(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
MISUMI Linear Shafts（Material：Steel）
Basic Shape
-
Solid -
One End Stepped -
Both Ends Stepped -
Hollow -
Hollow, One End Stepped -
Hollow, Both Ends Stepped
-
MISUMI
[Features] Straight type shaft (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.
Days to Ship: 3 Day(s) or more -
Linear Shafts-Both Ends Tapped
MISUMI
[Features] A shaft with female threads on both ends (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.
Days to Ship: 3 Day(s) or more -
Days to Ship: 7 Day(s) or more -
Days to Ship: 7 Day(s) or more -
MISUMI
[Features]One end female thread type shaft (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.
Days to Ship: 3 Day(s) or more -
Linear Shafts-Both Ends Tapped with Wrench Flats / Both Ends Tapped with Cross-Drilled Hole
MISUMI
[Features] A shaft (linear shaft, hardened shaft, guide shaft, slide shaft) with female screw holes on both ends and a spanner groove. L size standard expanded! You can now purchase from an even more complete lineup.
Days to Ship: 5 Day(s) or more -
Days to Ship: 7 Day(s) or more -
Linear Shafts - Shaft Ends Configurable
MISUMI
Combination of both ends' shapes unavailable for standard products becomes available.
Days to Ship: 6 Day(s) or more -
Days to Ship: 7 Day(s) or more -
MISUMI
"[Features] This shaft facilitates customers to arrange wiring, because the wire can be pierced into the inside of the shaft and contributes to weight saving of equipment, because the shaft is hollow."
Days to Ship: 3 Day(s) or more -
Linear Shafts-One End Tapped with Wrench Flats / Cross-Drilled Hole
MISUMI
[Features] A shaft (linear shaft, hardened shaft, guide shaft, slide shaft) with a female screw hole on one end and a spanner groove. L size standard expanded! You can now purchase from an even more complete lineup.
Days to Ship: 4 Day(s) or more -
Days to Ship: 7 Day(s) -
Linear Shafts-One Ends Threaded
MISUMI
[Features] Direct-acting shafts (linear shafts, hardened shafts, guide shafts, slide shafts) are male threaded on one end, female threaded on one end with a drilled hole, and have a spanner groove.
Days to Ship: 6 Day(s) or more -
Days to Ship: 7 Day(s) -
Precision Linear Shafts - Fully Plated Straight Type
MISUMI
[Features] Surface treatment is also applied to shaft ends.
Days to Ship: 4 Day(s) or more -
![[Clean & Pack] Shaft - Straight](//content.misumi-ec.com/image/upload/t_product_view_b/t_misumi_wm/v1/p/jp/product/series/110310639269/110310639269_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack] Shaft - Straight
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.Days to Ship: 8 Day(s) or more -
Linear Shafts-Both Ends Threaded
MISUMI
[Features]A shaft with male threads on both ends (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.
Days to Ship: 3 Day(s) or more -
Linear Shafts - With Retaining Ring Grooves -
MISUMI
[Features] Direct-drive shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with retaining ring grooves.
Days to Ship: 3 Day(s) or more -
Linear Shafts-Both Ends Stepped and Female Thread-
MISUMI
[Features] A stepped female thread on both ends/a stepped shaft on both ends (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.
Days to Ship: 3 Day(s) or more -
High Precision Linear Shafts-Both Ends Tapped / Both Ends Tapped with Wrench Flats
MISUMI
"[Features] Have a high accuracy in perpendicularity of shaft ends (0.03) and thus, are suitable for performing parts assembly that requires high accuracy."
Days to Ship: 7 Day(s) or more -
Linear Shafts-Both Ends Stepped and Female Thread with Wrench Flats-
MISUMI
[Features] A type of shaft (linear shaft, hardened shaft, guide shaft, slide shaft) with a stepped internal screw spanner groove on both ends. L size standard expanded! You can now purchase from an even more complete lineup.
Days to Ship: 6 Day(s) or more -
MISUMI
[Features] One end male thread, one end female thread, relief groove, spanner groove/drilled hole type shaft (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.
Days to Ship: 6 Day(s) or more -
Linear Shafts-One End Stepped and Female Thread-
MISUMI
[Features] One end stepped female thread/one end stepped type shaft (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.
Days to Ship: 3 Day(s) or more -
Linear Shafts-One End Threaded
MISUMI
[Features]A shaft with a male thread on one end (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.
Days to Ship: 3 Day(s) or more -
Linear Shafts - One End Stepped Hollow
MISUMI
"[Features] This shaft facilitates customers to arrange wiring, because the wire can be pierced into the inside of the shaft and contributes to weight saving of equipment, because the shaft is hollow."
Days to Ship: 3 Day(s) or more -
MISUMI
[Features] Direct drive shafts (linear shafts, hardened shafts, guide shafts, slide shafts) are keyed type.
Days to Ship: 3 Day(s) or more -
Linear Shafts-One End Stepped, Both Ends Female Thread-
MISUMI
[Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with one end stepped and both ends female threaded/one end stepped and one end female threaded. L size standard expanded! You can now purchase from an even more complete lineup.
Days to Ship: 3 Day(s) or more -
Linear Shafts-One End Threaded One End Tapped
MISUMI
[Features]A shaft (linear shaft, hardened shaft, guide shaft, slide shaft) with one end male thread and one end female thread. L size standard expanded! You can now purchase from an even more complete lineup.
Days to Ship: 3 Day(s) or more -
Shafts - One End Tapered, One End Tapped / One End Stepped and Tapped / One End Threaded
MISUMI
[Features] Direct drive shafts (linear shafts, hardened shafts, guide shafts, slide shafts) have one end taper, one end female thread, one end stepped female thread, and one end male thread type.
Days to Ship: 6 Day(s) or more -
Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded
MISUMI
[Features]A shaft with a stepped male thread on one end (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.
Days to Ship: 6 Day(s) or more -
Linear Shafts - Set Screw Grooved
MISUMI
[Features] Linear shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with grooves for set screws.
Days to Ship: 8 Day(s) or more -
Shafts - Hollow /One End Tapped Hollow with Wrench Flat
MISUMI
"[Features] This shaft facilitates customers to arrange wiring, because the wire can be pierced into the inside of the shaft and contributes to weight saving of equipment, because the shaft is hollow."
Days to Ship: 3 Day(s) or more -
Linear Shafts-One End Stepped, Both Ends Female Thread with Wrench Flats-
MISUMI
[Specification expansion] In response to many requests, a new spanner grooved type with a stepped end and a female thread on one end is now available!
Days to Ship: 6 Day(s) or more -
Linear Shafts One End Threaded with Undercut
MISUMI
[Features] A shaft (linear shaft, hardened shaft, guide shaft, slide shaft) with a male screw relief groove on one end. L size standard expanded! You can now purchase from an even more complete lineup.
Days to Ship: 6 Day(s) or more -
Days to Ship: 7 Day(s) -
MISUMI
"[Features] This shaft facilitates customers to arrange wiring, because the wire can be pierced into the inside of the shaft and contributes to weight saving of equipment, because the shaft is hollow."
Days to Ship: 3 Day(s) or more -
Days to Ship: 7 Day(s) -
MISUMI
"[Features] Have a high accuracy in perpendicularity of shaft ends (0.03) and thus, are suitable for performing parts assembly that requires high accuracy."
Days to Ship: 6 Day(s) or more -
![[Clean & Pack] Shaft - Both Ends Threaded with Undercut](//content.misumi-ec.com/image/upload/t_product_view_b/t_misumi_wm/v1/p/jp/product/series/110310639179/110310639179_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack] Shaft - Both Ends Threaded with Undercut
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.Days to Ship: 9 Day(s) or more -
Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut
MISUMI
[Features] One end male thread, one end female thread, shaft with relief groove (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.
Days to Ship: 6 Day(s) or more -
Days to Ship: 7 Day(s) -
High Precision Linear Shafts-One End Tapped / One End Tapped with Wrench Flats
MISUMI
"[Features] Have a high accuracy in perpendicularity of shaft ends (0.03) and thus, are suitable for performing parts assembly that requires high accuracy."
Days to Ship: 7 Day(s) or more -
MISUMI
[Features] Direct-acting shafts (linear shafts, hardened shafts, guide shafts, slide shafts) are female threaded 2-hole types.
Days to Ship: 3 Day(s) or more -
MISUMI
"[Features] This shaft facilitates customers to arrange wiring, because the wire can be pierced into the inside of the shaft and contributes to weight saving of equipment, because the shaft is hollow."
Days to Ship: 6 Day(s) or more -
Full Length Hardness Guaranteed Shafts - One End / Both Ends Tapped, Short
MISUMI
[Features] The entire length hardness guaranteed shaft does not decrease in hardness, so it can be used for sliding with short strokes.
Days to Ship: 6 Day(s) or more
![[Clean & Pack] Shaft - Straight](http://content.misumi-ec.com/image/upload/t_product_view_b/t_misumi_wm/v1/p/jp/product/series/110310639269/110310639269_001_20230911105917.jpg?$product_view_b$)
![[Clean & Pack] Shaft - Both Ends Threaded with Undercut](http://content.misumi-ec.com/image/upload/t_product_view_b/t_misumi_wm/v1/p/jp/product/series/110310639179/110310639179_001_20230911105917.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Environmentally friendly |
| Basic Shape |
| Characteristics/Applications |
| End Shape (Left) |
| End Shape (Right) |
| Clamping Tool Type |
| Shaft End Perpendicularity |
| Material |
| Heat Treatment |
| Surface Treatment |
| Shaft Dia. D(Ø) |
| Material Details |
| Shaft Fits |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Linear Shafts-Both Ends Tapped with Wrench Flats / Both Ends Tapped with Cross-Drilled Hole | Linear Shafts-One End Tapped with Wrench Flats / Cross-Drilled Hole | High Precision Linear Shafts-Both Ends Tapped / Both Ends Tapped with Wrench Flats | Linear Shafts-Both Ends Stepped and Female Thread with Wrench Flats- | Shafts - One End Tapered, One End Tapped / One End Stepped and Tapped / One End Threaded | Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded | Linear Shafts-One End Stepped, Both Ends Female Thread with Wrench Flats- | Linear Shafts One End Threaded, Thread Size Equal To Shaft Dia | Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut | Linear Shafts One End Stepped, Both Ends Tapped/One End Tapped | High Precision Linear Shafts-One End Tapped / One End Tapped with Wrench Flats | Full Length Hardness Guaranteed Shafts - One End / Both Ends Tapped, Short | |||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 3 Day(s) or more | 3 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 3 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 7 Day(s) | 6 Day(s) or more | 7 Day(s) | 4 Day(s) or more | 8 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 3 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) | 3 Day(s) or more | 7 Day(s) | 6 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 7 Day(s) | 7 Day(s) or more | 3 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||
| Environmentally friendly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Basic Shape | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid / One End Stepped / Both Ends Stepped | Solid | Hollow | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Both Ends Stepped | Solid | Both Ends Stepped | Solid | One End Stepped | Solid | Hollow, One End Stepped | Solid | One End Stepped | Solid | Solid / One End Stepped | One End Stepped / Both Ends Stepped | Solid | Hollow | One End Stepped | Solid / One End Stepped | Solid | Hollow | Solid | Solid | Solid | Solid | One End Stepped | Solid | Solid | Hollow | Solid |
| Characteristics/Applications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| End Shape (Left) | No Machining | Tapped | Tapped | No Machining | Tapped | Tapped | Tapped | No Machining / Tapped / Threaded / With Retaining Ring Grooves / Tapped / Hex Socket / Tapered | Tapped | No Machining | Tapped | With Retaining Ring Grooves | Threaded | Threaded | No Machining / Tapped / Threaded | No Machining | Threaded | With Retaining Ring Grooves | No Machining / Tapped | Tapped | Tapped | Threaded | No Machining / Tapped | Threaded | No Machining | Keyway | No Machining / Tapped | Threaded | Tapered | Threaded | No Machining / Tapped / Threaded / Set Screw Grooved | Tapped | Tapped | Threaded | Threaded | Tapped | Threaded | Threaded | Threaded | Threaded | No Machining / Tapped | Tapped | No Machining / Tapped / Threaded | Threaded | Tapped |
| End Shape (Right) | No Machining | Tapped | Tapped | No Machining | No Machining | Tapped | Tapped | No Machining / Tapped / Threaded / With Retaining Ring Grooves / Tapped Hole / Hex Socket / Tapered | No Machining | No Machining | No Machining | With Retaining Ring Grooves | Tapped | Tapped | No Machining / Tapped / Threaded / Tapered | No Machining | Threaded | With Retaining Ring Grooves | No Machining / Tapped | Tapped | Tapped | Tapped | No Machining | No Machining | No Machining | No Machining | Tapped | Tapped | Tapped / Threaded | No Machining / Threaded | Set Screw Grooved | No Machining | Tapped | No Machining | No Machining | Tapped | No Machining | Tapped | Threaded | Tapped | Tapped | No Machining | Tapped Hole | No Machining | No Machining / Tapped |
| Clamping Tool Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft End Perpendicularity | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | - | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.03) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | - | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | - | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | - | Perpendicularity (0.2) | Perpendicularity (0.03) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.2) | Perpendicularity (0.03) | Perpendicularity (0.2) | - | Perpendicularity (0.2) |
| Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Heat Treatment | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Induction Hardened | Not Provided / Induction Hardened | Induction Hardened | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Induction Hardened | Not Provided | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Induction Hardened | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Induction Hardened | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Induction Hardened | Not Provided / Induction Hardened | Induction Hardened | Induction Hardened | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Induction Hardened | Not Provided / Induction Hardened | Induction Hardened | Not Provided | Not Provided / Induction Hardened | Not Provided / Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened |
| Surface Treatment | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating | Electroless Nickel Plating | Hard Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Hard Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating | Not Provided / Low Temperature Black Chrome Plating |
| Shaft Dia. D(Ø) | 3 ～ 50 | 4 ～ 50 | 4 ～ 50 | 3 ～ 50 | 4 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 50 | 4 ～ 50 | 6 ～ 50 | 6 ～ 50 | 3 ～ 30 | 6 ～ 50 | 4 ～ 30 | 8 ～ 50 | 6 ～ 50 | 4 ～ 50 | 3 ～ 30 | 8 ～ 50 | 4 ～ 30 | 8 ～ 50 | 8 ～ 50 | 8 ～ 50 | 4 ～ 50 | 6 ～ 50 | 6 ～ 50 | 8 ～ 50 | 4 ～ 50 | 6 ～ 20 | 8 ～ 50 | 6 ～ 30 | 6 ～ 50 | 8 ～ 50 | 8 ～ 50 | 3 ～ 30 | 6 ～ 50 | 4 ～ 30 | 5 ～ 30 | 8 ～ 50 | 8 ～ 50 | 8 ～ 30 | 4 ～ 30 | 15 ～ 50 | 6 ～ 40 | 6 ～ 20 |
| Material Details | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft Fits | h5 ～ f8 | h5 ～ f8 | g7 ～ f8 | g7 ～ f8 | h5 ～ f8 | h5 ～ f8 | g7 ～ f8 | h5 ～ g6 | g7 ～ f8 | g6 | h5 ～ f8 | g7 ～ f8 | h5 ～ f8 | g7 ～ f8 | g6 | f8 | h5 ～ f8 | h5 ～ f8 | h5 ～ f8 | g6 | h5 ～ f8 | h5 ～ f8 | h5 ～ f8 | h5 ～ f8 | g6 | h5 ～ f8 | h5 ～ f8 | h5 ～ f8 | h5 ～ g6 | h5 ～ f8 | g6 | g6 | h5 ～ f8 | h5 ～ f8 | g7 ～ f8 | g6 | g7 ～ f8 | g6 | f8 | h5 ～ f8 | g7 ～ f8 | g6 | g6 | g6 | g6 |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Degreasing / Precision Cleaning | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Degreasing / Precision Cleaning | - | - | - | - | - | - |
![[Clean & Pack] Shaft - Straight](http://content.misumi-ec.com/image/upload/t_product_view_c/t_misumi_wm/v1/p/jp/product/series/110310639269/110310639269_001_20230911105917.jpg?$product_view_c$)
![[Clean & Pack] Shaft - Both Ends Threaded with Undercut](http://content.misumi-ec.com/image/upload/t_product_view_c/t_misumi_wm/v1/p/jp/product/series/110310639179/110310639179_001_20230911105917.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Environmentally friendly
-
Characteristics/Applications
-
End Shape (Left)
-
No Machining -
Tapped -
Threaded -
Set Screw Grooved -
With Retaining Ring Grooves -
Keyway -
Tapped -
Hex Socket -
Tapered
-
-
End Shape (Right)
-
No Machining -
Tapped -
Threaded -
Set Screw Grooved -
With Retaining Ring Grooves -
Tapped Hole -
Hex Socket -
Tapered -
Tapped Pilot
-
-
Clamping Tool Type
- Not Provided
-
Shaft End Perpendicularity
- Perpendicularity (0.2)
- Perpendicularity (0.03)
-
Material
- SUJ2
- S45C
- Steel
- Stainless Steel
-
Heat Treatment
- Not Provided
- Induction Hardened
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
- Electroless Nickel Plating
-
Shaft Dia. D(Ø)
-
Material Details
- SUS304
-
Shaft Fits
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
- 12 Day(s) or Less
Related Categories to Linear Shafts
-
- Linear Shafts
- Shaft Supports
- Shaft Collars
- Linear Bushings
- Ball Guides
- Spline Shaft
- Oil Free Bushings, Washers
- Linear Motor Actuators
- Oil Free Plates, Guide Rails
- Linear Guides
- Cable Carriers
- Ball Screw
- Support Units
- Lead Screws, Slide Screws
- Cross Roller
- Slide Packs, V Guides, Linear Rails
- Actuators/Single Axis Robot
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy