(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Contact Switches
| Days to Ship |
|
|---|
-
MISUMI
This is a positioning switch, bolt type, long stroke.
- Volume Discount
Standard Price: MYR 226.94- Days to Ship: 4 Day(s) or more -
Ball Plunger BP With Ultra Compact Switch
METROL
[Features]
· A ultra small type of ø4 is also provided.
· World's smallest. Ball plunger switch- CAD ：
- 2D
Standard Price: MYR 240.21- Days to Ship: 1 Day(s) or more -
CS-Touch Switch CS/CSJ/CSS/CSK/CSP
METROL
[Features]
· Parallel use slim design with abundant variation
· M5 to /long stroke waterproof- CAD ：
- 2D
Standard Price: MYR 160.53- Days to Ship: 1 Day(s) or more -
High-Precision, MT-Touch Switch, P11
METROL
[Features]
Since the fine adjustment mechanism for mounting and signal settings does not exist, it is used for detecting the origin of the moving or displaced object.
· The tool setter of NC machine is set parallel at 0.01 mm degrees to the connector. (it can be used or thermal displacement correction)
.- CAD ：
- 2D
Standard Price: MYR 559.37- Days to Ship: 4 Day(s) or more -
Contact Switches-Non Contact Point Type Bolt Type
MISUMI
Pin stroke type non-contact positioning switch with a threaded main body. Detection with low contact force is enabled.
- Volume Discount
Standard Price: MYR 92.41- Days to Ship: 2 Day(s) or more -
Contact Switches/Bolt/L-Shaped Bolt Switches
MISUMI
[Features]·Pin stroke type positioning switch with a threaded main body.
- Volume Discount
Standard Price: MYR 169.41- Days to Ship: 1 Day(s) or more -
METROL
[Features]
1 unit dual roles. The stopper bolt has an in-built positioning switch.
· Reduction in the number of parts and design man-hour. Ensures miniaturization of the machinery
· Since the parts of th switch are cartridge type, the maintenance cost can be reduced drastically.
· Anybody can replace the switch easily.
· Eliminates the need for repairs.
· No damage is caused to the switch even if the chord gets twisted or pulled while fixing the switch into the machine and the operation can be performed easily.
· Improves the efficiency of the machine MTTR and the time required for "repairs" (for example: short-period stop) also reduces drastically.- CAD ：
- 2D
Standard Price: MYR 139.29- Days to Ship: 2 Day(s) or more -
Contact Switches/Spring Plunger/IP40
MISUMI
This is a positioning switch ,spring plunger type. [Main Body Material]SUS303 [Pin Part Material] SUS440C
- Volume Discount
Standard Price: MYR 149.28- Days to Ship: 2 Day(s) or more -
METROL
[Features]
· 1 unit dual roles. The ball plunger has an in- built touch switch.
· Index for rotating body, indexing using the notch of the sliding conductor. The positioning function and confirmation signal are given as output.
· Reduction in the number of parts and design man-hour. Ensures miniaturization of the machinery.- CAD ：
- 2D
Standard Price: MYR 138.78- Days to Ship: 1 Day(s) or more -
Heat Resistant Switch HT Series
METROL
[Features]
The maximum temperature for continuous operation lies at 150°C/200°C
Plastic parts that are heat-resistant, adhesives for high temperature and heat-resistant chord have been used.- CAD ：
- 2D
Standard Price: MYR 720.64- Days to Ship: 4 Day(s) or more -
MISUMI
This is a positioning switch, cylindrical type. [Main Body Shape]Cylindrical type
- Volume Discount
Standard Price: MYR 167.78- Days to Ship: 1 Day(s) or more -
Contact Switches with Stoppers/Screw/IP44
MISUMI
This is a positioning switch with a stopper, mini drip-proof type, threaded type.
- Volume Discount
Standard Price: MYR 135.31- Days to Ship: 1 Day(s) or more -
Contact Switches with Stoppers/Cylinder/IP44
MISUMI
This is a positioning switch with a stopper, mini drip-proof type, cylindrical type.
- Volume Discount
Standard Price: MYR 114.00- Days to Ship: 2 Day(s) or more -
Non Contact Point Positioning Switches Flat Type
MISUMI
This is a non-contact type positioning switch, flat type. [Main Body Material]Zinc alloy
- Volume Discount
Standard Price: MYR 126.51- Days to Ship: 2 Day(s) -
![Smart Contact Sensor (Distinction Type) [E9NC-T]](//pre-my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/e9nc-t.jpg?$product_view_b$)
Smart Contact Sensor (Distinction Type) [E9NC-T]
OMRON
Accessories of "E9NC-T" sensor having a sliding frequency that exceeds 60 million, that results in long life and durability.
[Features]
· SN-F type (flat-bottomed shape). In order to increase the strength of the primer block, the base is flattened by eliminating the bolt meant for mounting- CAD ：
- 3D
Standard Price: MYR 278.26- Days to Ship: 5 Day(s) or more -
Ultra Small Size High-Precision PT-Touch Switch PT
METROL
[Features]
M5 or ø5, smallest size is 17 mm
· The accuracy of repetition of the operating point can be between 1μm/3μm (range)- CAD ：
- 2D
Standard Price: MYR 240.21- Days to Ship: 2 Day(s) or more -
CS-Touch Switch for Declination Waterproof Type CSHP
METROL
[Features]
· M8 ultra-fine. Positioning at the deflected angle with waterproof specifications.- CAD ：
- 2D
Standard Price: MYR 469.75- Days to Ship: 4 Day(s) or more -
High-Precision, MT-Touch Switch, P10DH
METROL
[Features]
A direct acting type ball bearing is used in the bearing which is applicable for sliding, deflection and off-set.Standard Price: MYR 1,072.73- Days to Ship: 4 Day(s) or more -
Contact Switches/L-Shaped Cylinder Type With LED
MISUMI
This is a positioning switch, cylindrical type L-shaped. [Main Body Material]SUS303
- Volume Discount
Standard Price: MYR 220.02 Days to Ship: 4 Day(s) or more -
Contact Switches/L-Shaped Bolt Type With LED
MISUMI
[Contact Part Type]Needle type [Main Body Material] SUS303 [Contact Part Material] SUS420
- Volume Discount
Standard Price: MYR 233.57 Days to Ship: 2 Day(s) -
Contact Switches/Tip Shape Selectable Type
MISUMI
[Features]·This is a positioning switch with the selectable tip shape. [Material]·It is made of SUS303.
- Volume Discount
Standard Price: MYR 226.35- Days to Ship: 1 Day(s) or more -
Contact Switches/Wide Contact Angle Type
MISUMI
Ball bearings allow contact from all directions
- Volume Discount
Standard Price: MYR 289.18 Days to Ship: 2 Day(s) -
Contact Switches/With Resin Tip
MISUMI
[Features]·Suitable for presence/absence detection when you do not want to damage the workpiece.
- Volume Discount
Standard Price: MYR 227.48- Days to Ship: 1 Day(s) or more -
Contact Switches/Water Resisting/End Shape Selection
MISUMI
This is a positioning switch, waterproof type. [Main Body Material]SUS303
- Volume Discount
Standard Price: MYR 271.55 Days to Ship: 4 Day(s) or more -
High Precision Contact Switches/Bolt Type
MISUMI
[Features]·It supports high-precision positioning with a repeatability of 0.5 µm.
- Volume Discount
Standard Price: MYR 442.84- Days to Ship: 2 Day(s) or more -
High Precision Touch Switches Tip Shape Selectable Type
MISUMI
This is a high-precision positioning switch, tip shape selection type. [Material]SUS303.
- Volume Discount
Standard Price: MYR 475.30- Days to Ship: 4 Day(s) or more -
Contact Switches with Stoppers/Screw with Flange/IP44
MISUMI
[Features]·This is a pin stroke type, spring plunger type, with a stopper.
- Volume Discount
Standard Price: MYR 129.27- Days to Ship: 2 Day(s) or more -
Contact Switches with Stoppers/Cylinder with Flange/IP44
MISUMI
[Features]·This is a pin stroke type, spring plunger type, with a stopper.
- Volume Discount
Standard Price: MYR 128.86- Days to Ship: 4 Day(s) or more -
Contact Switches with Stoppers/Ball Contact Screw/IP44
MISUMI
[Features]This is a ball contact, ball plunger type, with a stopper. [Material]·SUS416F
- Volume Discount
Standard Price: MYR 157.87- Days to Ship: 2 Day(s) or more -
Contact Switches with Stoppers/Screw/IP67
MISUMI
This is a positioning switch with a stopper, mini waterproof type, threaded type.
- Volume Discount
Standard Price: MYR 178.22- Days to Ship: 4 Day(s) or more -
Contact Switches with Stoppers/Flanged Screw/IP67
MISUMI
[Features]·This is a pin stroke type, spring plunger type, with a stopper.
- Volume Discount
Standard Price: MYR 182.06- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 140.93- Days to Ship: 1 Day(s) or more -
Standard Price: MYR 180.12 Days to Ship: 2 Day(s) -
Contact Switches with Stoppers/Long Stroke/IP40
MISUMI
This is a positioning switch with a stopper, 1 signal (deceleration) type.
- Volume Discount
Standard Price: MYR 179.87 Days to Ship: 2 Day(s) -
Contact Switches/Heat Resistant/Bolt/IP65
MISUMI
[Features]·Maximum Operating Temperature: 200 degrees. The switch is heat resistant.
- Volume Discount
Standard Price: MYR 911.62 Days to Ship: 4 Day(s) or more -
Mini Contact Switches with Stopper/Heat-Resistant/IP67
MISUMI
[Features]·Maximum Operating Temperature: 200 degrees. The switch is heat resistant.
- Volume Discount
Standard Price: MYR 868.55 Days to Ship: 4 Day(s) or more -
MISUMI
Detection with low contact force is possible. The operating point can be adjusted within the setting range.
- Volume Discount
Standard Price: MYR 396.04 Days to Ship: 9 Day(s) or more -
High Precision Touch Switches/Flat Type/Tapped
MISUMI
[Features]·It supports high-precision positioning with a repeatability of 0.5 µm.
- Volume Discount
Standard Price: MYR 555.75 Days to Ship: 4 Day(s) or more -
Compact Contact Switches/NC Type
MISUMI
A compact contact switch with an outer shape of M5/Φ5 and a minimum length of 17 mm.
Standard Price: MYR 273.37- Days to Ship: 2 Day(s) or more -
METROL
[Features]
A mini switch of ø8×8 mm, that is small in size, having quench stopper.
· Suitable for confined spaces
· Miniaturization of equipment and appliance which is cost-effective
· For straight and deflected angle
· The movable part will move frictionless on the flat spring and hence galling of the movable parts does not occur.
· The waterproof type (IP67) is not only for the movable part, but the surface of the stopper and the interior of the rubber boot is also dust proof.
· The standard size of the mounted parts is so accurate that replacement is very easy.- CAD ：
- 2D
Standard Price: MYR 115.13- Days to Ship: 1 Day(s) or more -
High-Precision MT-Touch Switch P08/P10/P12
METROL
The discretion at the operating point is lesser and it can sustain even adverse environment. (IP67)
[Features]
· the discretion at the operating point is lesser.
· The accuracy of repetition is 0.5 μm (range)
· Judgment errors due to incorrect signal and short-period stop gets minimized
· Can even be used in harsh conditions.
· An IP67 highly waterproof construction.
· No differential response
· Detection of minute displacement can be done continuously.
· The signal does not drift due to power supply voltage or self‐heating
· The switch is unaffected by low current and low voltage, however using it within rated range will ensure long life. (3 million times).- CAD ：
- 2D
Standard Price: MYR 451.70- Days to Ship: 2 Day(s) or more -
CS-Touch Switch for Deflection CSH
METROL
[Features]
A linear bushing is used for the bearing· and it is applicable to sliding, deflection and off-set- CAD ：
- 2D
Standard Price: MYR 277.57- Days to Ship: 2 Day(s) or more -
METROL
[Features]
1 unit dual roles. The spring plunger has an in-built positioning switch.
· Reduction in the number of parts and design man-hour. Ensures miniaturization of the machinery.
· Since it is specifically meant to confirm the spring action, it moves substantially until the start of the operation.
Since there is substantial movement after the operation "Escape," setting the signal is easy and there is no fear of damage even when force is applied while pushing.- CAD ：
- 2D
Standard Price: MYR 146.04- Days to Ship: 4 Day(s) or more -
METROL
[Features]
· Rectangular
· Can be fitted in confined spaces or small equipment
· Long strokes (1.5 mm).
· Contradictory to the switch with attached stopper mini STM, the stroke end does not have a stopper function.- CAD ：
- 2D
Standard Price: MYR 190.98- Days to Ship: 4 Day(s) or more -
Switch for Determining Defective Products
METROL
[Features]
· Low cost and also useful in determining the defective products.
· Cost effective since sequencer is not required.
· The range that has been approved can also be adjusted.Standard Price: MYR 898.50- Days to Ship: 4 Day(s) or more
![Smart Contact Sensor (Distinction Type) [E9NC-T]](http://pre-my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/e9nc-t.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Contact Section Type |
| Main Body Shape |
| Type |
| Contact Stroke S(mm) |
| Contact Point Type |
| Repeatability |
| Body Material |
| Contact Material |
| Environment |
| Cylinder Outer Dia. D(mm) |
| Mounting Screw Nominal M |
| Switch Operating Point P(mm) |
| Contact Section O.D. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | METROL | METROL | METROL | MISUMI | MISUMI | METROL | MISUMI | METROL | METROL | MISUMI | MISUMI | MISUMI | MISUMI | OMRON | METROL | METROL | METROL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | METROL | METROL | METROL | METROL | METROL | METROL |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Days to Ship | 4 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 2 Day(s) | 5 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) | 1 Day(s) or more | 2 Day(s) | 1 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 2 Day(s) | 2 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Contact Section Type | Needle | Needle | Flat / Needle | Flat | Needle | Needle | Needle | Needle | Needle | Needle | Needle | Needle | Needle | Needle | Spherical | Needle | Needle | Needle | Needle | Needle | - | Spherical | Needle | Needle | Needle | Flat / Needle | Needle | Needle | Needle | Needle | Needle | Needle | Needle | Needle | Needle | Needle | Needle | Flat | Needle | Needle | Flat / Needle | Spherical | Needle | Needle | Needle |
| Main Body Shape | Bolt | Bolt / Standard | Bolt / Standard | Square Shape | Bolt | Bolt | Bolt / Hex Head | Bolt | Bolt | Bolt | Standard | Bolt | Standard | Square Shape | Bolt / Standard | Bolt / Standard | Bolt | Bolt | Standard | Bolt | Bolt | Bolt | Bolt | Bolt | Bolt | Bolt | Bolt / Flanged | Standard / Flanged | Bolt | Bolt | Bolt / Flanged | Bolt | Bolt / Hex Head | Bolt | Bolt | Bolt | Bolt | Square Shape | Bolt / Standard | Bolt / Standard / Flanged | Bolt / Standard / Square Shape | Bolt | Bolt | Bolt | Standard |
| Type | Pin Stroke Type | Ball Stroke Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type / Stopper Type | Pin Stroke Type | Ball Stroke Type | Pin Stroke Type / Ball Stroke Type / Anglular Misalignment Tolerant Type / Stopper Type | Pin Stroke Type | Pin Stroke Type / Stopper Type | Pin Stroke Type / Stopper Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type / Anglular Misalignment Tolerant Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type / Anglular Misalignment Tolerant Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type / Ball Stroke Type | Pin Stroke Type / Stopper Type | Pin Stroke Type / Stopper Type | Ball Stroke Type / Stopper Type | Pin Stroke Type / Stopper Type | Pin Stroke Type / Stopper Type | Pin Stroke Type / Stopper Type | Pin Stroke Type / Stopper Type | Pin Stroke Type / Stopper Type | Pin Stroke Type | Pin Stroke Type / Stopper Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type / Ball Stroke Type / Anglular Misalignment Tolerant Type / Stopper Type | Pin Stroke Type / Ball Stroke Type | Pin Stroke Type / Anglular Misalignment Tolerant Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type / Anglular Misalignment Tolerant Type |
| Contact Stroke S(mm) | 5 | 0.8 ～ 1 | 2 ～ 5 | 2 ～ 5 | 1.2 ～ 3 | 2.8 | 0.7 | 3 | 0.8 | 0.3 ～ 2.8 | 2.8 | 0.5 | 0.5 | 3 | 5 ～ 12 | 1.5 | 2.8 | 3 ～ 10 | 2.8 | 2.8 | 2.8 | 2.8 | 2.8 | 2.8 | 3 ～ 10 | 3 ～ 10 | 0.5 | 0.5 | 0.5 | 0.3 | 0.3 | 0.7 | 0.7 | 2.5 | 2.8 | 0.3 | 6 | 3 | 1.5 | 0.3 ～ 0.5 | 3 ～ 10 | 2.8 | 3 | 1.5 | 3 |
| Contact Point Type | Contact Point Normally Open | - | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Closed | - | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | - | No Contact Point, NPN Open Collector / No Contact Point, PNP Open Collector | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | - | Contact Point Normally Closed | Contact Point Normally Closed | Contact Point Normally Open | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Open | Contact Point Normally Open | - |
| Repeatability | 5µm or Less | - | 5µm or Less | 1µm or Less | 0.002mm or Less / 0.001mm or Less | 5µm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 5µm or Less | 0.01mm or Less | 0.01mm or Less | 0.002mm or Less | - | 3µm or Less / 1µm or Less | 5µm or Less | 1µm or Less | 5µm or Less | 5µm or Less | 5µm or Less | 5µm or Less | 5µm or Less | 5µm or Less | 1µm or Less | 1µm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.02mm or Less | 1µm or Less | 3µm or Less | 0.01mm or Less | 1µm or Less | 5µm or Less | 0.01mm or Less | 3µm or Less | 3µm or Less |
| Body Material | Stainless Steel | Stainless Steel | Stainless Steel | Aluminum | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Zinc Alloy | Plastic | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Aluminum | Stainless Steel | Stainless Steel | Stainless Steel / BsBM Ni plating | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Contact Material | Stainless Steel | Carbide | Stainless Steel / Polyacetal | Carbide | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Carbide | Stainless Steel | Stainless Steel | Carbide | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Polyacetal | Stainless Steel | Carbide | Carbide | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Carbide | Stainless Steel | Stainless Steel | Carbide | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel / Carbide |
| Environment | Standard | - | Standard / Waterproof | Waterproof | Standard | Standard | Standard / Waterproof | Standard | Standard | Heat Resistant | Standard | Drip-Proof | Drip-Proof | Standard | Standard | Standard / Waterproof | Waterproof | Waterproof | Standard | Standard | Standard | Standard | Standard | Waterproof | Standard | Standard | Drip-Proof | Drip-Proof | Drip-Proof | Waterproof | Waterproof | Standard | Standard | Standard | Heat Resistant | Heat Resistant | Standard | Standard | Standard / Waterproof | Drip-Proof / Waterproof | Waterproof | Standard | Standard | Standard / Waterproof | Standard / Waterproof |
| Cylinder Outer Dia. D(mm) | - | 4 | 5 ～ 8 | - | - | - | - | - | - | - | 5 ～ 8 | - | 8 | - | 4 ～ 14 | 5 | - | 14 | 6 | - | - | - | - | - | - | - | - | 8 | - | - | - | - | - | - | - | - | - | - | 5 | 8 ～ 11.5 | 8 ～ 10 | - | - | - | - |
| Mounting Screw Nominal M | M8 x 0.75 (Fine) | M5 x 0.5 (Fine) | M5 x 0.5 (Fine) / M6 x 0.75 (Fine) / M6 x 0.5 (Fine) / M8 x 0.75 (Fine) | - | M6 x 0.5 (Fine) / M8 x 0.75 (Fine) | M5 x 0.5 (Fine) / M6 x 0.75 (Fine) | M6 x 1.0 (Coarse) / M8 x 1.25 (Coarse) / M10 x 1.5 (Coarse) | M6 x 1.0 (Coarse) / M8 x 1.25 (Coarse) | M6 x 1.0 (Coarse) | M6 x 1.0 (Coarse) / M6 x 0.75 (Fine) / M10 x 0.75 (Fine) | - | M10 x 0.75 (Fine) | - | - | - | M5 x 0.5 (Fine) | M8 x 0.5 (Fine) | M14 x 0.5 (Fine) | - | M6 x 0.75 (Fine) | M6 x 0.75 (Fine) | M12 x 1.0 (Fine) | M6 x 0.75 (Fine) | M8 x 0.75 (Fine) | M10 x 0.5 (Fine) | M10 x 0.5 (Fine) | M10 x 1.5 (Coarse) | - | M10 x 0.75 (Fine) | M10 x 0.75 (Fine) | M10 x 1.5 (Coarse) | M6 x 1.0 (Coarse) / M8 x 1.25 (Coarse) | M8 x 1.25 (Coarse) | M6 x 1.0 (Coarse) | M6 x 0.75 (Fine) | M10 x 0.75 (Fine) | M14 x 0.5 (Fine) | - | M5 x 0.5 (Fine) | M10 x 1.5 (Coarse) / M10 x 0.75 (Fine) | M10 x 0.5 (Fine) / M8 x 0.5 (Fine) | M12 x 1.0 (Fine) | M6 x 1.0 (Coarse) / M8 x 1.25 (Coarse) | M10 x 0.5 (Fine) | - |
| Switch Operating Point P(mm) | 0.3 | 0.3 | 0.3 | 0 | 0.2～0.5 | 0.3 | 0.3 | 0.8 | 0.5 | 0.15 ～ 0.5 | 0.3 | 0.25 | 0.25 | 0.2～0.5 | - | 0 ～ 0.3 | 0.3 | 0 ～ 0.2 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0 ～ 0.2 | 0 ～ 0.2 | 0.25 | 0.25 | 0.25 | 0.15 | 0.15 | 0.35 | 0.35 | 0.3-0.4 | 0.3 | 0.15 | 2.25 | 0 | 0 | 0.15 ～ 0.25 | 0 ～ 0.2 | 0.3 | 0.8 | 0.3 | 0.3 |
| Contact Section O.D. | ~ Ø4 | ~ Ø4 | ~ Ø2 / ~ Ø4 | ~ Ø6 | ~ Ø2 / ~ Ø4 | ~ Ø2 | - | ~ Ø4 | ~ Ø4 | ~ Ø2 / ~ Ø4 | ~ Ø2 / ~ Ø4 | ~ Ø4 | ~ Ø4 | ~ Ø4 | ~ Ø4 | ~ Ø2 | - | ~ Ø2 | ~ Ø2 | ~ Ø2 | ~ Ø2 / ~ Ø4 | ~ Ø10 | ~ Ø4 | ~ Ø4 | ~ Ø4 | ~ Ø2 / ~ Ø4 | ~ Ø4 | ~ Ø4 | ~ Ø4 | ~ Ø2 | ~ Ø2 | ~ Ø2 | ~ Ø2 | ~ Ø2 | ~ Ø2 | - | ~ Ø4 | ~ Ø6 | ~ Ø2 | ~ Ø2 / ~ Ø4 | ~ Ø2 / ~ Ø4 | ~ Ø10 | ~ Ø4 | ~ Ø2 / ~ Ø4 | ~ Ø2 |
![Smart Contact Sensor (Distinction Type) [E9NC-T]](http://pre-my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/e9nc-t.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Contact Section Type
-
Main Body Shape
-
Type
-
Contact Stroke S(mm)
-
Contact Point Type
-
Repeatability
-
Body Material
-
Contact Material
-
Environment
- Standard
- Drip-Proof
- Waterproof
- Heat Resistant
- Vacuum
-
Cylinder Outer Dia. D(mm)
-
Mounting Screw Nominal M
-
Switch Operating Point P(mm)
-
Contact Section O.D.
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Contact Switches
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy