR 41.48- Days to Ship: 1 Day(s) or more -
High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model
MISUMI
[Features]
·Uncoated 4-flute regular blade length type
·Effective for side milling with 40° helix angle, which is stronger than standard helix angle
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Standard Price: MYR 71.63- Days to Ship: 4 Day(s) or more -
High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model
MISUMI
[Features]
·Uncoated 4-flute short blade length type
·Effective for side milling with 40° helix angle, which is stronger than standard helix angle
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Standard Price: MYR 61.52- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]
·High-speed steel roughing end mill that achieves both machining performance and price
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- S (Short)
Standard Price: MYR 134.01- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut
MISUMI
[Features]
·High-speed steel roughing end mill that achieves both machining performance and price
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Standard Price: MYR 167.65- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut
MISUMI
[Features]
·High-speed steel roughing end mill that achieves both machining performance and price
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- L (Long)
Standard Price: MYR 201.86- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
MISUMI
[Features]
·High-speed steel roughing end mill that achieves both machining performance and price
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 3 Flutes
- S (Short)
Standard Price: MYR 200.76- Days to Ship: 4 Day(s) or more -
High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model
MISUMI
[Features]
·High-speed steel roughing uncoated short flute length type with optimum pitch width for coarse finishing
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Standard Price: MYR 100.57- Days to Ship: 4 Day(s) or more -
High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model
MISUMI
[Features]
·High-speed steel roughing uncoated regular flute length type with optimum pitch width for coarse finishing
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Standard Price: MYR 135.55- Days to Ship: 4 Day(s) or more -
High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model
MISUMI
[Features]
·High-speed steel roughing uncoated long flute length type with optimum pitch width for coarse finishing
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Standard Price: MYR 165.49- Days to Ship: 4 Day(s) or more -
High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model
MISUMI
[Features]
·High-speed steel roughing uncoated long shank type with pitch width ideal for coarse finishing
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 3 Flutes
- S (Short)
Standard Price: MYR 168.11- Days to Ship: 4 Day(s) or more -
TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]
·High-speed steel roughing short flute length type with standard TiAlN coating
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiAlN
- S (Short)
Standard Price: MYR 123.64- Days to Ship: 2 Day(s) or more -
AS Coated High-Speed Steel Square End Mill, 2-Flute, Short
MISUMI
[Features]
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 2 Flutes
- S (Short)
Standard Price: MYR 93.93- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Square End Mill, 2-Flute / Regular
MISUMI
[Features]
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 2 Flutes
- R (Regular)
Standard Price: MYR 96.44- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Square End Mill, 2-Flute / Long
MISUMI
[Features]
·Suitable for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 2 Flutes
- L (Long)
Standard Price: MYR 103.79- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Square End Mill, 4-Flute / Short
MISUMI
[Features]
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- S (Short)
Standard Price: MYR 99.76- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Square End Mill, 4-Flute / Regular
MISUMI
[Features]
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Standard Price: MYR 108.34- Days to Ship: 4 Day(s) or more -
AS Coated High-Speed Steel Square End Mill, 4-Flute / Long
MISUMI
[Features]
·Suitable for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- L (Long)
Standard Price: MYR 116.82- Days to Ship: 4 Day(s) or more -
High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model
MISUMI
[Features]
·High-speed steel uncoated square long flute length 2-flute type with up to ø50
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 2 Flutes
- L (Long)
Standard Price: MYR 66.54- Days to Ship: 4 Day(s) or more -
High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model
MISUMI
[Features]
·Uncoated 4-flute long flute length type
·Effective for side milling with 40° helix angle, which is stronger than standard helix angle
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Standard Price: MYR 80.49- Days to Ship: 4 Day(s) or more -
High-Speed Steel Corner C End Mill, 2-Flute / Short Model
MISUMI
[Features]
·High-speed steel 2-flute corner chamfer specified end mill with selectable corner chamfer in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 6 Day(s) or more -
High-Speed Steel Corner C End Mill, 2-Flute / Regular Model
MISUMI
[Features]
·High-speed steel 2-flute corner chamfer specified end mill with selectable corner chamfer in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 6 Day(s) or more -
High-Speed Steel Corner C End Mill, 4-Flute / Short Model
MISUMI
[Features]
·High-speed steel 4-flute corner chamfer specified end mill with selectable corner chamfer in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 6 Day(s) or more -
High-Speed Steel Corner C End Mill, 4-Flute / Regular Model
MISUMI
[Features]
·High-speed steel 4-flute corner chamfer specified end mill with selectable corner chamfer in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 6 Day(s) or more -
High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model
MISUMI
[Features]
·High-speed steel 2-flute relief shape end mill that can custom dimensions to avoid unwanted tool interference- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 6 Day(s) or more -
High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model
MISUMI
[Features]
·High-speed steel 2-flute relief shape end mill that can custom dimensions to avoid unwanted tool interference- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 6 Day(s) or more -
High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model
MISUMI
[Features]
·High-speed steel 4-flute relief shape end mill that can custom dimensions to avoid unwanted tool interference- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 6 Day(s) or more -
High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model
MISUMI
[Features]
·High-speed steel 4-flute relief shape end mill that can custom dimensions to avoid unwanted tool interference- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 6 Day(s) or more -
High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short
MISUMI
[Features]
·High-speed steel 2-flute square end mill short flute length type that allows cutting diameter to be specified in 0.01 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 6 Day(s) or more -
High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular
MISUMI
[Features]
·High-speed steel 2-flute square end mill regular flute length type that allows cutting diameter to be specified in 0.01 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 6 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Machining Application |
| Coating |
| Blade shape type |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Tool Material Type |
| Underneck length (ℓ1)(mm) |
| shank |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model | High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model | AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut | High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model | High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model | High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model | High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model | TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut | AS Coated High-Speed Steel Square End Mill, 2-Flute / Regular | AS Coated High-Speed Steel Square End Mill, 4-Flute / Regular | High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model | High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model | High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model | High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model | High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model | High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short | High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular | ||||||||
| Days to Ship | 2 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Blade diameter (D)(φ) | 1 ～ 25 | 1 ～ 50 | 3 ～ 30 | 3 ～ 40 | 5 ～ 50 | 6 ～ 50 | 10 ～ 50 | 6 ～ 30 | 5 ～ 50 | 6 ～ 50 | 10 ～ 50 | 6 ～ 30 | 5 ～ 30 | 1 ～ 50 | 1 ～ 25 | 3 ～ 40 | 3 ～ 38 | 3 ～ 30 | 3 ～ 40 | 3 ～ 40 | 3 ～ 40 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 8 ～ 25 | 8 ～ 25 | 8 ～ 25 | 8 ～ 25 | 2.7 ～ 25 | 2.7 ～ 24.99 |
| Blade length (ℓ)(mm) | 3.5 ～ 60 | 2.5 ～ 75 | 12 ～ 68 | 8 ～ 65 | 13 ～ 75 | 19 ～ 112 | 45 ～ 150 | 11 ～ 45 | 13 ～ 75 | 19 ～ 112 | 45 ～ 150 | 11 ～ 45 | 13 ～ 45 | 2.5 ～ 75 | 3.5 ～ 60 | 15 ～ 110 | 8 ～ 65 | 12 ～ 68 | 15 ～ 110 | 15 ～ 110 | 15 ～ 110 | 8 ～ 50 | 10 ～ 60 | 8 ～ 45 | 12 ～ 68 | - | - | - | - | 8 ～ 50 | 10 ～ 60 |
| Shank diameter (d)(mm) | 6 ～ 25 | 6 ～ 42 | 6 ～ 25 | 6 ～ 32 | 6 ～ 42 | 6 ～ 42 | 10 ～ 42 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 10 ～ 42 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 6 ～ 25 | 6 ～ 25 |
| Number of flutes(sheet) | 2 | 2 | 4 | 4 | 3 ～ 6 | 3 ～ 6 | 4 ～ 6 | 3 ～ 4 | 3 ～ 6 | 3 ～ 6 | 4 ～ 6 | 3 ～ 4 | 3 ～ 6 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 4 | 2 | 2 | 4 | 4 | 2 | 2 | 4 | 4 | 2 | 2 |
| Overall Length (L)(mm) | 45 ～ 130 | 45 ～ 165 | 55 ～ 144 | 52 ～ 150 | 57 ～ 177 | 63 ～ 214 | 95 ～ 252 | 80 ～ 160 | 57 ～ 177 | 63 ～ 214 | 95 ～ 252 | 80 ～ 160 | 57 ～ 121 | 45 ～ 165 | 45 ～ 130 | 60 ～ 195 | 52 ～ 150 | 55 ～ 144 | 60 ～ 195 | 60 ～ 195 | 60 ～ 195 | 50 ～ 120 | 50 ～ 130 | 52 ～ 121 | 55 ～ 144 | 60 ～ 120 | 60 ～ 130 | 69 ～ 121 | 78 ～ 144 | 50 ～ 120 | 50 ～ 130 |
| work material | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Machining Application | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking |
| Coating | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated |
| Blade shape type | Square | Square | Square | Square | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Base Blade Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Tool Material Type | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| shank | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1/2
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
-
-
Blade length (ℓ)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Machining Application
-
Coating
-
Blade shape type
- Square
- Roughing
- For Keyway
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Tool Material Type
-
Underneck length (ℓ1)(mm)
-
shank
Narrow search by specifying Manufacturer
-
- MISUMI (31)
- OSG (47)
- SANKO MFG (35)
- NACHI(FUJIKOSHI) (29)
- EIKOSHA (3)
- FUKUDA (0)
- DAIICHITOOL (0)
- TAIYO-TOOL (0)
- ASAHI TOOLS (0)
- ESCO (0)
CAD
-
- 2D
- 3D
Related Categories to Square HSS End Mills
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy