(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Long Neck Square End Mills (Carbide)
| Days to Ship |
|
|---|
-
![HMS HM Coated 3 to 6 Flute Square [Alteration Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439137.jpg?$product_view_b$)
HMS HM Coated 3 to 6 Flute Square [Alteration Supported Product]
UNION TOOL
[Features]
· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
· Provides unprecedented long life and can be used for both dry and wet applicationsStandard Price: MYR 197.26- Days to Ship: 6 Day(s) or more -
XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model
MISUMI
The long-awaited long-neck type joins the popular XAL Series
- Volume Discount
Days to Ship: 4 Day(s) or more -
![C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439328.jpg?$product_view_b$)
C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]
UNION TOOL
[Features]
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Reasonable price, yet high quality and high performanceStandard Price: MYR 97.30- Days to Ship: 5 Day(s) or more -
AE-VMSS Carbide Anti-Vibration End Mill, Stub Type (Long Neck Type)
OSG
[Features]
· The DUARISE coating offers excellent lubrication, wear resistance and high-temperature oxidation resistance. The composite multilayer structure helps prevent thermal cracking. Also, the smoothing of the coating surface improves machining surface precision.
The positive-angle flute has excellent sharpness and helps reduce cutting resistance. The new flute form achieves both high tool rigidity and a good chip discharge performance, enabling stable machining and reduced burring.
Use of a variable-lead geometry and unequal divisions enables stable, high-efficiency machining.Standard Price: MYR 210.64- Days to Ship: 5 Day(s) or more -
TSC series carbide long neck square end mill, 2-flute / long neck model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Can select optimal body length for processing deep parts of workpiece
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 2 Flutes
Days to Ship: 4 Day(s) or more -
Carbide Long Neck Square End Mill for Aluminum Machining, 2-Flute / Long Neck Model
MISUMI
DLC coated long neck square with both sharpness and durability
- Volume Discount
- DLC
- Aluminum
- 2 Flutes
Days to Ship: 4 Day(s) or more -
Carbide End Mills DLC Coated 2 Flutes Short with Long Neck_DLC-LN-EDS
OSG
Short-blade, long-neck type end mill with ultra-smooth DLC coating. Demonstrates its abilities when used with rolled aluminum alloys, etc., where welding is a problem.
Standard Price: MYR 371.35- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS
OSG
[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications. Multiple variations available.Standard Price: MYR 87.49- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills WXL Coated 4 Flutes Long Neck Short_WXL-LN-EMS
OSG
[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications. Multiple variations available.Standard Price: MYR 132.49- Days to Ship: 5 Day(s) or more -
![C-CES2000, UT Coat, 2-Flute Square [Alteration Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439227.jpg?$product_view_b$)
C-CES2000, UT Coat, 2-Flute Square [Alteration Supported Product]
UNION TOOL
[Features]
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Reasonable price, yet high quality and high performanceStandard Price: MYR 60.22- Days to Ship: 6 Day(s) or more -
NHR-2 Long Neck End Mill (for Deep Ribs)
NS TOOL
Neck relief type suitable for narrow deep processing.
Standard Price: MYR 203.80- Days to Ship: 10 Day(s) or more -
CXS UT Coat 4-Flute Long Neck Square Unequal Split/Unequal Lead
UNION TOOL
[Features]
· Variable split and unequal lead effectively suppress chatter vibration
· Adopts a high-toughness type resistant to chipping with carbides, then further fine-tunes the special ridge shape to enable ultra-high-performance deep cutting like never before
· Provides excellent finished surfaces in both heavy cutting and finishing
· Adopts a low friction coating to realize outstanding chip discharge performance and abrasion resistanceStandard Price: MYR 179.57- Days to Ship: 6 Day(s) or more -
SED2L Long Square End Mill, 2-Flute, Non-Coated
OKAZAKI SEIKO
SED2L, Long Square End Mill, 2-Flute, Uncoated
·The long type allows deep cavity milling.
·Sharp helix angle (45 to 60°)Standard Price: MYR 278.61- Days to Ship: 9 Day(s) -
TSC series carbide long neck square end mill, 4-flute / long neck model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Can select optimal body length for processing deep parts of workpiece
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 4 Flutes
Days to Ship: 4 Day(s) or more -
TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Multi-function square long neck type with high feed capability and excellent durability
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 3 Flutes
Days to Ship: 4 Day(s) or more -
CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Long Neck Model
MISUMI
[Features]
·Long neck shape prevents tool interference during deep cutting (body length can be selected according to machining).
·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges
·CrN coating with excellent lubricity is ideal for copper electrode processing
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- CrN
- Copper
- 2 Flutes
- B (Stub)
Standard Price: MYR 197.41- Days to Ship: 4 Day(s) or more -
Carbide Long Neck Square End Mill for Resin Machining, 2-Flute / Stub, Long Neck Model
MISUMI
End mill for resin that's capable of deep engraving
- Volume Discount
- Non-Coated
- Resin
- 2 Flutes
- B (Stub)
Standard Price: MYR 120.63- Days to Ship: 4 Day(s) or more -
XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model
MISUMI
The price that's only achievable by XAL Series! Introducing the 4-flute long neck
- Volume Discount
Days to Ship: 4 Day(s) or more -
VAC Series Carbide 2-Flute Long Neck Square End Mill
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for deep cutting due to long neck type
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: MYR 103.80- Days to Ship: 4 Day(s) or more -
GS MILL Long Neck, 2-Flute GSN2
NACHI(FUJIKOSHI)
Ideal for fine machining of molds. Available in various sizes and can be used for all kinds of machining.
Standard Price: MYR 168.60- Days to Ship: 5 Day(s) or more -
Long Neck for Copper Work, 2-Flute CURIB
NACHI(FUJIKOSHI)
Ideal for fine processing of copper electrodes. Also suitable for aluminum. Available in various sizes and can be used for all kinds of machining.
Standard Price: MYR 184.63- Days to Ship: 5 Day(s) or more -
GS MILL Long Neck, 4-Flute GSN4
NACHI(FUJIKOSHI)
Ideal for fine machining of molds. Available in various sizes and can be used for all kinds of machining.
Standard Price: MYR 207.50- Days to Ship: 5 Day(s) or more -
OSG
End mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.
Standard Price: MYR 387.22- Days to Ship: 5 Day(s) or more -
ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck_WX-LN-EDS
OSG
Ideal for rib groove machining or machining detailed components when there is a problem with interference, etc. Select the effective length according to the processing.
Standard Price: MYR 202.12- Days to Ship: 5 Day(s) or more -
2-Flute, Long Neck Short Type for Copper / Aluminum Alloy / Plastic, CRN-LN-EDS
OSG
Short blade with long neck shape and high rigidity that enables high efficiency, high precision machining even with large blade exposure. Ideal for high-speed / high-precision machining of copper electrodes.
Standard Price: MYR 371.43- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills DG Coated 4 Flutes Long Neck Short_DG-LN-EMS
OSG
End mill with diamond coating dedicated for graphite.
Standard Price: MYR 778.59- Days to Ship: 5 Day(s) or more -
OSG
End mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.
Standard Price: MYR 416.59- Days to Ship: 5 Day(s) or more -
ULTRA WX Micro Grain Carbide End Mills TiAIN coated 4 Flutes Long Neck Short_WX-LN-EMS
OSG
A long-neck 4-flute end mill that supports processing in narrow and deep spaces. Bottom blade is of a specification that increases the strength of the corner portions.
Standard Price: MYR 262.38- Days to Ship: 5 Day(s) or more -
![HLS2000 HM Coated 2-Flute Long Neck Square [Alteration Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439104.jpg?$product_view_b$)
HLS2000 HM Coated 2-Flute Long Neck Square [Alteration Supported Product]
UNION TOOL
[Features]
· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity, enabling deep rib milling of high-hardness materials
· High Accuracy: O.D. Tolerance: 0/-0.01 (D ≤ 0.15), 0/-0.015 (D ≥ 0.2)
· The refined shape improves the fracture resistance and the synergistic effect with HARDMAX coating ensures long product lifeStandard Price: MYR 99.02- Days to Ship: 5 Day(s) or more -
HLS4000 HM Coated 4-Flute Long Neck Square
UNION TOOL
[Features]
· Unequal division
· θ1 > θ2: Variable split suppresses chatter vibration and tool damage
· θ1 + θ2 = 180°: Easy to measure the outer diameter. 180° counter blade design.
· Circumference back taper: Cutting resistance is reduced by using a back taper, and vertical wall cutting is also stable.
· Adopts the newly developed HARDMAX coating for high-hardness materials that realizes outstanding heat resistance and lubricity
· The 4-flute blade with improved chip discharge performance achieves top-level high feed and machining accuracyStandard Price: MYR 141.40- Days to Ship: 5 Day(s) or more -
![C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439238.jpg?$product_view_b$)
C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]
UNION TOOL
[Features]
· C-CES: 2-flute sharp corner type
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Reasonable price, yet high quality and high performanceStandard Price: MYR 60.22- Days to Ship: 6 Day(s) or more -
![C-CER UT Coat, 2-Flute Deep Rib Square [Alteration Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439294.jpg?$product_view_b$)
C-CER UT Coat, 2-Flute Deep Rib Square [Alteration Supported Product]
UNION TOOL
[Features]
· Ideal for deep grooving thanks to the undercut processing of the main partStandard Price: MYR 116.70- Days to Ship: 5 Day(s) or more -
![C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439339.jpg?$product_view_b$)
C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product]
UNION TOOL
[Features]
· C-CES: 4-flute sharp corner type
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Reasonable price, yet high quality and high performanceStandard Price: MYR 97.30- Days to Ship: 6 Day(s) or more -
![CAS, 2-Flutes Square for Aluminum Processing [Alteration Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439441.jpg?$product_view_b$)
CAS, 2-Flutes Square for Aluminum Processing [Alteration Supported Product]
UNION TOOL
[Features]
· End Mill for Aluminum Machining
· Adopts 45° torsion for a blade shape with excellent sharpness and chip dischargeStandard Price: MYR 102.60- Days to Ship: 5 Day(s) or more -
![AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439452.jpg?$product_view_b$)
AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product]
UNION TOOL
[Features]
· Z-cutting is possible on solid workpieces, reducing pilot hole drilling process time
· Adopts a 45° torsion angle to achieve excellent chip discharge performance
· The blade shape dedicated for aluminum greatly suppresses the generation of burrs
· Tip chipping has been greatly reduced by adopting a micro flat landStandard Price: MYR 173.11- Days to Ship: 6 Day(s) or more -
![CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439496.jpg?$product_view_b$)
CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product]
UNION TOOL
[Features]
· End Mill Dedicated for Graphite Machining
· Adopts a carbide base material with excellent wear resistance
· The shape helps prevent chippingStandard Price: MYR 494.23- Days to Ship: 5 Day(s) or more -
![CPS 2-Flute Square for Resin Machining [Alteration Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439542.jpg?$product_view_b$)
CPS 2-Flute Square for Resin Machining [Alteration Supported Product]
UNION TOOL
[Features]
· Medium Blade Length End Mill for Resin Processing
· Unique blade shape
· Blade Length = 3x Outer Diameter (Some 1.5x/2x)
· An excellent machined surface can be obtained, even for long resin protrusion machiningStandard Price: MYR 113.12- Days to Ship: 6 Day(s) or more -
![CPRL 2-Flute Long Neck, Long Shank Square for Resin Machining [Alteration Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439553.jpg?$product_view_b$)
CPRL 2-Flute Long Neck, Long Shank Square for Resin Machining [Alteration Supported Product]
UNION TOOL
[Features]
· Long Neck / Long Shank Square End Mill for Resin Processing
· Adopts a long shank to support deep groove machining of objects with long projections
· Exhibits excellent sharpness in resin processingStandard Price: MYR 176.69- Days to Ship: 6 Day(s) or more -
![CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439564.jpg?$product_view_b$)
CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product]
UNION TOOL
[Features]
· Long Neck End Mill for Resin Processing
· Ideal for deep grooving thanks to the undercut processing of the neck partStandard Price: MYR 148.41- Days to Ship: 6 Day(s) or more -
![CRN-ES2000, for Copper Electrode Cutting, 2-Flute Square [Alteration Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439643.jpg?$product_view_b$)
CRN-ES2000, for Copper Electrode Cutting, 2-Flute Square [Alteration Supported Product]
UNION TOOL
[Features]
· CrN coating, which is effective in copper cutting, achieves a longer operating life
· The blade design dedicated for copper achieves excellent cutting qualityStandard Price: MYR 94.34- Days to Ship: 5 Day(s) or more -
CRN-ES4000 For Copper Electrode Processing, 4-Flute, Square
UNION TOOL
[Features]
· CrN coating, which is effective in copper cutting, achieves a longer operating life
· The blade design dedicated for copper achieves excellent cutting quality
· O.D. Tolerance: 0/-0.02 (D ≤ 6), 0/-0.03 (D ≥ 8)Standard Price: MYR 136.26- Days to Ship: 6 Day(s) or more -
MHRH230 2-Flute Long Neck End Mill for High-Hardness
NS TOOL
Adopts premium Infinity coating to achieve longer life in machining of materials with high hardness. Also enhances machining accuracy.
Standard Price: MYR 127.58- Days to Ship: 10 Day(s) or more -
MHRH430 4-Flute Long Neck End Mill for High-Hardness
NS TOOL
Adopts premium Infinity coating to achieve longer life in machining of materials with high hardness. Also enhances machining accuracy.
Standard Price: MYR 186.90- Days to Ship: 10 Day(s) -
RSE230 End Mill for Resin Clear Cut
NS TOOL
3x, 5x and 10x blade length, ultra long neck, same diameter type - selectable according to machining shape.
Standard Price: MYR 123.93- Days to Ship: 9 Day(s) or more -
MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing)
NS TOOL
Infinity coating has been adopted for the original deep rib end mill. Neck relief type suitable for narrow deep processing.
Standard Price: MYR 105.91- Days to Ship: 8 Day(s) or more
![HMS HM Coated 3 to 6 Flute Square [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439137.jpg?$product_view_b$)
![C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439328.jpg?$product_view_b$)
![C-CES2000, UT Coat, 2-Flute Square [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439227.jpg?$product_view_b$)
![HLS2000 HM Coated 2-Flute Long Neck Square [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439104.jpg?$product_view_b$)
![C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439238.jpg?$product_view_b$)
![C-CER UT Coat, 2-Flute Deep Rib Square [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439294.jpg?$product_view_b$)
![C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439339.jpg?$product_view_b$)
![CAS, 2-Flutes Square for Aluminum Processing [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439441.jpg?$product_view_b$)
![AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439452.jpg?$product_view_b$)
![CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439496.jpg?$product_view_b$)
![CPS 2-Flute Square for Resin Machining [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439542.jpg?$product_view_b$)
![CPRL 2-Flute Long Neck, Long Shank Square for Resin Machining [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439553.jpg?$product_view_b$)
![CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439564.jpg?$product_view_b$)
![CRN-ES2000, for Copper Electrode Cutting, 2-Flute Square [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439643.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | UNION TOOL | MISUMI | UNION TOOL | OSG | MISUMI | MISUMI | OSG | OSG | OSG | UNION TOOL | NS TOOL | UNION TOOL | OKAZAKI SEIKO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL |
| Product Series | HMS HM Coated 3 to 6 Flute Square [Alteration Supported Product] | XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model | C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product] | AE-VMSS Carbide Anti-Vibration End Mill, Stub Type (Long Neck Type) | TSC series carbide long neck square end mill, 2-flute / long neck model | Carbide Long Neck Square End Mill for Aluminum Machining, 2-Flute / Long Neck Model | Carbide End Mills DLC Coated 2 Flutes Short with Long Neck_DLC-LN-EDS | Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS | Micro Grain Carbide End Mills WXL Coated 4 Flutes Long Neck Short_WXL-LN-EMS | C-CES2000, UT Coat, 2-Flute Square [Alteration Supported Product] | CXS UT Coat 4-Flute Long Neck Square Unequal Split/Unequal Lead | TSC series carbide long neck square end mill, 4-flute / long neck model | TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model | CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Long Neck Model | Carbide Long Neck Square End Mill for Resin Machining, 2-Flute / Stub, Long Neck Model | XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model | ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck_WX-LN-EDS | 2-Flute, Long Neck Short Type for Copper / Aluminum Alloy / Plastic, CRN-LN-EDS | Micro Grain Carbide End Mills DG Coated 4 Flutes Long Neck Short_DG-LN-EMS | ULTRA WX Micro Grain Carbide End Mills TiAIN coated 4 Flutes Long Neck Short_WX-LN-EMS | HLS2000 HM Coated 2-Flute Long Neck Square [Alteration Supported Product] | C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product] | C-CER UT Coat, 2-Flute Deep Rib Square [Alteration Supported Product] | C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product] | CAS, 2-Flutes Square for Aluminum Processing [Alteration Supported Product] | AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product] | CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product] | CPS 2-Flute Square for Resin Machining [Alteration Supported Product] | CPRL 2-Flute Long Neck, Long Shank Square for Resin Machining [Alteration Supported Product] | CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product] | CRN-ES2000, for Copper Electrode Cutting, 2-Flute Square [Alteration Supported Product] | MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing) | |||||||||||||
| Days to Ship | 6 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 10 Day(s) | 9 Day(s) or more | 8 Day(s) or more |
| Specifications |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 1 ～ 12 | 0.1 ～ 6 | 1 ～ 20 | 6 ～ 12 | 0.1 ～ 6 | 0.5 ～ 6 | 0.5 ～ 6 | 0.1 ～ 12 | 1 ～ 10 | 0.1 ～ 20 | 0.5 ～ 5 | 1 ～ 12 | 3 ～ 20 | 1 ～ 6 | 1 ～ 6 | 0.5 ～ 3 | 0.3 ～ 6 | 1 ～ 6 | 0.2 ～ 12 | 0.2 ～ 6 | 0.4 ～ 4 | 1 ～ 10 | 0.5 ～ 2.5 | 0.1 ～ 6 | 0.5 ～ 12 | 1 ～ 6 | 1 ～ 6 | 1 ～ 10 | 0.1 ～ 6 | 1 ～ 6 | 0.2 ～ 12 | 0.2 ～ 6 | 1 ～ 12 | 0.5 ～ 12 | 1 ～ 12 | 2 ～ 20 | 0.3 ～ 12 | 0.5 ～ 4 | 0.5 ～ 6 | 0.2 ～ 12 | 3 ～ 12 | 0.1 ～ 3 | 1 ～ 6 | 0.1 ～ 6 | 0.1 ～ 6 |
| Blade length (ℓ)(mm) | 2.5 ～ 56 | 0.2 ～ 9 | 2.5 ～ 50 | 9 ～ 18 | 0.2 ～ 10 | 1 ～ 12 | 0.7 ～ 9 | 0.15 ～ 18 | 1.5 ～ 15 | 0.15 ～ 48 | 0.7 ～ 7.5 | 1.5 ～ 18 | 15 ～ 80 | 1.5 ～ 10 | 1.5 ～ 13 | 0.7 ～ 4.5 | 0.6 ～ 15 | 1.5 ～ 9 | 0.3 ～ 20 | 0.3 ～ 9 | 0.6 ～ 6 | 1.5 ～ 15 | 0.7 ～ 3.7 | 0.15 ～ 9 | 0.7 ～ 18 | 2 ～ 12 | 1.5 ～ 9 | 1.5 ～ 15 | 0.1 ～ 9 | 1 ～ 6 | 0.3 ～ 36 | 0.3 ～ 9 | 2.5 ～ 26 | 0.75 ～ 30 | 2 ～ 24 | 15 ～ 70 | 0.9 ～ 36 | 1 ～ 8 | 1 ～ 12 | 0.6 ～ 40 | 9 ～ 36 | 0.08 ～ 4.5 | 0.8 ～ 9 | 0.3 ～ 50 | 0.15 ～ 9 |
| Underneck length (ℓ1)(mm) | - | 0.3 ～ 60 | - | 18 ～ 60 | 0.3 ～ 60 | 4 ～ 40 | 2.5 ～ 30 | 0.3 ～ 60 | 4 ～ 80 | - | 2 ～ 40 | 3 ～ 62 | - | 4 ～ 50 | 4 ～ 60 | 2 ～ 40 | 2.5 ～ 52 | 4 ～ 50 | 0.5 ～ 50 | 0.5 ～ 60 | 2 ～ 35 | 4 ～ 80 | 2.5 ～ 12.5 | 0.3 ～ 60 | 2.5 ～ 60 | 5 ～ 60 | 5 ～ 30 | 4 ～ 80 | 0.3 ～ 60 | 4 ～ 50 | - | 0.5 ～ 60 | - | - | 3 ～ 50 | - | - | 4 ～ 40 | 2 ～ 63 | - | - | 0.3 ～ 50 | 4 ～ 50 | 0.8 ～ 80 | 0.3 ～ 60 |
| Shank diameter (d)(mm) | 4 ～ 12 | 4 ～ 6 | 4 ～ 20 | 6 ～ 12 | 4 ～ 6 | 4 ～ 6 | 6 | 4 ～ 12 | 4 ～ 10 | 3 ～ 20 | 3 ～ 6 | 4 ～ 12 | 6 ～ 20 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 3 ～ 6 | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 4 ～ 6 | 4 ～ 10 | 6 | 4 ～ 6 | 6 ～ 12 | 4 ～ 6 | 6 | 4 ～ 10 | 4 ～ 6 | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 3 ～ 20 | 3 ～ 12 | 4 ～ 6 | 3 ～ 6 | 4 ～ 12 | 6 ～ 12 | 4 ～ 6 | 4 ～ 6 | 3 ～ 6 | 4 ～ 6 |
| Number of flutes(sheet) | 3 ～ 6 | 2 | 4 | 4 | 2 | 2 | 2 | 2 | 4 | 2 | 2 | 4 | 2 | 4 | 3 | 2 | 2 | 4 | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 4 | 2 | 2 | 4 | 2 | 3 | 4 | 2 | 2 | 2 | 2 | 4 | 2 | 4 | 2 | 2 |
| Overall Length (L)(mm) | 45 ～ 120 | 50 ～ 100 | 45 ～ 110 | 60 ～ 110 | 40 ～ 100 | 40 ～ 110 | 60 ～ 90 | 45 ～ 140 | 45 ～ 150 | 38 ～ 110 | 35 ～ 90 | 50 ～ 110 | 70 ～ 150 | 40 ～ 100 | 50 ～ 100 | 50 ～ 100 | 50 ～ 80 | 50 ～ 100 | 40 ～ 110 | 45 ～ 120 | 45 ～ 80 | 50 ～ 150 | 60 | 45 ～ 120 | 60 ～ 140 | 50 ～ 100 | 60 ～ 90 | 45 ～ 150 | 45 ～ 120 | 50 ～ 110 | 45 ～ 90 | 45 ～ 120 | 45 ～ 75 | 45 ～ 90 | 60 ～ 110 | 60 ～ 200 | 45 ～ 100 | 80 ～ 100 | 38 ～ 120 | 40 ～ 100 | 50 ～ 100 | 45 ～ 100 | 50 ～ 110 | 45 ～ 130 | 45 ～ 120 |
| work material | Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[○/◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○/◎] / Titanium[○] / Copper[○/◎] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[○] / Copper[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | Aluminum[◎] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[○] / Graphite[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[○] / Copper[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] |
| Torsion Angle (θ) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Variable lead | Standard torsion (30-40°) / Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) / Powerful Torsion (45°-60°) | Standard torsion (30-40°) / IKOU | Standard torsion (30-40°) | Standard torsion (30-40°) / Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | - | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Machining Application | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts |
| Coating | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | TiCN | - | For High Hardness (Silicon Group) | DLC | DLC | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiCN | Non-Coated | For General Steels (AlCrN, etc.) | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | CrN | Non-Coated | For General Steels (AlCrN, etc.) | - | TiAlN | CrN | TiAlN | TiAlN | TiAlN | CrN | DG | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiCN | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | CrN | CrN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | TiAlN |
| Blade tip shape | With Lead | Sharp Edge / With Lead | With Lead | - | Sharp Edge / With Lead | Sharp Edge | With Lead | Sharp Edge / With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge / With Lead | With Lead | Sharp Edge | Sharp Edge | Sharp Edge / With Lead | - | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | With Lead | Sharp Edge / With Lead | With Lead | With Lead | With Lead | Sharp Edge | With Lead | Sharp Edge | With Lead | With Lead | Sharp Edge | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge | Sharp Edge | With Lead | With Lead | Sharp Edge | With Lead |
| Type | Square | Long-Neck Square | Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Square | Long-Neck Square | Square | Square | Long-Neck Square | Square | Square | Long-Neck Square | Long-Neck Square | Square | Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Long-Neck Square |
![HMS HM Coated 3 to 6 Flute Square [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439137.jpg?$product_view_c$)
![C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439328.jpg?$product_view_c$)
![C-CES2000, UT Coat, 2-Flute Square [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439227.jpg?$product_view_c$)
![HLS2000 HM Coated 2-Flute Long Neck Square [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439104.jpg?$product_view_c$)
![C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439238.jpg?$product_view_c$)
![C-CER UT Coat, 2-Flute Deep Rib Square [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439294.jpg?$product_view_c$)
![C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439339.jpg?$product_view_c$)
![CAS, 2-Flutes Square for Aluminum Processing [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439441.jpg?$product_view_c$)
![AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439452.jpg?$product_view_c$)
![CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439496.jpg?$product_view_c$)
![CPS 2-Flute Square for Resin Machining [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439542.jpg?$product_view_c$)
![CPRL 2-Flute Long Neck, Long Shank Square for Resin Machining [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439553.jpg?$product_view_c$)
![CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439564.jpg?$product_view_c$)
![CRN-ES2000, for Copper Electrode Cutting, 2-Flute Square [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439643.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.1～0.95
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
-
1～1.95
- 1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.5
- 10
- 10.5
-
11～11.5
- 11
- 11.5
-
12
-
14
-
16
-
18
-
20
-
25
-
30
-
32
-
35
-
40
-
45
-
50
-
-
Blade length (ℓ)(mm)
-
0.08～0.9
- 0.08
- 0.1
- 0.12
- 0.15
- 0.2
- 0.25
- 0.3
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.8
- 2
- 2.1
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 2.8
-
3～3.8
- 3
- 3.2
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
-
4～4.8
- 4
- 4.5
- 4.8
-
5～5.5
- 5
- 5.25
- 5.3
- 5.4
- 5.5
-
6～6.25
- 6
- 6.25
-
7～7.5
- 7
- 7.2
- 7.5
-
8
-
9
-
10
-
11
-
12～12.5
- 12
- 12.5
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
24
-
25
-
26
-
30
-
32
-
35
-
36
-
38
-
40
-
45
-
46
-
48
-
50
-
55
-
56
-
60
-
64
-
65
-
70
-
75
-
80
-
85
-
100
-
115
-
125
-
130
-
150
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Torsion Angle (θ)
-
Machining Application
-
Coating
-
Blade tip shape
-
Type
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Long Neck Square End Mills (Carbide)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy