(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
SANDVIK Holding Tools for O.D. Tuning（Page3）
| Days to Ship |
|
|---|
-
Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR/L -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Standard Price: MYR 1,262.61- Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CDJNR/L -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Standard Price: MYR 1,279.75- Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSDNN -2
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Standard Price: MYR 1,279.75 Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR/L -2
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Standard Price: MYR 1,279.75 Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR/L -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Standard Price: MYR 1,279.75 Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSRNR/L -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Standard Price: MYR 1,279.75 Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR/L -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Standard Price: MYR 1,279.75 Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PDUNR/L-HP
SANDVIK
Excellent chip control and process stability for best part quality
Accurate high-precision coolant supply controls chip control and provides stable machiningStandard Price: MYR 3,812.28 Days to Ship: 10 Day(s) -
SANDVIK
Sandvik Outer Diameter Holder Outer Diameter/Negative/Chip Bite CoroTurn HP Cutting Head C-PDJNR/L-15HP
Standard Price: MYR 2,755.45- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, C-PCRNR/L-HP
SANDVIK
Excellent chip control and process stability for best part quality
Accurate high-precision coolant supply controls chip control and provides stable machiningStandard Price: MYR 3,519.01 Days to Ship: 10 Day(s) -
SANDVIK
Excellent chip control and process stability for best part quality
Accurate high-precision coolant supply controls chip control and provides stable machiningStandard Price: MYR 3,519.01- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DDHNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,812.66- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DDJNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,812.66- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DDNNN
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
SANDVIK
Sandvik Outer Diameter Holder Outer Diameter/Negative/Chip Bite Coromant Capto Cutting Head C-DDUNR/L
Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DRSNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DSDNN
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DSKNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DSRNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DSSNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DVJNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,812.66- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DVVNN
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DWLNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,812.66- Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSKNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 2,342.85- Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSRNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 2,048.80- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, MTJNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, MWLNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, PCRNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 2,018.95- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, PDJNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 2,119.87- Days to Ship: 10 Day(s) -
Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PRDCN-25 A
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 2,342.85- Days to Ship: 10 Day(s) -
Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PSDNN-50/60/80
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, PSSNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Outer-Diameter Turning, Shank Tool Bit For Negative Inserts, T-Max P Lever Clamp, PDJNR/L
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 676.59- Days to Ship: 5 Day(s) or more -
SANDVIK
Outer Dia Turning, Negative[Application]
Outer Diameter
[Specification]
Applicable Tip Shape: C (80° Diamond-Shape)
Clamp Shape: Cable clamp
Selfishly: Left-hand
Applicable Tip Clearance Angle Type: Negative
Shank height(mm): 32
Shank width(mm): 32
Lead Angle(°): 15
Cutting Angle(°): 75
Clearance angle(°): 0
Function Width(mm): 27
Function Height(mm): 32
Shank width(B): 32mm
Shank height(H): 32mm
[Material]
SteelStandard Price: MYR 1,494.40 Days to Ship: 10 Day(s) -
SANDVIK
Sandvik External Holder External Turning - Negative Insert Bit Shank Bit CoroTurn RC Double Clamp DCLNR/L
Standard Price: MYR 719.21- Days to Ship: 10 Day(s) -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDJNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 801.85- Days to Ship: 10 Day(s) -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDNNN
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 801.85- Days to Ship: 8 Day(s) or more -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DRSNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 833.98- Days to Ship: 10 Day(s) -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 714.56- Days to Ship: 10 Day(s) or more -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSDNN
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 719.21- Days to Ship: 10 Day(s) -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTFNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 801.85- Days to Ship: 10 Day(s) -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTGNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 801.85- Days to Ship: 10 Day(s) -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 719.21- Days to Ship: 10 Day(s) -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVJNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 1,348.08- Days to Ship: 10 Day(s) -
SANDVIK
Sandvik External Holder External Turning - Negative Insert Bit Shank Bit CoroTurn RC Double Clamp DVPNR/L
Standard Price: MYR 997.68- Days to Ship: 10 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Applicable Tip Shape |
| Applicable Chip Clearance Angle |
| Selfishly |
| Application |
| Clamp Shape |
| Shank height(mm) |
| Shank width(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR/L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CDJNR/L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSDNN -2 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR/L -2 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR/L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSRNR/L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR/L -4 | Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PDUNR/L-HP | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSKNR/L | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSRNR/L | Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PRDCN-25 A | Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PSDNN-50/60/80 | Outer-Diameter Turning, Shank Tool Bit For Negative Inserts, T-Max P Lever Clamp, PDJNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDJNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDNNN | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DRSNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSDNN | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTFNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTGNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVJNR/L | |||||||||||||||||||||||
| Days to Ship | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 5 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 8 Day(s) or more | 10 Day(s) | 10 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) |
| Applicable Tip Shape | C (80° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | S (Rectangular) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | R (Circular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | W (Hexagonal Type) | S (Rectangular) | S (Rectangular) | T (Triangle) | W (Hexagonal Type) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | R (Circular) | S (Rectangular) | S (Rectangular) | D (55° Diamond-Shape) | - | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | R (Circular) | S (Rectangular) | S (Rectangular) | T (Triangle) | T (Triangle) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) |
| Applicable Chip Clearance Angle | - | - | - | - | - | - | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative |
| Selfishly | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand / Left-hand | Left-hand | - | Right-hand / Left-hand | Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand |
| Application | Outer Diameter / End Face / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / Post-Grinding | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter | Outer Diameter / Profiling / Chamfer | Outer Diameter | Outer Diameter / End Face / Post-Grinding | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Chamfer / Post-Grinding | End Face | Outer Diameter / End Face / Profiling | Outer Diameter / Post-Grinding | Outer Diameter / End Face | Outer Diameter | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling / Post-Grinding | Outer Diameter / End Face | End Face | Outer Diameter | Outer Diameter / Profiling / Chamfer | Outer Diameter / End Face | Outer Diameter | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling | Outer Diameter | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer | - | Outer Diameter / End Face / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / Chamfer / Post-Grinding | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter | Outer Diameter / Post-Grinding | End Face | Outer Diameter | Outer Diameter | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer |
| Clamp Shape | Clamp-on | Clamp-on | Cable clamp | Cable clamp | Clamp-on | Clamp-on | Clamp-on | Pin Lock | Pin Lock | Pin Lock | Pin Lock | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Pin Lock | Pin Lock | Double Clamp | Double Clamp | Pin Lock | Pin Lock | Pin Lock | Pin Lock | Pin Lock | Lever lock | - | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp |
| Shank height(mm) | 25 ～ 32 | 32 | - | - | - | 32 | 32 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 20 | - | 40 ～ 50 | 20 | 20 ～ 32 | 25 ～ 40 | 20 ～ 50 | 16 ～ 40 | 20 ～ 32 | 20 ～ 25 | 16 ～ 32 | 32 ～ 40 | 32 ～ 40 |
| Shank width(mm) | 25 ～ 32 | 25 ～ 32 | 25 | 25 | 25 | 25 | 25 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 20 | - | 25 ～ 50 | 20 | 20 ～ 25 | 25 ～ 40 | 20 ～ 50 | 16 ～ 40 | 20 ～ 32 | 20 ～ 25 | 16 ～ 32 | 32 ～ 40 | 25 ～ 40 |
Loading...
Configure
Specification/Dimensions
-
Applicable Tip Shape
-
Applicable Chip Clearance Angle
-
Selfishly
-
Application
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Back Surface Clamp
- Other
-
Shank height(mm)
-
Shank width(mm)
Narrow search by specifying Manufacturer
-
- SANDVIK (193)
- SUMITOMO ELECTRIC HARDMETAL (106)
- KYOCERA (90)
- NGK SPARK PLUG (26)
- ISCAR (1)
CAD
-
- 2D
- 3D
Related Categories to Holding Tools for O.D. Tuning
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy