(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Drill Bits（Coating Type：Other）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
OSG
[Features]
· Carbide 4D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chipsStandard Price: MYR 257.82- Days to Ship: 4 Day(s) or more -
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.Standard Price: MYR 314.43- Days to Ship: 5 Day(s) or more -
Solid Carbide Drills for Stainless (Micro Revolution Drill)_MRS-GDL
OSG
Small diameter carbide drill long type for stainless steel machining. Stainless steel processing provides stable durability.
Standard Price: MYR 114.34- Days to Ship: 5 Day(s) or more -
AQDEXZOH5D Aqua Drill EX Flat Oil Hole 5D
NACHI(FUJIKOSHI)
A 180° flat, internally-lubricated type multi-functional carbide drill.
[Features]
· Allows high efficiency flat drilling up to hole depth 5D.
· A centering hole or guide hole is required.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.Standard Price: MYR 672.29- Days to Ship: 5 Day(s) or more -
Carbide Flat Drill 2D Type_ADF-2D
OSG
[Features]
· Can be used in various applications such as counterboring of inclined and curved surfaces and semi-split hole drilling.
· The wear-resistant layer suppresses abrasion and prevents crack propagation due to the periodic nano-layered coating.
· The original bottom edge shape reduces the cutting resistance and achieves stable processing.Standard Price: MYR 236.13- Days to Ship: 4 Day(s) or more -
NACHI(FUJIKOSHI)
A drill that can steplessly drill deep holes up to L/D20.
[Features]
· Adopts AG coating with excellent wear resistance to realize a longer life.
· Chip-flow is improved while maintaining rigidity thanks to its non-stepped slot shape.
[Applications]
· Ideal for deep hole machining for anything from raw materials to mold steel.Standard Price: MYR 71.43- Days to Ship: 5 Day(s) or more -
NACHI(FUJIKOSHI)
Drill capable of stable hole drilling with AG coating excellent in heat resistance.
[Features]
· Newly developed optimal drill shape adopted for machining high alloy HSS, AG coatings, and stainless steel.
· It has a cutting edge shape that's excellent in the segmentation of chips and a groove shape that achieves both high chip discharge performance and drill rigidity.
· Stable machining accuracy is achieved by using a high-precision end mill shank.
[Applications]
· Optimal for stainless steel.Standard Price: MYR 36.86- Days to Ship: 5 Day(s) or more -
Solid Carbide Drills TiAlN coated Stub for Hardened Steels_FH-GDS
OSG
Developed for machining small diameter holes in hardened steel, it is suitable for high-precision and long-life machining of shallow holes (up to 3D or so)
Standard Price: MYR 308.89- Days to Ship: 5 Day(s) or more -
HSS Extra Long Type 20D Type TDXL20D
OSG
Long drill that has achieved ultra-deep drilling up to 20D with HSS drill bit.
Standard Price: MYR 108.27- Days to Ship: 5 Day(s) or more -
Carbide Drill with Internal Coolant Supply (8D Type)_ADO-8D
OSG
[Features]
· Carbide 8D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life.
The use of a middle margin improves stability when machining deep holesStandard Price: MYR 609.78- Days to Ship: 9 Day(s) or more -
Carbide Drill with Internal Coolant Supply (10D Type)_ADO-10D
OSG
[Features]
· Ultra-hard 10D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life.
The use of a middle margin improves stability when machining deep holesStandard Price: MYR 732.17- Days to Ship: 9 Day(s) or more -
Aqua Drill EX Oil Hole 5D AQDEXOH5D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
· Capable of stable wet processing and MQL processing.
· For highly-efficient hole drilling up to 5 times the drill diameter.
[Applications]
· Ideal for stable processing of mild steel to high hardness materials, as well as work materials with difficult chip processing.Standard Price: MYR 609.34- Days to Ship: 5 Day(s) or more -
NACHI(FUJIKOSHI)
A drill that is difficult to break and stable for machining.
[Features]
· Employs cemented carbide ideal for small diameter hole drilling.
· A drill with high rigidity is used.
· The cutting load has been reduced by circumferential clearance and thinning.
[Applications]
· Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.Standard Price: MYR 145.64- Days to Ship: 5 Day(s) or more -
Solid Carbide Drills Stub for Byway and Precision Operation_WX-MS-GDS
OSG
Achieves high precision and high performance for drilling ultra-fine diameters for precision equipment or IT components
Standard Price: MYR 104.21- Days to Ship: 5 Day(s) or more -
Solid Carbide Drills TiAlN coated 3 Flutes Stub with Long Neck for Hardened Steels_FHL-GDTS
OSG
Enables highly accurate machining of ultra-deep holes of 10 to 20 D in hardened steel which conventionally was only possible via electric discharge machining, realizing a great reduction in total drilling time.
Standard Price: MYR 398.78- Days to Ship: 5 Day(s) or more -
GOLD Drills V coated Medium with Morse Taper Shank_V-MT-GDN
OSG
V-coated tapered shank and medium type drill with special attention given to reducing thrust and improving usability with lathes
Standard Price: MYR 389.32- Days to Ship: 5 Day(s) or more -
VP-GOLD Drills Stub for Hardened Steel_VPH-GDS
OSG
Exerts excellent cost performance for tempered steel processing of 40 to 50 HRC
Standard Price: MYR 66.99- Days to Ship: 5 Day(s) or more -
UTDLX UT, Micro Coating Unimax Long Blade Drill Bit
UNION TOOL
[Features]
· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.
· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials
· The newly designed drill shape and X-thinning provide improved impact fracture resistance (durability performance) and reduced variation when drilling multiple holes
· The tip angle is set to 130° to suppress the burr height in through holes
· Groove length 15 times larger than the diameter enables highly precise drilling of deep holes.Standard Price: MYR 156.59- Days to Ship: 5 Day(s) or more -
C-UMD, Micro Coat, 2-Flute UNIMAX Drill Bit
UNION TOOL
[Features]
·UT microcoating.
·Tip angle 150
·Tool Material: CarbideStandard Price: MYR 93.72- Days to Ship: 8 Day(s) or more -
DIJET
[Features]
Tips for exchanging cuttings type drills with easy tip replacement and excellent cutting performance.Standard Price: MYR 415.66- Days to Ship: 5 Day(s) or more -
Stainless Steel Drill 5×D RT100VA 8511
GUHRING
Offers high cutting speed and long service life when machining stainless steel, helping achieve highly precise hole drilling.
Standard Price: MYR 662.83- Days to Ship: 7 Day(s) or more -
Straight Shank Drill Long Total Length 400 mm GT100 S400
GUHRING
[Features]
· A high rigidity drill for drilling deep holes with excellent chip discharge.Standard Price: MYR 576.86- Days to Ship: 5 Day(s) or more -
GUHRING
A widely applicable insert used for materials from general steel to stainless steel.
Standard Price: MYR 514.31- Days to Ship: 7 Day(s) or more -
Standard Price: MYR 159.96- Days to Ship: 5 Day(s) or more -
Hexagonal Bolt Drill with Step For Submerged Use DCB-SRM
EIKOSHA
Step drill (HSS) with integrated drill fluting.
[Features]
· Hole drilling for hex socket head bolt and countersinking can be performed simultaneously.
· A straight shank.
[Applications]
· Ideal for simultaneous machining involving drilling and sinking.Standard Price: MYR 215.27- Days to Ship: 5 Day(s) or more -
Aqua Drill EX Flat Regular AQDEXZR
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
· Flat drill for 4D boring depth with excellent drilling performance.
· A centering hole or guide hole is required.
[Applications]
· Countersinking on inclined surfaces and correction of eccentric bores.
· Multifunctional drill that can be used for a wide range of applications, such as thin plate burrless processing, etc.Standard Price: MYR 363.46- Days to Ship: 5 Day(s) or more -
UDCMX 2-flute for machining cemented carbide and hard brittle materials
UNION TOOL
[Features]
· The newly developed diamond coating and X-thinning enable high efficiency drilling in carbide alloys.Standard Price: MYR 620.21- Days to Ship: 9 Day(s) or more -
Carbide Drill with Internal Coolant Supply (5D Type)_ADO-SUS-5D
OSG
[Features]
· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work.
5D type with oil holeStandard Price: MYR 478.62- Days to Ship: 9 Day(s) or more -
NACHI(FUJIKOSHI)
Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
[Features]
· New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
· 50C type capable of high-speed machining at a cutting speed of 60 m/min.
· The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
[Applications]
· Convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.Standard Price: MYR 45.82- Days to Ship: 5 Day(s) or more -
NACHI(FUJIKOSHI)
3-flute carbide drill capable of high-precision drilling and reamer-less processing.
[Features]
· High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.
· Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.
· Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.
[Applications]
· High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.Standard Price: MYR 143.08- Days to Ship: 5 Day(s) or more -
NACHI(FUJIKOSHI)
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
[Features]
· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
[Applications]
· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.Standard Price: MYR 453.96- Days to Ship: 5 Day(s) or more -
Aqua Drill with Bottom Blade 3-Flute AQDED3F
NACHI(FUJIKOSHI)
Coated carbide drill which achieves high efficiency machining of holes in cast materials and screw pilot holes.
[Features]
· Cast iron and aluminum cast parts have a high performance machined hole with H7 precision.
· 3-flute cutting edge with excellent cutting balance minimizes cutting vibration during machining.
· Finish processing is possible with work efficiency of 10 times or more compared to a reamer.
[Applications]
· 3-flute cutting edge with excellent cutting balance ideal for high-quality machining.Standard Price: MYR 358.67- Days to Ship: 5 Day(s) or more -
NACHI(FUJIKOSHI)
Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
[Features]
· New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
· 50C type capable of high-speed machining at a cutting speed of 60 m/min.
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
· The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
[Applications]
· Also convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.Standard Price: MYR 60.04- Days to Ship: 2 Day(s) or more -
NACHI(FUJIKOSHI)
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating.
· Longer life by improving lubricity and heat/abrasion resistance.
· The unique thinning shape increases biting and reduces cutting resistance.
[Applications]
· Ideal for thin work materials and small low-rigidity processing machines.Standard Price: MYR 404.30- Days to Ship: 5 Day(s) or more -
NACHI(FUJIKOSHI)
A carbide drill with an optimum design for FC materials that provides a longer service life than conventional products.
[Features]
· Combination of cemented carbide ideal for FC material and Aquacoat with excellent heat and wear resistance.
· Longer life than conventional FC drills.
· The special cutting edge treatment suppresses wear of the corners most easily damaged in FC processing.
· A lifetime of 70% of that of new products is guaranteed after re-grinding, even if there is no recoating.
[Applications]
· Ideal for long life machining of FC, FCD, and low carbon steel.Standard Price: MYR 371.66- Days to Ship: 5 Day(s) or more -
NACHI(FUJIKOSHI)
Carbide drill capable of high efficiency machining of high-hardness steel of 50 to 70 HRC.
[Features]
· It uses carbide alloy ideal for high-hardness steel machining and AquaCoat, which has excellent heat resistance and abrasion resistance.
· Wear resistance and chipping resistance are greatly improved.
· Uses a thick core and weak torsion.
· The high rigidity makes it resistant against vibration as well, preventing damage from microchipping, etc.
[Applications]
· High performance machining of 50 to 70 HRC high hardness steel is possible.Standard Price: MYR 135.31- Days to Ship: 5 Day(s) or more -
NACHI(FUJIKOSHI)
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating to improve the lubricity, heat resistance and abrasion resistance, thereby prolonging the service life.
[Applications]
· The unique thinning shape increases biting and reduces cutting resistance.
· Stable cutting performance even with thin work materials and small low-rigidity processing machines.Standard Price: MYR 369.20- Days to Ship: 5 Day(s) or more -
Aqua Drill EX Oil Hole 3D AQDEXOH3D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
[Applications]
· Stable processing of mild steel to high hardness materials.Standard Price: MYR 514.06- Days to Ship: 5 Day(s) or more -
Aqua Drill EX Oil Hole 8D AQDEXOH8D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
[Applications]
· Stable processing of mild steel to high hardness materials.Standard Price: MYR 719.66- Days to Ship: 5 Day(s) or more -
Aqua Drill, Stub, Carbide Drill, AQDS
NACHI(FUJIKOSHI)
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
[Features]
· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
[Applications]
· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.
· Drill for dry machining.Standard Price: MYR 387.28- Days to Ship: 5 Day(s) or more -
OSG
Achieves 20D deep drilling of high hardness mold materials (45 to 55 HRC) with high stability, long life, and high efficiency
Standard Price: MYR 1,782.98- Days to Ship: 5 Day(s) or more -
Solid Carbide Drills TiAlN coated Medium for Hardened Steels_FH-GDN
OSG
Developed for machining small diameter holes in hardened steel, it is capable of machining deep holes (up to 7D or so)
Standard Price: MYR 338.85- Days to Ship: 5 Day(s) or more -
Solid Carbide Ultra Small Size UVM Drills (10D Type)_UVM-DRL-10D
OSG
Because it uses carbide materials, it has both high hardness and elastic modulus, making it possible to drill extremely small holes in general steel, heat-treated steel, and high hardness steel.
Standard Price: MYR 630.89- Days to Ship: 5 Day(s) or more -
Solid Carbide Ultra Small Size UVM Drills (5D Type)_UVM-DRL-5D
OSG
Ultra-small diameter UVM drill 5D type to achieve drilling with a minimum diameter of ø0.02.
Standard Price: MYR 538.04- Days to Ship: 5 Day(s) or more -
Solid Carbide Ultra Small Size UVM Drills (Starting Drills)_UVM-LDS
OSG
The collaboration with UVM-DRL enables high-precision drilling
Standard Price: MYR 1,204.83 Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Hole diameter (drill diameter) D(mm) |
| Overall Length L(mm) |
| Groove Length L(mm) |
| work material |
| Shank Type |
| Tool Material Type |
| With/without Oil Hole |
| Coating Y/N |
| Coating Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | NACHI(FUJIKOSHI) | OSG | NACHI(FUJIKOSHI) | OSG | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | DIJET | GUHRING | GUHRING | GUHRING | GUHRING | EIKOSHA | NACHI(FUJIKOSHI) | UNION TOOL | OSG | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG |
| Product Series | Solid Carbide Drills for Stainless (Micro Revolution Drill)_MRS-GDL | Solid Carbide Drills TiAlN coated Stub for Hardened Steels_FH-GDS | Carbide Drill with Internal Coolant Supply (10D Type)_ADO-10D | Solid Carbide Drills Stub for Byway and Precision Operation_WX-MS-GDS | Solid Carbide Drills TiAlN coated 3 Flutes Stub with Long Neck for Hardened Steels_FHL-GDTS | UDCMX 2-flute for machining cemented carbide and hard brittle materials | Carbide Drill with Internal Coolant Supply (5D Type)_ADO-SUS-5D | Solid Carbide Drills TiAlN coated Medium for Hardened Steels_FH-GDN | Solid Carbide Ultra Small Size UVM Drills (10D Type)_UVM-DRL-10D | Solid Carbide Ultra Small Size UVM Drills (5D Type)_UVM-DRL-5D | Solid Carbide Ultra Small Size UVM Drills (Starting Drills)_UVM-LDS | ||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Hole diameter (drill diameter) D(mm) | 2 ～ 20 | 0.5 ～ 20 | 0.1 ～ 3 | 3 ～ 16 | 2 ～ 20 | 1 ～ 13 | 1 ～ 20 | 0.3 ～ 2 | 1.5 ～ 12 | 3 ～ 13 | 3 ～ 12 | 1 ～ 16 | 0.2 ～ 1.99 | 0.1 ～ 5 | 1 ～ 3 | 6 ～ 32 | 0.5 ～ 20 | 0.3 ～ 3 | 0.1 ～ 3 | 14 ～ 32 | 3 ～ 20 | 4 ～ 13 | - | 2.4 ～ 96 | 3.4 ～ 20 | 3 ～ 20 | 0.4 ～ 3.5 | 2 ～ 20 | 1 ～ 19.5 | 3 ～ 16 | 3.7 ～ 10 | 3 ～ 12 | 2.1 ～ 20 | 2.1 ～ 16 | 2 ～ 12 | 2 ～ 12 | 2.1 ～ 16 | 3 ～ 16 | 3 ～ 16 | 4 ～ 12.5 | 6 ～ 10 | 0.3 ～ 2 | 0.02 ～ 0.09 | 0.02 ～ 0.09 | 0.05 |
| Overall Length L(mm) | 66 ～ 153 | 47 ～ 145 | 38 ～ 66 | 74 ～ 178 | 50 ～ 140 | - | 50 ～ 210 | 38 ～ 46 | 85 ～ 350 | 80 ～ 206 | 90 ～ 215 | 56 ～ 194 | 38 ～ 47 | 38 ～ 64 | 57 ～ 65 | 123 ～ 248 | 38 ～ 132 | 38 ～ 80 | 38 | - | 66 ～ 153 | 400 | - | 111 ～ 534 | 65 ～ 145 | 60 ～ 195 | 38 ～ 50 | 70 ～ 205 | 40 ～ 168 | 48 ～ 144 | 56 ～ 110 | 48 ～ 108 | 56 ～ 210 | 49 ～ 160 | 47 ～ 130 | 44 ～ 108 | 45 ～ 112 | 68 ～ 146 | 81 ～ 242 | 54 ～ 110 | 190 ～ 280 | 38 ～ 50 | 38 | 38 | 38 |
| Groove Length L(mm) | 20 ～ 101 | 1.65 ～ 90 | 1.2 ～ 36 | 20 ～ 104 | 10 ～ 88 | 33 ～ 235 | 12 ～ 140 | 1.6 ～ 12 | 38 ～ 276 | 33 ～ 143 | 40 ～ 155 | 8 ～ 128 | 2.5 ～ 15 | 0.6 ～ 26 | 5 ～ 15 | 43 ～ 128 | 3 ～ 66 | 4.5 ～ 45 | 1.2 ～ 12 | - | 28 ～ 101 | 250 | - | 30 ～ 280 | 13 ～ 45 | 19 ～ 126 | 4 ～ 12 | 18 ～ 140 | 6 ～ 94 | 16 ～ 80 | 24 ～ 60 | 16 ～ 51 | 24 ～ 140 | 17 ～ 96 | 15 ～ 73 | 12 ～ 51 | 10 ～ 55 | 17 ～ 80 | 33 ～ 176 | 22 ～ 51 | 140 ～ 230 | 2.5 ～ 18 | 0.22 ～ 0.99 | 0.12 ～ 0.54 | 0.075 |
| work material | general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | Stainless Steel[◎] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / Cast Iron[◎] | general steel[◎] / Stainless Steel[◎] | Quenched and tempered steel[○] / high hardness steel[◎] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Quenched and tempered steel[○] / high hardness steel[◎] | general steel[◎] / Quenched and tempered steel[○/◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Titanium[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | - | general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[○] / Resin[◎] | general steel[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | - | general steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Cast Iron[◎] | high hardness steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | high hardness steel[◎] | Quenched and tempered steel[○] / high hardness steel[◎] | Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] |
| Shank Type | End Mill Shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | - | End Mill Shank / straight shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | - | - | straight shank | - | Taper shank | straight shank | - | - | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt HSS | High-speed steel | Carbide | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | High Vanadium HSS | Powder high-speed steel | Carbide | Carbide | - | Carbide | Cobalt HSS | Carbide | High-speed steel | High-speed steel | Carbide | - | Carbide | High-speed steel | Carbide | Carbide | Carbide | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| With/without Oil Hole | NA | NA | NA | Available | NA | - | NA | Available | NA | Available | Available | Available | NA | NA | NA | NA | NA | NA | NA | - | Available | NA | NA | NA | NA | - | - | Available | NA | NA | NA | NA | NA | NA | NA | NA | - | Available | Available | NA | Available | NA | NA | NA | NA |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | - | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Coating Type | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other |
Loading...
Configure
Specification/Dimensions
-
Hole diameter (drill diameter) D(mm)
-
0～0.995
- 0
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.035
- 0.04
- 0.045
- 0.05
- 0.055
- 0.06
- 0.065
- 0.07
- 0.075
- 0.08
- 0.085
- 0.09
- 0.095
- 0.1
- 0.105
- 0.11
- 0.115
- 0.12
- 0.125
- 0.128
- 0.13
- 0.135
- 0.14
- 0.143
- 0.145
- 0.147
- 0.15
- 0.155
- 0.16
- 0.165
- 0.17
- 0.175
- 0.18
- 0.185
- 0.19
- 0.195
- 0.2
- 0.205
- 0.21
- 0.215
- 0.22
- 0.225
- 0.23
- 0.235
- 0.24
- 0.245
- 0.25
- 0.255
- 0.26
- 0.265
- 0.27
- 0.275
- 0.28
- 0.285
- 0.29
- 0.295
- 0.3
- 0.305
- 0.31
- 0.315
- 0.32
- 0.325
- 0.33
- 0.335
- 0.34
- 0.345
- 0.35
- 0.355
- 0.36
- 0.365
- 0.37
- 0.375
- 0.38
- 0.385
- 0.39
- 0.395
- 0.4
- 0.405
- 0.41
- 0.415
- 0.42
- 0.425
- 0.43
- 0.432
- 0.435
- 0.44
- 0.445
- 0.45
- 0.455
- 0.46
- 0.465
- 0.47
- 0.475
- 0.48
- 0.485
- 0.49
- 0.495
- 0.5
- 0.505
- 0.51
- 0.515
- 0.52
- 0.525
- 0.53
- 0.535
- 0.54
- 0.545
- 0.55
- 0.555
- 0.56
- 0.565
- 0.57
- 0.575
- 0.58
- 0.585
- 0.59
- 0.595
- 0.6
- 0.605
- 0.61
- 0.615
- 0.62
- 0.625
- 0.63
- 0.632
- 0.635
- 0.64
- 0.645
- 0.65
- 0.655
- 0.66
- 0.665
- 0.67
- 0.675
- 0.68
- 0.685
- 0.69
- 0.695
- 0.7
- 0.705
- 0.71
- 0.715
- 0.72
- 0.725
- 0.73
- 0.735
- 0.74
- 0.745
- 0.75
- 0.755
- 0.76
- 0.765
- 0.77
- 0.775
- 0.78
- 0.785
- 0.79
- 0.795
- 0.8
- 0.805
- 0.81
- 0.815
- 0.82
- 0.825
- 0.83
- 0.835
- 0.84
- 0.845
- 0.85
- 0.855
- 0.86
- 0.865
- 0.87
- 0.875
- 0.88
- 0.885
- 0.89
- 0.895
- 0.9
- 0.905
- 0.91
- 0.915
- 0.92
- 0.925
- 0.93
- 0.935
- 0.94
- 0.945
- 0.95
- 0.955
- 0.96
- 0.965
- 0.97
- 0.975
- 0.98
- 0.985
- 0.99
- 0.995
-
1
-
1～1.995
- 1.005
- 1.01
- 1.015
- 1.02
- 1.025
- 1.03
- 1.035
- 1.04
- 1.045
- 1.05
- 1.055
- 1.06
- 1.065
- 1.07
- 1.075
- 1.08
- 1.085
- 1.09
- 1.095
- 1.1
- 1.105
- 1.11
- 1.115
- 1.12
- 1.125
- 1.13
- 1.135
- 1.14
- 1.145
- 1.15
- 1.155
- 1.16
- 1.165
- 1.17
- 1.175
- 1.18
- 1.185
- 1.19
- 1.195
- 1.2
- 1.205
- 1.21
- 1.215
- 1.22
- 1.225
- 1.23
- 1.235
- 1.24
- 1.245
- 1.25
- 1.255
- 1.26
- 1.265
- 1.27
- 1.275
- 1.28
- 1.285
- 1.29
- 1.295
- 1.3
- 1.305
- 1.31
- 1.315
- 1.32
- 1.325
- 1.33
- 1.335
- 1.34
- 1.345
- 1.35
- 1.355
- 1.36
- 1.365
- 1.37
- 1.375
- 1.38
- 1.385
- 1.39
- 1.395
- 1.4
- 1.405
- 1.41
- 1.415
- 1.42
- 1.425
- 1.43
- 1.435
- 1.44
- 1.445
- 1.45
- 1.455
- 1.46
- 1.465
- 1.47
- 1.475
- 1.48
- 1.485
- 1.49
- 1.495
- 1.5
- 1.5X10D
- 1.505
- 1.51
- 1.515
- 1.52
- 1.525
- 1.53
- 1.535
- 1.54
- 1.545
- 1.55
- 1.555
- 1.56
- 1.565
- 1.57
- 1.575
- 1.58
- 1.585
- 1.59
- 1.595
- 1.6
- 1.6×10D
- 1.605
- 1.61
- 1.615
- 1.62
- 1.625
- 1.63
- 1.635
- 1.64
- 1.645
- 1.65
- 1.655
- 1.66
- 1.665
- 1.67
- 1.675
- 1.68
- 1.685
- 1.69
- 1.695
- 1.7
- 1.7X10D
- 1.705
- 1.71
- 1.715
- 1.72
- 1.725
- 1.73
- 1.735
- 1.74
- 1.745
- 1.75
- 1.755
- 1.76
- 1.765
- 1.77
- 1.775
- 1.78
- 1.785
- 1.79
- 1.795
- 1.8
- 1.8×10D
- 1.805
- 1.81
- 1.815
- 1.82
- 1.825
- 1.83
- 1.835
- 1.84
- 1.845
- 1.85
- 1.855
- 1.86
- 1.865
- 1.87
- 1.875
- 1.88
- 1.885
- 1.89
- 1.895
- 1.9
- 1.9X10D
- 1.905
- 1.91
- 1.915
- 1.92
- 1.925
- 1.93
- 1.935
- 1.94
- 1.945
- 1.95
- 1.955
- 1.96
- 1.965
- 1.97
- 1.975
- 1.98
- 1.984
- 1.985
- 1.99
- 1.995
-
2～2.99
- 2
- 2×10D
- 2.01
- 2.015
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.1×10D
- 2.11
- 2.115
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.2×10D
- 2.21
- 2.215
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.3×10D
- 2.31
- 2.315
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.383
- 2.39
- 2.4
- 2.4×10D
- 2.41
- 2.415
- 2.42
- 2.43
- 2.439
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.489
- 2.49
- 2.5
- 2.5×10D
- 2.51
- 2.515
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.578
- 2.58
- 2.59
- 2.6
- 2.6×10D
- 2.61
- 2.615
- 2.62
- 2.63
- 2.64
- 2.642
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.7×10D
- 2.705
- 2.71
- 2.715
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.779
- 2.78
- 2.79
- 2.8
- 2.8×10D
- 2.81
- 2.815
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.9×10D
- 2.91
- 2.915
- 2.92
- 2.93
- 2.94
- 2.947
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3×10D
- 3.01
- 3.02
- 3.03
- 3.04
- 3.048
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.1×10D
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.2×10D
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.264
- 3.27
- 3.28
- 3.29
- 3.3
- 3.3×10D
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.4×10D
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.455
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.5×10D
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.571
- 3.58
- 3.59
- 3.6
- 3.6×10D
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.658
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.7×10D
- 3.71
- 3.72
- 3.73
- 3.734
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.8×10D
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.9×10D
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4×10D
- 4.01
- 4.02
- 4.03
- 4.039
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.1×10D
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.176
- 4.18
- 4.19
- 4.2
- 4.2×10D
- 4.21
- 4.217
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.3×10D
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.366
- 4.37
- 4.38
- 4.39
- 4.4
- 4.4×10D
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.5×10D
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.6×10D
- 4.61
- 4.62
- 4.623
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.7×10D
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.763
- 4.77
- 4.78
- 4.79
- 4.8
- 4.8×10D
- 4.81
- 4.82
- 4.83
- 4.837
- 4.84
- 4.85
- 4.852
- 4.86
- 4.864
- 4.87
- 4.88
- 4.89
- 4.9
- 4.9×10D
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5×10D
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.1×10D
- 5.106
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.159
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.2×10D
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.3×10D
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.4×10D
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.49999999999999
- 5.5
- 5.5×10D
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.558
- 5.56
- 5.565
- 5.57
- 5.58
- 5.59
- 5.59999999999999
- 5.6
- 5.6×10D
- 5.61
- 5.616
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.69999999999999
- 5.7
- 5.7×10D
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.79999999999999
- 5.8
- 5.8×10D
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.89999999999999
- 5.9
- 5.9×10D
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.954
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.99
- 6
- 6×10D
- 6.01
- 6.02
- 6.03
- 6.04
- 6.05
- 6.06
- 6.07
- 6.08
- 6.09
- 6.09999999999999
- 6.1
- 6.1×10D
- 6.13
- 6.15
- 6.19999999999999
- 6.2
- 6.2×10D
- 6.23
- 6.25
- 6.29999999999999
- 6.3
- 6.3×10D
- 6.33
- 6.35
- 6.35 (¼")
- 6.365
- 6.375
- 6.39999999999999
- 6.4
- 6.4×10D
- 6.43
- 6.45
- 6.49999999999999
- 6.5
- 6.5×10D
- 6.528
- 6.53
- 6.55
- 6.59999999999999
- 6.6
- 6.6×10D
- 6.63
- 6.65
- 6.69999999999999
- 6.7
- 6.7×10D
- 6.73
- 6.746
- 6.75
- 6.8
- 6.8×10D
- 6.83
- 6.85
- 6.89999999999999
- 6.9
- 6.9×10D
- 6.93
- 6.95
- 6.97
- 6.98
- 6.99
-
7～7.99
- 7
- 7×10D
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.09999999999999
- 7.1
- 7.1×10D
- 7.13
- 7.14
- 7.145
- 7.15
- 7.19999999999999
- 7.2
- 7.2×10D
- 7.23
- 7.25
- 7.29999999999999
- 7.3
- 7.3×10D
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39999999999999
- 7.4
- 7.4×10D
- 7.43
- 7.45
- 7.49999999999999
- 7.5
- 7.5×10D
- 7.52
- 7.53
- 7.54
- 7.541
- 7.55
- 7.59999999999999
- 7.6
- 7.6×10D
- 7.63
- 7.65
- 7.67
- 7.69999999999999
- 7.7
- 7.7×10D
- 7.73
- 7.75
- 7.79999999999999
- 7.8
- 7.8×10D
- 7.83
- 7.85
- 7.89999999999999
- 7.9
- 7.9×10D
- 7.93
- 7.938
- 7.94
- 7.94 to 8.49
- 7.95
- 7.953
- 7.97
- 7.98
- 7.99
-
8～8.99
- 8
- 8×10D
- 8.01
- 8.02
- 8.03
- 8.04
- 8.05
- 8.06
- 8.07
- 8.08
- 8.09
- 8.09999999999999
- 8.1
- 8.1×10D
- 8.13
- 8.15
- 8.19999999999999
- 8.2
- 8.2×10D
- 8.23
- 8.25
- 8.29999999999998
- 8.3
- 8.3×10D
- 8.33
- 8.334
- 8.35
- 8.39999999999998
- 8.4
- 8.4×10D
- 8.43
- 8.433
- 8.45
- 8.5
- 8.50 to 8.99
- 8.5×10D
- 8.50000000000001
- 8.53
- 8.55
- 8.58
- 8.59999999999998
- 8.6
- 8.6×10D
- 8.61
- 8.63
- 8.65
- 8.69999999999998
- 8.7
- 8.7×10D
- 8.73
- 8.733
- 8.75
- 8.79999999999998
- 8.8
- 8.8×10D
- 8.80000000000001
- 8.83
- 8.84
- 8.85
- 8.89999999999998
- 8.9
- 8.9×10D
- 8.90000000000001
- 8.93
- 8.95
- 8.96
- 8.98
- 8.99
-
9～9.99
- 9
- 9.00 to 9.49
- 9×10D
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.09999999999998
- 9.1
- 9.1×10D
- 9.129
- 9.13
- 9.15
- 9.19999999999998
- 9.2
- 9.2×10D
- 9.20000000000001
- 9.21
- 9.23
- 9.24
- 9.25
- 9.26
- 9.29999999999998
- 9.3
- 9.3×10D
- 9.30000000000001
- 9.33
- 9.34
- 9.347
- 9.35
- 9.36
- 9.38
- 9.39999999999998
- 9.4
- 9.4×10D
- 9.40000000000001
- 9.43
- 9.45
- 9.49999999999998
- 9.5
- 9.50 to 9.99
- 9.5×10D
- 9.50 to 11.07
- 9.50000000000001
- 9.52
- 9.525
- 9.53
- 9.54
- 9.55
- 9.59999999999998
- 9.6
- 9.6×10D
- 9.60000000000001
- 9.63
- 9.65
- 9.69999999999998
- 9.7
- 9.7×10D
- 9.70000000000001
- 9.73
- 9.75
- 9.79999999999998
- 9.8
- 9.8×10D
- 9.80000000000001
- 9.83
- 9.85
- 9.89999999999998
- 9.9
- 9.9×10D
- 9.90000000000001
- 9.92
- 9.921
- 9.93
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.99
- 10
- 10×10D
- 10.00 to 10.49
- 10.01
- 10.02
- 10.03
- 10.04
- 10.05
- 10.06
- 10.07
- 10.08
- 10.09
- 10.1
- 10.1×10D
- 10.13
- 10.15
- 10.2
- 10.2×10D
- 10.23
- 10.25
- 10.3
- 10.3×10D
- 10.32
- 10.33
- 10.35
- 10.4
- 10.4×10D
- 10.43
- 10.45
- 10.5
- 10.5×10D
- 10.50 to 10.99
- 10.53
- 10.55
- 10.6
- 10.6×10D
- 10.63
- 10.65
- 10.7
- 10.7×10D
- 10.716
- 10.72
- 10.73
- 10.75
- 10.8
- 10.8×10D
- 10.83
- 10.85
- 10.9
- 10.9×10D
- 10.93
- 10.95
- 10.96
- 10.98
- 10.99
-
11～11.99
- 11
- 11×10D
- 11.00 to 11.49
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.1×10D
- 11.10 to 12.95
- 11.11
- 11.113
- 11.13
- 11.133
- 11.15
- 11.2
- 11.2×10D
- 11.22
- 11.23
- 11.24
- 11.25
- 11.3
- 11.3×10D
- 11.33
- 11.34
- 11.35
- 11.36
- 11.38
- 11.4
- 11.4×10D
- 11.43
- 11.45
- 11.5
- 11.5×10D
- 11.50 to 11.99
- 11.509
- 11.51
- 11.53
- 11.55
- 11.56
- 11.6
- 11.6×10D
- 11.63
- 11.65
- 11.7
- 11.7×10D
- 11.73
- 11.75
- 11.8
- 11.8×10D
- 11.83
- 11.85
- 11.9
- 11.9×10D
- 11.908
- 11.91
- 11.93
- 11.95
- 11.96
- 11.98
- 11.99
-
12～12.99
- 12
- 12×10D
- 12.00 to 12.49
- 12.0 or more, less than 12.5
- 12.00 to 12.99
- 12.01
- 12.02
- 12.03
- 12.04
- 12.05
- 12.06
- 12.07
- 12.08
- 12.09
- 12.1
- 12.2
- 12.25
- 12.3
- 12.304
- 12.4
- 12.5
- 12.50 to 12.99
- 12.5 or more, less than 13.0
- 12.55
- 12.6
- 12.7
- 12.75
- 12.8
- 12.9
- 12.95
- 12.96
- 12.98
- 12.98 to 17.65
- 12.99
-
13～13.99
- 13
- 13.00 to 13.49
- 13.0 or more, less than 13.5
- 13.00 to 13.99
- 13.01
- 13.02
- 13.03
- 13.096
- 13.1
- 13.2
- 13.25
- 13.3
- 13.4
- 13.43
- 13.49
- 13.5
- 13.50 to 13.99
- 13.5 or more and 14.5 or less
- 13.55
- 13.6
- 13.7
- 13.75
- 13.8
- 13.89
- 13.891
- 13.9
- 13.95
- 13.98
- 13.99
-
14～14.99
- 14
- 14.00 to 14.49
- 14.0～14.5
- 14.00 to 14.99
- 14~16
- 14.01
- 14.02
- 14.03
- 14.1
- 14.2
- 14.25
- 14.288
- 14.29
- 14.3
- 14.4
- 14.5
- 14.50 to 14.99
- 14.6
- 14.6～15.5
- 14.68
- 14.684
- 14.7
- 14.75
- 14.8
- 14.9
- 14.95
- 14.96
- 14.98
- 14.99
-
15～15.99
- 15
- 15.00 to 15.99
- 15.01
- 15.02
- 15.03
- 15.08
- 15.083
- 15.1
- 15.2
- 15.25
- 15.3
- 15.4
- 15.479
- 15.48
- 15.5
- 15.50 to 17.65
- 15.55
- 15.6
- 15.6～16.5
- 15.7
- 15.75
- 15.8
- 15.87
- 15.875
- 15.9
- 15.95
- 15.98
- 15.99
-
16～16.99
- 16
- 16.00 to 16.99
- 16.01
- 16.02
- 16.03
- 16.1
- 16.2
- 16.25
- 16.27
- 16.271
- 16.3
- 16.4
- 16.5
- 16.5~19.5
- 16.6
- 16.6～17.5
- 16.67
- 16.7
- 16.75
- 16.8
- 16.9
- 16.98
- 16.99
-
17～17.99
- 17
- 17.00 to 17.99
- 17.01
- 17.02
- 17.03
- 17.07
- 17.1
- 17.2
- 17.25
- 17.3
- 17.4
- 17.46
- 17.463
- 17.5
- 17.53 to 24.38
- 17.55
- 17.6
- 17.6～18.5
- 17.7
- 17.75
- 17.8
- 17.86
- 17.9
- 17.98
- 17.99
-
18～18.99
- 18
- 18.00 to 18.99
- 18.00 to 19.99
- 18.01
- 18.02
- 18.03
- 18.1
- 18.2
- 18.25
- 18.258
- 18.26
- 18.3
- 18.4
- 18.5
- 18.6
- 18.6～19.5
- 18.65
- 18.654
- 18.7
- 18.75
- 18.8
- 18.9
- 18.98
- 18.99
-
19～19.99
- 19
- 19.00 to 19.99
- 19.01
- 19.02
- 19.03
- 19.05
- 19.1
- 19.2
- 19.25
- 19.3
- 19.4
- 19.45
- 19.5
- 19.55
- 19.6
- 19.6～20.5
- 19.7
- 19.75
- 19.8
- 19.84
- 19.9
- 19.95
- 19.98
- 19.99
-
20～20.9
- 20
- 20.00 to 20.99
- 20.00 to 21.99
- 20~23.9
- 20.01
- 20.02
- 20.03
- 20.1
- 20.2
- 20.24
- 20.25
- 20.3
- 20.4
- 20.5
- 20.6
- 20.6～21.5
- 20.64
- 20.7
- 20.75
- 20.8
- 20.9
-
21～21.9
- 21
- 21.00 to 21.99
- 21.03
- 21.1
- 21.2
- 21.25
- 21.3
- 21.4
- 21.43
- 21.5
- 21.6
- 21.6～22.5
- 21.7
- 21.75
- 21.8
- 21.83
- 21.83 to 24.38
- 21.9
-
22～22.9
- 22
- 22.00 to 22.99
- 22.00 to 23.99
- 22.1
- 22.2
- 22.22
- 22.23
- 22.25
- 22.3
- 22.4
- 22.5
- 22.6
- 22.6～23.5
- 22.62
- 22.7
- 22.75
- 22.8
- 22.9
-
23～23.9
- 23
- 23.00 to 23.99
- 23.02
- 23.1
- 23.2
- 23.25
- 23.3
- 23.4
- 23.42
- 23.5
- 23.6
- 23.6～24.5
- 23.7
- 23.75
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.00 to 24.99
- 24.00 to 25.99
- 24.1
- 24.2
- 24.21
- 24.25
- 24.3
- 24.4
- 24.41 to 35.05
- 24.5
- 24.5/24.7
- 24.5～24.7
- 24.6
- 24.6～25.5
- 24.61
- 24.7
- 24.75
- 24.8
- 24.9
-
25～25.9
- 25
- 25.00 to 25.50
- 25.1
- 25.2
- 25.25
- 25.3
- 25.4
- 25.5
- 25.6
- 25.6～26.5
- 25.7
- 25.75
- 25.8
- 25.9
-
26～26.99
- 26
- 26.00 to 28.99
- 26.1
- 26.19
- 26.2
- 26.25
- 26.3
- 26.4
- 26.5
- 26.5/26.7
- 26.5～26.7
- 26.59
- 26.6
- 26.6～27.5
- 26.7
- 26.75
- 26.8
- 26.9
- 26.99
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.6～28.5
- 27.7
- 27.75
- 27.78
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.25
- 28.3
- 28.4
- 28.5
- 28.57
- 28.6
- 28.6～29.5
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.00 to 31.99
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.6～30.5
- 29.7
- 29.8
- 29.9
-
30～30.8
- 30
- 30.00 to 35.05
- 30.1
- 30.2
- 30.3
- 30.5
- 30.6～31.5
- 30.7
- 30.8
-
31～31.8
- 31
- 31.2
- 31.3
- 31.5
- 31.6～32.0
- 31.7
- 31.75
- 31.8
-
32
-
32～32.8
- 32.00 to 35.00
- 32.2
- 32.3
- 32.5
- 32.7
- 32.8
-
33～33.5
- 33
- 33.5
-
34～34.5
- 34
- 34.36 to 47.80
- 34.5
-
35
-
35.5
-
36～36.91
- 36
- 36~43
- 36.5
- 36.91
-
37～37.7
- 37
- 37.5
- 37.7
-
38
-
38～38.5
- 38.1
- 38.5
-
39～39.5
- 39
- 39.5
-
40～40.5
- 40
- 40.5
-
41
-
41.5
-
42～42.5
- 42
- 42.5
-
43～43.5
- 43
- 43.5
-
44～44.8
- 44
- 44~52
- 44.5
- 44.8
-
45～45.5
- 45
- 45.5
-
46～46.99 to 65.28
- 46
- 46.5
- 46.99 to 65.28
-
47～47.63
- 47
- 47.5
- 47.63
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51～51.5
- 51
- 51.5
-
52～52.5
- 52
- 52.5
-
53～53.5
- 53
- 53~63
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.2
- 55.5
-
56～56.5
- 56
- 56.5
-
57～57.5
- 57
- 57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.5
- 60
- 60.5
-
61～61.5
- 61
- 61.5
-
62～62.5
- 62
- 62.38 to 89.08
- 62.5
-
63～63.5
- 63
- 63.5
-
64～64.5
- 64
- 64.5
-
65～65.5
- 65
- 65.5
-
66～66.5
- 66
- 66.5
-
67～67.5
- 67
- 67.5
-
68～68.5
- 68
- 68.5
-
69～69.5
- 69
- 69.5
-
70～70.5
- 70
- 70.5
-
71～71.5
- 71
- 71.5
-
72～72.5
- 72
- 72.5
-
73～73.5
- 73
- 73.5
-
74～74.5
- 74
- 74.5
-
75
-
76
-
77
-
78
-
79～79.50
- 79
- 79.50
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87～87.76 to 114.48
- 87
- 87.76 to 114.48
-
88
-
89
-
90
-
91
-
92
-
93
-
94～94.50
- 94
- 94.50
-
95～95.50
- 95
- 95.50
-
96
-
97
-
98
-
99
-
100
-
103
-
105
-
110
-
115
-
120
-
143.0
-
-
Overall Length L(mm)
-
Groove Length L(mm)
-
0～0.99
- 0
- 0.015
- 0.025
- 0.04
- 0.05
- 0.06
- 0.075
- 0.08
- 0.09
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.18
- 0.2
- 0.22
- 0.24
- 0.25
- 0.3
- 0.33
- 0.36
- 0.4
- 0.42
- 0.44
- 0.48
- 0.5
- 0.54
- 0.55
- 0.6
- 0.66
- 0.7
- 0.77
- 0.8
- 0.88
- 0.9
- 0.99
-
1～1.98
- 1
- 1,000
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.9
- 1.98
-
2～2.97
- 2
- 2.1
- 2.2
- 2.3
- 2.31
- 2.4
- 2.5
- 2.6
- 2.64
- 2.7
- 2.8
- 2.9
- 2.97
-
3～3.9
- 3
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.7
- 5.8
-
6～6.8
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
-
7～7.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.8
-
8～8.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.8
-
9～9.8
- 9
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.8
-
10～10.8
- 10
- 10..1
- 10.2
- 10.4
- 10.5
- 10.6
- 10.8
-
11～11.8
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
-
12～12.8
- 12
- 12.2
- 12.3
- 12.5
- 12.6
- 12.8
-
13～13.8
- 13
- 13.1
- 13.2
- 13.5
- 13.8
-
14～14.9
- 14
- 14.3
- 14.4
- 14.5
- 14.8
- 14.9
-
15～15.8
- 15
- 15.3
- 15.6
- 15.8
-
16～16.8
- 16
- 16.05
- 16.1
- 16.2
- 16.5
- 16.7
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.8
-
18～18.9
- 18
- 18.5
- 18.6
- 18.8
- 18.9
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.55
- 19.6
- 19.7
- 19.8
-
20～20.7
- 20
- 20.3
- 20.4
- 20.7
-
21～21.8
- 21
- 21.2
- 21.4
- 21.6
- 21.8
-
22～22.8
- 22
- 22.05
- 22.1
- 22.2
- 22.5
- 22.8
-
23～23.9
- 23
- 23.3
- 23.4
- 23.9
-
24～24.8
- 24
- 24.25
- 24.3
- 24.5
- 24.6
- 24.8
-
25～25.8
- 25
- 25.2
- 25.5
- 25.7
- 25.8
-
26～26.6
- 26
- 26.1
- 26.3
- 26.4
- 26.5
- 26.6
-
27～27.8
- 27
- 27.6
- 27.8
-
28～28.8
- 28
- 28.1
- 28.2
- 28.5
- 28.8
-
29～29.5
- 29
- 29.3
- 29.4
- 29.5
-
30～30.8
- 30
- 30.6
- 30.8
-
31～31.8
- 31
- 31.2
- 31.5
- 31.7
- 31.8
-
32～32.8
- 32
- 32.3
- 32.4
- 32.8
-
33～33.8
- 33
- 33.5
- 33.6
- 33.8
-
34～34.8
- 34
- 34.1
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.5
- 35
- 35.3
- 35.4
- 35.5
-
36～36.8
- 36
- 36.5
- 36.8
-
37～37.5
- 37
- 37.5
-
38～38.3
- 38
- 38.3
-
39～39.8
- 39
- 39.8
-
40～40.5
- 40
- 40.5
-
41～41.3
- 41
- 41.3
-
42～42.8
- 42
- 42.8
-
43～43.5
- 43
- 43.2
- 43.5
-
44～44.3
- 44
- 44.3
-
45
-
46～46.5
- 46
- 46.5
-
47
-
48
-
49～49.5
- 49
- 49.5
-
50
-
51
-
52～52.5
- 52
- 52.5
-
53
-
54
-
55～55.5
- 55
- 55.5
-
56
-
57
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60
-
61～61.5
- 61
- 61.5
-
62～62.5
- 62
- 62.5
-
63～63.4
- 63
- 63.4
-
64～64.5
- 64
- 64.5
-
65～65.5
- 65
- 65.5
-
66～66.5
- 66
- 66.5
-
67～67.5
- 67
- 67.1
- 67.5
-
68
-
69～69.5
- 69
- 69.5
-
70～70.5
- 70
- 70.5
-
71～71.7
- 71
- 71.7
-
72
-
73～73.5
- 73
- 73.5
-
74
-
75～75.5
- 75
- 75.5
-
76～76.8
- 76
- 76.5
- 76.8
-
77
-
78
-
79～79.5
- 79
- 79.5
-
80～80.5
- 80
- 80.1
- 80.5
-
81～81.5
- 81
- 81.4
- 81.5
-
82～82.6
- 82
- 82.5
- 82.6
-
83
-
84
-
85～85.5
- 85
- 85.4
- 85.5
-
86～86.5
- 86
- 86.2
- 86.5
-
87
-
88～88.5
- 88
- 88.5
-
89
-
90～90.5
- 90
- 90.1
- 90.5
-
91
-
92～92.5
- 92
- 92.5
-
93
-
94～94.7
- 94
- 94.7
-
95～95.5
- 95
- 95.5
-
96
-
97～97.5
- 97
- 97.5
-
98～98.8
- 98
- 98.8
-
99
-
100～100.5
- 100
- 100.5
-
101
-
102
-
103～103.5
- 103
- 103.4
- 103.5
-
104
-
105～105.5
- 105
- 105.5
-
106
-
107
-
108～108.5
- 108
- 108.4
- 108.5
-
109
-
110～110.5
- 110
- 110.5
-
111
-
112
-
113
-
114～114.5
- 114
- 114.5
-
115～115.5
- 115
- 115.5
-
116
-
117
-
118
-
119～119.5
- 119
- 119.5
-
120～120.5
- 120
- 120.5
-
121
-
122
-
123
-
124～124.5
- 124
- 124.5
-
125～125.5
- 125
- 125.1
- 125.5
-
126
-
127
-
128
-
129～129.6
- 129
- 129.6
-
130
-
131
-
132
-
133～133.5
- 133
- 133.5
-
134
-
135～135.2
- 135
- 135.2
-
136
-
137
-
138
-
140
-
141.5
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150～150.5
- 150
- 150.5
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158～158.5
- 158
- 158.5
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167～167.5
- 167
- 167.5
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175～175.5
- 175
- 175.5
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184～184.5
- 184
- 184.5
-
185
-
186
-
188
-
189
-
190
-
191
-
192～192.1
- 192
- 192.1
-
193
-
194
-
195
-
196
-
197
-
198
-
200～200.6
- 200
- 200.6
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208～208.2
- 208
- 208.2
-
209
-
210
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
230
-
231
-
232
-
234
-
235
-
236
-
238
-
239
-
240
-
242
-
244
-
245
-
246
-
247
-
248
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
270
-
272
-
274
-
275
-
276
-
277
-
278
-
280
-
282
-
285
-
287
-
290
-
292
-
295
-
298
-
300
-
302
-
305
-
310
-
315
-
318
-
320
-
321
-
322
-
323
-
325
-
327
-
330
-
335
-
337
-
340
-
343
-
350
-
355
-
360
-
370
-
372
-
385
-
400
-
402
-
432
-
440
-
450
-
460
-
500
-
512
-
550
-
600
-
692
-
700
-
800
-
860
-
1030
-
-
work material
-
Shank Type
-
Tool Material Type
-
With/without Oil Hole
-
Coating Y/N
- Available
- NA
-
Coating Type
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- GUHRING (56)
- OSG (42)
- NACHI(FUJIKOSHI) (25)
- MAPAL (16)
- 7 LEADERS (4)
- ISCAR (4)
- UNION TOOL (3)
- EIKOSHA (2)
- WIDIN (2)
- DIJET (1)
- SANDVIK (1)
- NIKKENKOSAKU (0)
- RYOCO SEIKI (0)
- OMIKOGYO (0)
- HOZAN (0)
- TRUSCO NAKAYAMA (0)
- SUMITOMO ELECTRIC HARDMETAL (0)
- MARVEL (0)
- NAKANISHI (0)
- DIXI (0)
- KYOWA SEIKO (0)
- ESCO (0)
- OKAZAKI SEIKO (0)
- IWATA TOOL (0)
- BICTOOL (0)
- FUKUDA (0)
- SAITOTWISTDRILL (0)
- ASAHI TOOLS (0)
- ATOM (0)
- BOTEK (0)
- TOYO DRILL (0)
- NS TOOL (0)
- KYOCERA (0)
- THE CUT (0)
- WIDIA (0)
- ISHIHASHI (0)
- NGK SPARK PLUG (0)
CAD
-
- 2D
- 3D
Related Categories to Drill Bits
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy