(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Long Neck Ball End Mills (Carbide)
| Days to Ship |
|
|---|
-
HM Coated 2-flute, Long Neck Ball HSLB
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflectionStandard Price: MYR 100.50- Days to Ship: 5 Day(s) or more -
CBN-LBF 2-Flute High Grade Long-Neck Ball
UNION TOOL
[Features]
· Uses CBN materials (ideal for machining high hardness materials) and features an improved blade shape for high precision and a long service life.
· Excellent abrasion and chipping resistance, ensuring a good machining surface roughness and precision, even when machining for long periods.
· Shank diameter tolerance: 0/-0.004 mm
· Ball radius accuracy: With nominal radius as a base ±0.003 mmStandard Price: MYR 782.33- Days to Ship: 5 Day(s) or more -
TSC series carbide long neck ball end mill, 2-flute / long neck model
MISUMI
[Features]
·Long neck shape suitable for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Days to Ship: 4 Day(s) or more -
Long Neck Ball Type, 2-Flute WXL-LN-EBD
OSG
The hard lubricant film WXL coating is effective for a wide range of processing, from mold materials to copper electrodes.
Standard Price: MYR 101.02- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute WX-LN-EBD
OSG
A long neck ball where the effective length can be selected to suit the machining shape. The high toughness carbide base material achieves stable cutting for a wide range of processing.
Standard Price: MYR 209.97- Days to Ship: 5 Day(s) or more -
Carbide 2-Flute Ultra Long Ball End Mill 30° B246X
7 LEADERS
[Features]
· 2-flute ultra-long shank ball end mill that supports a wide range of work materials.
· Capable of continuous stable cutting.
· Nanoparticle multilayer coating.
· Suitable for a wide range of work materials from general steel to high hardness steel.Standard Price: MYR 301.49- Days to Ship: 7 Day(s) or more -
TOYO DRILL
[Features]
· The specially-designed unique tooth shape enables high speed rotation and a high feed rate.
· Uses a special-blend ultra-fine particle carbide alloy for drastically improved toughness and bending strength.
· High rigidity, excellent wear-resistance, chatter-resistance and chipping resistance, making it particularly effective for high precision and high-efficiency machining.Standard Price: MYR 1,467.02- Days to Ship: 8 Day(s) or more -
Long-Neck Ball End Mill For Copper Electrodes DRB230
NS TOOL
[Features]
· A long-neck ball end mill with an exceptionally long tool life, offering high quality when machining copper electrodes.Standard Price: MYR 281.29- Days to Ship: 10 Day(s) or more -
TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model
MISUMI
A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge
- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model
MISUMI
[Features]
·High stiffness 2-flute type with length taper shape
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Standard Price: MYR 172.60- Days to Ship: 4 Day(s) or more -
TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model
MISUMI
[Features]
·High-feed, high stiffness 3-flute taper shape with taper length
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
Days to Ship: 4 Day(s) or more -
TSC series carbide long neck ball end mill, 3-flute / long neck model
MISUMI
[Features]
·Long neck ball 3-flute type suitable for high-feed machining of deep cutting areas
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
Days to Ship: 4 Day(s) or more -
TSC series carbide long neck ball end mill, 4-flute / long neck model
MISUMI
[Features]
·Long neck ball 4-flute type suitable for high-feed machining of deep cutting areas
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
Days to Ship: 4 Day(s) or more -
TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model
MISUMI
[Features]
·3-flute, short-flute length shape is used to resist chattering and enable high-feed machining
·Taper neck is effective in suppressing chattering
·Machining of high hardness steel up to 65HRC is possible
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
Standard Price: MYR 250.29- Days to Ship: 4 Day(s) or more -
MISUMI
CrN coated products that are ideal for copper electrode processing are available at affordable prices
- Volume Discount
- CrN
- Copper
- 2 Flutes
Standard Price: MYR 172.58- Days to Ship: 4 Day(s) or more -
MISUMI
Astonishingly inexpensive! Unprecedented price reduction on the premium diamond coated products!
- Volume Discount
- DIA
- Graphite
- 2 Flutes
Standard Price: MYR 368.04- Days to Ship: 4 Day(s) or more -
XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model
MISUMI
A significant number of specifications has been added to the XAL series that can be widely used for everything from general steel to copper
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Days to Ship: 2 Day(s) or more -
MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model
MISUMI
High-performance MRC series is available in the industry's largest number of sizes
- Volume Discount
- MR
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
Long Neck for Copper Work, Ball CURIBR
NACHI(FUJIKOSHI)
Ideal for fine processing of copper electrodes. Available in various sizes and can be used for all kinds of machining.
Standard Price: MYR 230.63- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute for Copper /Aluminum Alloy / Plastic CRN-LN-EBD
OSG
Also ideal for copper electrode machining that requires large protrusions as it has a short blade and long neck shape with high rigidity.
Standard Price: MYR 495.51- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute for Graphite DG-LN-EBD
OSG
End mill with diamond coating dedicated for graphite.
Standard Price: MYR 846.11- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute CBN-LN-SXB
OSG
2-Flute Long Neck Ball End Type CBN-LN-SXB
·Achieves deep cut milling even with small diameters. Good cutting quality.
With the effect of spiral gash, both cutting edge strength and sharpness are achieved.
·CBN sintered body is used for the flute material.Standard Price: MYR 871.43- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute CRN-LN-EBD-4
OSG
In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.
Standard Price: MYR 382.14- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute DLC-LN-EBD
OSG
Ultra-smooth DLC coating prevents welding adhesion. Achieves high speed in shape machining of aluminum alloys, while also obtaining a smooth surface finish.
Standard Price: MYR 487.40- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute WXL-HS-LN-EBD
OSG
WXL coating has excellent lubrication and resistance to wear. Can be used for a wide range of work materials and cutting areas
Standard Price: MYR 133.51- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute FX-LN-EBD-6
OSG
Ball end mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.
Standard Price: MYR 602.44- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute for High Hardness WXS-LN-EBD
OSG
Ultra-heat-resistant, ultra-hard WX super coated long neck ball. The effective length can be selected to suit the machining shape.
Standard Price: MYR 115.75- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 4-Flute for Graphite DG-LN-EBM
OSG
End mill with diamond coating dedicated for graphite.
Standard Price: MYR 846.11 Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute DIA-LN-EBD
OSG
Long neck shaped ball end mill with ultra-microcrystalline diamond coating. Excellent durability in graphite machining. Also effective for copper and aluminum alloys.
Standard Price: MYR 1,230.14- Days to Ship: 5 Day(s) or more -
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflectionStandard Price: MYR 102.60- Days to Ship: 5 Day(s) or more -
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_b$)
HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflectionStandard Price: MYR 113.12- Days to Ship: 7 Day(s) or more -
HBL, HM Coated 2-Flute Long Shank Ball
UNION TOOL
[Features]
· Long Shank Ball End Middle Series Supporting High-Hardness Materials
· Uses HardMax coating compatible with high-speed machining of high-hardness materials
· Capable of stable, long-life machining for both dry and wet typeStandard Price: MYR 408.93- Days to Ship: 5 Day(s) or more -
HLB, HM Coat, 2-Flute Long Neck Ball End Mill
UNION TOOL
[Features]
· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
· Provides unprecedented long life and can be used for both dry and wet applicationsStandard Price: MYR 109.61- Days to Ship: 6 Day(s) or more -
HFB, HM Coated 4-Flute High-Efficiency Short Shank Ball
UNION TOOL
[Features]
· Supports Shrink Fit Holders
· Suppresses unnecessary tool protrusion to enable higher precision processing
· Reduces processes in cutting
· Increases machining efficiency through combination with shrink fit holder.Standard Price: MYR 203.10- Days to Ship: 5 Day(s) or more -
![HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439182.jpg?$product_view_b$)
HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]
UNION TOOL
[Features]
· Significantly enhances machining efficiency.
· The chip discharge capacity is up to 27 times higher (compared to the manufacturer's previous product)
· With the newly developed ball tip shape, the bottom surface is treated with non-polish processing
· Reasonable price setting
· Has 4 flutes but is still cheaper than 3-flute types from other companiesStandard Price: MYR 197.80- Days to Ship: 6 Day(s) or more -
HTNB HM coat 2-flute taper neck ball end mill
UNION TOOL
[Features]
· High rigidity realized through an improved taper neck shape.
· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity
· 65 HRC high hardness materials can also be cutStandard Price: MYR 222.50- Days to Ship: 5 Day(s) or more -
DIA Coated Series, for Graphite Processing, DCB, 2-Flute Ball
UNION TOOL
[Features]
· 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing
· The newly developed diamond coating film achieves outstanding wear resistance
· Adopts a highly adhesive coating film for longer product lifeStandard Price: MYR 560.03- Days to Ship: 5 Day(s) or more -
DIA Coated Series, for Graphite Processing, DCLB, 2-Flute Long Neck Ball End Mill
UNION TOOL
[Features]
· 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing
· The newly developed diamond coating film achieves outstanding wear resistance
· Adopts a highly adhesive coating film for longer product lifeStandard Price: MYR 382.44- Days to Ship: 6 Day(s) or more -
![CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439485.jpg?$product_view_b$)
CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]
UNION TOOL
[Features]
· An end mill dedicated for graphite machining.
· Adopts a carbide base material with excellent wear resistance.Standard Price: MYR 323.70- Days to Ship: 5 Day(s) or more -
CGB4000 4-Flute Ball for Graphite Processing
UNION TOOL
[Features]
· An end mill dedicated for graphite machining.
· Adopts a carbide base material with excellent wear resistance.Standard Price: MYR 644.12- Days to Ship: 6 Day(s) or more -
CPRB 2-Flute Long Neck Ball End Mill for Resin Machining
UNION TOOL
[Features]
· Long Neck Ball End Mill for Resin Processing
· Ideal for deep grooving thanks to the undercut processing of the neck partStandard Price: MYR 180.20- Days to Ship: 5 Day(s) or more -
![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](//pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_b$)
CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]
UNION TOOL
[Features]
· 3-flute type achieves remarkably high feed. Shortens the roughing time
· Deep cutting is possible, enabling high efficiency machining even with shape processing where feeding speed cannot be increased
· Designed with 3-flute variable split to suppress chatter.
· It uses UTCOAT and can support a wide range from raw materials through low/medium hardness materials up to 55 HRC
· Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip shape (excluding R0.75 and below)Standard Price: MYR 191.74- Days to Ship: 5 Day(s) or more -
SSBL200 CBN Super Speed Long Neck Ball End Mill
NS TOOL
Effective length up to 10 mm. Supports deeper machining compared with conventional CBN tools
Standard Price: MYR 942.34- Days to Ship: 8 Day(s) or more -
MRBH230 Long-Neck Ball, Hard (for High Hardness)
NS TOOL
The Infinity Coating Premium for high hardness and unique new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface
Standard Price: MYR 123.93- Days to Ship: 5 Day(s) or more -
RSB230 Ball-End Mill for Resin Clear Cut
NS TOOL
3x, 5x and 10x blade length, ultra long neck, same diameter type - selectable according to machining shape.
Standard Price: MYR 160.26- Days to Ship: 10 Day(s)
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_b$)
![HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439182.jpg?$product_view_b$)
![CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439485.jpg?$product_view_b$)
![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | UNION TOOL | UNION TOOL | MISUMI | OSG | OSG | 7 LEADERS | TOYO DRILL | NS TOOL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | NS TOOL |
| Product Series | TSC series carbide long neck ball end mill, 2-flute / long neck model | TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model | TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model | TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model | TSC series carbide long neck ball end mill, 3-flute / long neck model | TSC series carbide long neck ball end mill, 4-flute / long neck model | TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model | XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model | MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model | Long Neck Ball Type, 2-Flute for Copper /Aluminum Alloy / Plastic CRN-LN-EBD | HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product] | HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product] | DIA Coated Series, for Graphite Processing, DCB, 2-Flute Ball | DIA Coated Series, for Graphite Processing, DCLB, 2-Flute Long Neck Ball End Mill | CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product] | CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product] | |||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 10 Day(s) |
| Specifications |
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||
| R Size(mm) | 0.05 ～ 3 | 0.15 ～ 0.5 | 0.05 ～ 3 | 0.05 ～ 3 | 0.1 ～ 3 | 1 ～ 6 | 4 ～ 5 | 0.05 ～ 3 | 0.5 ～ 5 | 0.15 ～ 5 | 0.5 ～ 3 | 0.5 ～ 3 | 1 ～ 3 | 0.5 ～ 3 | 0.2 ～ 2 | 0.2 ～ 3 | 0.05 ～ 3 | 0.05 ～ 3 | 0.1 ～ 3 | 0.5 ～ 2.5 | 0.2 ～ 2 | 0.2 ～ 1.5 | 0.1 ～ 1 | 0.5 ～ 2 | 0.3 ～ 1.5 | 0.25 ～ 3 | 0.1 ～ 3 | 1 ～ 1.5 | 0.5 ～ 2.5 | 0.03 ～ 6 | 0.1 ～ 0.75 | 1.5 ～ 6 | 0.4 ～ 3 | 1 ～ 6 | 1 ～ 6 | 0.1 ～ 2 | 0.5 ～ 6 | 0.2 ～ 3 | 0.2 ～ 6 | 2 ～ 10 | 0.2 ～ 3 | 0.3 ～ 6 | 0.05 ～ 1 | 0.05 ～ 3 | 0.1 ～ 3 |
| Blade length (ℓ)(mm) | 0.08 ～ 4.8 | 0.16 ～ 0.7 | 0.07 ～ 8 | 0.08 ～ 6 | 0.16 ～ 4.8 | 4 ～ 22 | 16 ～ 24 | 0.15 ～ 6 | - | 0.3 ～ 8 | 0.8 ～ 6 | 0.8 ～ 4.8 | 1.6 ～ 6 | 0.8 ～ 4.8 | 0.4 ～ 4 | 0.6 ～ 7.5 | 0.07 ～ 12 | 0.07 ～ 8 | 0.2 ～ 6 | 1.5 ～ 7.5 | 0.6 ～ 6 | 0.3 ～ 1.8 | 0.16 ～ 1.6 | 1.5 ～ 6 | 0.5 ～ 2.4 | 0.5 ～ 6 | 0.16 ～ 4.8 | 3 ～ 4.5 | 1.5 ～ 7.5 | 0.06 ～ 22 | 0.3 ～ 2.5 | 4.5 ～ 25 | 0.64 ～ 4.8 | 3 ～ 18 | 3 ～ 18 | 0.16 ～ 50 | 5 ～ 55 | 0.32 ～ 6 | 0.8 ～ 55 | 20 ～ 60 | 0.4 ～ 6 | 0.9 ～ 18 | 0.08 ～ 1.2 | 0.07 ～ 6 | 0.6 ～ 30 |
| Underneck length (ℓ1)(mm) | 0.3 ～ 60 | 0.9 ～ 10 | 0.2 ～ 60 | 0.3 ～ 50 | 0.5 ～ 50 | - | - | - | 4 ～ 55 | 2 ～ 60 | 7 ～ 60 | 3 ～ 50 | 4 ～ 30 | 20 ～ 50 | 2 ～ 40 | 2 ～ 60 | 0.2 ～ 60 | 0.2 ～ 60 | 0.5 ～ 35 | 3 ～ 40 | 4 ～ 60 | 2 ～ 15 | 1 ～ 30 | 5 ～ 20 | 1.5 ～ 12 | 2.5 ～ 30 | 0.5 ～ 40 | 10 ～ 20 | 5 ～ 50 | - | - | - | 3 ～ 30 | - | - | 1.5 ～ 62 | - | 2 ～ 80 | - | - | 1 ～ 50 | - | 0.3 ～ 10 | 0.2 ～ 50 | 2 ～ 80 |
| Shank diameter (d)(mm) | 3 ～ 6 | 4 | 3 ～ 8 | 3 ～ 6 | 4 ～ 6 | 3 ～ 12 | 8 ～ 10 | 4 ～ 6 | 6 ～ 10 | 4 ～ 12 | 4 ～ 8 | 4 ～ 6 | 4 ～ 6 | 4 ～ 8 | 4 ～ 6 | 4 ～ 6 | 3 ～ 6 | 4 ～ 6 | 4 ～ 6 | 6 | 4 | 4 ～ 6 | 4 | 6 | 4 | 6 | 4 ～ 6 | 4 | 6 | 4 ～ 12 | 4 | 3 ～ 12 | 4 ～ 6 | 4 ～ 12 | 4 ～ 12 | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 4 ～ 12 | 4 ～ 20 | 4 ～ 6 | 4 ～ 12 | 4 | 4 ～ 6 | 3 ～ 6 |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 2 | 2 | - | 2 | 2 | 3 | 2 ～ 3 | 4 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 2 | 2 | 2 | 2 | 4 | 2 | 3 | 2 | 2 | 2 |
| Overall Length (L)(mm) | 45 ～ 120 | 50 | 40 ～ 110 | 45 ～ 120 | 45 ～ 120 | 100 ～ 210 | 160 ～ 180 | 45 ～ 100 | 70 ～ 90 | 50 ～ 110 | 50 ～ 110 | 50 ～ 110 | 50 ～ 70 | 70 ～ 110 | 50 ～ 110 | 50 ～ 110 | 40 ～ 110 | 50 ～ 110 | 45 ～ 80 | 60 ～ 90 | 50 ～ 100 | 45 ～ 50 | 45 ～ 70 | 60 ～ 80 | 35 ～ 40 | 60 ～ 90 | 45 ～ 90 | 50 ～ 60 | 60 ～ 100 | 50 ～ 110 | 50 | 80 ～ 200 | 45 ～ 80 | 40 ～ 60 | 50 ～ 110 | 4 ～ 120 | 60 ～ 180 | 45 ～ 120 | 60 ～ 200 | 100 ～ 250 | 45 ～ 120 | 50 ～ 120 | 50 ～ 53 | 45 ～ 120 | 50 ～ 130 |
| work material | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | Aluminum[◎] / Copper[◎] | Aluminum[○] / Copper[◎] / Resin[○] | Aluminum[○] / Graphite[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | Aluminum[○] / Copper[◎] / Resin[○] | Aluminum[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] / Graphite[◎] / Resin[◎] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[○] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○/◎] / High Hardness Steel-HRC60[○/◎] / High Hardness Steel-HRC65[○/◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○/◎] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] |
| R Precision(μm) | -0.005～0.005 ～ -0.002～0.002 | ±3 | -0.007 ~ +0.003 ～ ±0.005 | -0.005～+0.005 | -0.01～+0.01 | ±10 | - | ±2 ～ ±3 | ±0.01 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | ±0.005 | ±0.01 | -0.007 ~ +0.003 ～ ±0.005 | ±0.005 | -0.007～+0.003 | -0.01～+0.01 | -0.01～+0.01 ～ -0.008～+0.008 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.005～+0.005 | -0.005～+0.005 | -0.005～+0.005 | -0.015～+0.015 | - | -0.007～0.007 ～ -0.002～0.002 | -0.005～0.005 | -0.007～0.007 ～ -0.005～0.005 | -0.002～0.002 | -0.01～0.01 ～ -0.005～0.005 | -0.01～0.01 ～ -0.005～0.005 | -0.005～0.005 | -0.01～0.01 | -0.01～0.01 | -0.01～0.01 | -0.01～0.01 | -0.01～0.01 | -0.01～0.01 ～ -0.005～0.005 | 0.005～-0.005 | 0.005～-0.005 | 0.005～-0.005 ～ 0.01～-0.01 |
| Machining Application | Curved surface / Side / Engraving / R Groove | - | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Engraving / R Groove | - | Curved surface | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / R Groove |
| Coating | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | TiAlN | - | Non-Coated | DLC | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | CrN | Dia Coat | For General Steels (AlCrN, etc.) | MRC | CrN | CrN | DG | Non-Coated | CrN | DLC | For General Steels (AlCrN, etc.) | TiAlN | For High Hardness (Silicon Group) | DG | Dia Coat | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.) | Dia Coat | Dia Coat | Non-Coated | Non-Coated | Non-Coated | TiCN | Non-Coated | For High Hardness (Silicon Group) | Non-Coated |
| Type | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball / Spherical Ball | Tapered neck ball | Tapered neck ball | Long-Neck Ball | Long-Neck Ball | Tapered neck ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Ball | Ball | Ball | Long-Neck Ball | Ball | Ball | Tapered neck ball | Ball | Long-Neck Ball | Ball | Ball | Long-Neck Ball | Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball |
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_c$)
![HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439182.jpg?$product_view_c$)
![CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439485.jpg?$product_view_c$)
![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](http://pre-my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
R Size(mm)
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- 0.1
- R0.1
- 0.15
- R0.15
- 0.2
- R0.2
- 0.25
- R0.25
- 0.3
- R0.3
- 0.35
- R0.35
- 0.4
- R0.4
- 0.45
- R0.45
- 0.5
- R0.5
- 0.55
- R0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- R0.7
- 0.75
- R0.75
- 0.8
- R0.8
- 0.85
- R0.85
- 0.9
- R0.9
- 0.95
- R0.95
- 1
- R1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- R1.75
- 1.8
- 1.9
- 2
- R2
- 2.15
- 2.2
- 2.25
- R2.25
- 2.3
- 2.4
- 2.5
- R2.5
- 2.75
- R2.75
- 3
- R3
- 3.25
- R3.25
- 3.5
- R3.5
- 3.75
- R3.75
- 4
- R4
- 4.25
- R4.25
- 4.5
- R4.5
- 4.75
- 5
- R5
- 5.25
- 5.5
- R5.5
- 5.75
- 6
- R6
- 8
- 10
-
Blade length (ℓ)(mm)
-
0.06～0.96
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.2
- 0.21
- 0.23
- 0.24
- 0.28
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.42
- 0.45
- 0.48
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
-
1～1.9
- 1
- 1.05
- 1.1
- 1.12
- 1.2
- 1.28
- 1.3
- 1.4
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 2.8
- 2.9
-
3～3.85
- 3
- 3.2
- 3.5
- 3.7
- 3.75
- 3.85
-
4～4.8
- 4
- 4.2
- 4.5
- 4.8
-
5～5.3
- 5
- 5.2
- 5.3
-
6～6.7
- 6
- 6.7
-
7～7.5
- 7
- 7.5
-
8～8.2
- 8
- 8.2
-
9～9.7
- 9
- 9.7
-
10～10.5
- 10
- 10.5
-
11～11.2
- 11
- 11.2
-
12～12.7
- 12
- 12.7
-
13～13.5
- 13
- 13.5
-
14
-
15
-
16～16.5
- 16
- 16.5
-
18
-
20
-
22
-
24
-
25
-
30
-
35
-
38
-
40
-
45
-
50
-
55
-
60
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
R Precision(μm)
-
Machining Application
-
Coating
-
Type
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Long Neck Ball End Mills (Carbide)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy