(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Threaded Inserts Dedicated Tools
These are dedicated tools for screw inserts.
There are dedicated tools for insertion, tang folding, and extraction respectively.
| Days to Ship |
|
|---|
-
Tool for Ensat, for Manual Processing, 610 Type
KKV
A manual work tool for inserts. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6
Standard Price: MYR 444.80- Days to Ship: 2 Day(s) or more -
MISUMI
Extraction tool for threaded inserts
- Volume Discount
Standard Price: MYR 123.57- Days to Ship: 2 Day(s) or more -
Self-Tapping Inserts - Hand Tools for Self-Tapping Inserts
MISUMI
Compatible threaded inserts are M3, 4, 5, 6, 8, 10 and 12.
- Volume Discount
Standard Price: MYR 410.15- Days to Ship: 1 Day(s) or more -
RECOIL
Includes an insertion tool with tap handle functionality. A magnet-type extraction tool has also been set together with this.
[Features]
· A male screw repair kit for individual recoils that is widely used throughout the world in repair associated with industrial machinery, automobiles, and motorcycles.
· The following parts are included in the red plastic box.
· Drill for bottom hole (M12-1 / 2 or less), recoil tap #2 (HSS), recoil (length 1.5D), insertion tool (M12-1 / 2 or less, and includes tap handle), extraction tool with magnet (M12-1 / 2 or less).
· The spark plug kit includes a pilot tap.
· The pilot tap does not use a drillStandard Price: MYR 312.11- Days to Ship: 9 Day(s) or more -
RECOIL
A male screw repair kit for individual recoils that is widely used throughout the world in repair and maintenance associated with industrial machinery, automobiles, and motorcycles.
Standard Price: MYR 426.43- Days to Ship: 4 Day(s) or more -
Trade Series Recoil Kit (Milli)
RECOIL
Includes an insertion tool with tap handle functionality. A magnet-type extraction tool has also been set together with this.
Standard Price: MYR 330.90- Days to Ship: 2 Day(s) or more -
Tool for Ensat, for Machine Processing, Extended Type, 621 Type
KKV
A tool for machine processing inserts. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6 size / internal screw d1 (mm) 2.5 3 3.5 4 5 6
Standard Price: MYR 2,129.27- Days to Ship: 9 Day(s) or more -
MISUMI
[Specification expansion] In response to many requests, a new standard product is now available! *For applicable products, please see the specification list or catalog PDF
- Volume Discount
Standard Price: MYR 102.97- Days to Ship: 2 Day(s) or more -
Thread Insert Installation Tool
MISUMI
[Specification expansion] In response to many requests, a new standard product has been released!
- Volume Discount
Standard Price: MYR 370.67- Days to Ship: 2 Day(s) or more -
IMAO CORPORATION
[Features]Mounting tool for KIC (Key Lock Insert). [Specifications]Material: SUJ2
Standard Price: MYR 105.07- Days to Ship: 5 Day(s) or more -
Thread Insert Tang Breaking Tool
MISUMI
Compatible threaded inserts range from M2 to M18.
- Volume Discount
Standard Price: MYR 97.29- Days to Ship: 2 Day(s) or more -
TSUGAMI
A steel tool used to break off the tongue from the notch after inserting the insert.
Standard Price: MYR 78.05- Days to Ship: 5 Day(s) or more -
Tool for Ensat, for Machine Processing, 620 Type
KKV
A tool for machine processing inserts. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6 size / internal screw d1 (mm) 2.5 3 3.5 4 5 6
Standard Price: MYR 1,115.43- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 105.19- Days to Ship: 9 Day(s) or more -
SUNCO
[Nominal M] 2, 2.5, 2.6, 5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 27, 30, 36
[Nominal W] #2-56, #4-40, #6-32, #8-32, #10-24, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1-8Standard Price: MYR 129.23- Days to Ship: 9 Day(s) or more -
TSUGAMI
A general insertion tool that even beginners can use to perform easy insertion. Available in sizes of M 2.5 mm or larger for both coarse and fine threads. Sizes under 8 mm are available for standard threaded inserts and locks.
Standard Price: MYR 269.09- Days to Ship: 5 Day(s) or more -
TSUGAMI
A tap that includes a spiral blade groove (approx. 35°) for efficiently performing tapping and creating blind holes.
Standard Price: MYR 113.39- Days to Ship: 5 Day(s) or more -
TSUGAMI
This is a tap that was especially designed for E-sert (helisert) bottom holes.
Standard Price: MYR 156.70- Days to Ship: 5 Day(s) or more -
TSUGAMI
Use when extracting the inserted threaded insert from the tapped hole. Applicable thread diameter: M6 to M22
Standard Price: MYR 139.85- Days to Ship: 5 Day(s) or more -
RECOIL
Includes an insertion tool with tap handle functionality. A magnet-type extraction tool has also been set together with this.
Standard Price: MYR 385.08- Days to Ship: 12 Day(s) or more -
RECOIL
[Features]
· Recoil taps differ from ordinary taps, designed for exclusive use with screw thread inserts (STI). They have a large diameter but the same pitch as a standard tap in order to accommodate the Recoil Inserts.
· Recoil Taps are manufactured to precise standards from High Speed steel (HSS or HSS-E) with ground threads and are available in Intermediate and Bottoming leads.
· In addition to hand taps, Spiral Point and Spiral Flute machine taps are also available for mass production purposes. In addition, for all spark plug applications pilot nose taps are available, which do not require a special recoil drill. The Recoil thread inserts when installed into a correctly tapped hole will provide the applicable internal thread tolerance for the installed bolt.
· Intermediate tap...The most commonly used tap, mainly used for through hole applications. 4 -thread lead.
· Bottoming tap...Used when tapping to the bottom of a blind hole. 2-Thread lead, and is normally used after a taper tap or intermediate tap.Standard Price: MYR 92.67- Days to Ship: 7 Day(s) or more -
RECOIL
[Features]
·A male screw repair kit for individual recoils that is widely used throughout the world in repair and maintenance associated with industrial machinery, automobiles, and motorcycles.
·The following parts are contained in a red plastic box.
·Pilot hole drill (M12-1/2 or less), Recoil tap #2 (HSS), Recoil (1.5D length), Insertion tool (M12-1/2 or less, with tap handle), Breaking tool with magnet (M12-1/2 or less).
·The spark plug kit contains a pilot tap.
·Pilot taps can be used to create oversize taps without using a drill, and since the original thread serves as a guide, angle errors do not occur.Standard Price: MYR 555.66- Days to Ship: 4 Day(s) or more -
RECOIL
The special insert removal tool makes it easy to remove inserts after insertion.
Standard Price: MYR 190.43- Days to Ship: 4 Day(s) or more -
Insertion Tool for Ensat and Gripp, for Manual Processing, 619 Type
KKV
A manual work tool for inserts. Size / internal screw d1 (mm) 14 18 size / internal screw d1 (mm) 14 18
Standard Price: MYR 1,324.68- Days to Ship: 9 Day(s) or more -
Insertion Tool for Ensat and Gripp, for Machine Processing, 629 Type
KKV
A tool for machine processing inserts. Size / internal screw d1 (mm) 14 18 size / internal screw d1 (mm) 14 18
Standard Price: MYR 4,082.62- Days to Ship: 18 Day(s) or more -
Sprue Insertion Tool INP M Thread
SUNCO
[Nominal M] 2.2, 2.5, 2.6, 3, 4, 5, 6, 8, 12, 14, 16, 18, 20, 22
Standard Price: MYR 449.45- Days to Ship: 5 Day(s) or more -
Sprue Insertion Tool INP Narrow Eye
SUNCO
[Outer Diameter - Pitch] M8-1.0, M10-1.25, M12-1.25, M14-1.5, M16-1.5, M18-1.5, M20-1.5
Standard Price: MYR 466.44- Days to Ship: 9 Day(s) or more -
Standard Price: MYR 578.92- Days to Ship: 9 Day(s) or more -
SUNCO
[Nominal M] 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 30, 36
[Nominal W] 1/4, 5/16, 3/8, 1/2, 9/16, 5/8, 3/4, 7/8, 1-8Standard Price: MYR 213.37- Days to Ship: 9 Day(s) or more -
SUNCO
This is a dedicated driver used when extracting the Insert series that has been inserted from the workpiece. Only Insert can be extracted without damaging the workpiece.
Standard Price: MYR 339.47 Days to Ship: 9 Day(s) or more -
E-Sert Bending and Extracting Tool for M Threads
SUNCO
[Nominal M] 2.5, 2.6, 3, 3.5, 4, 5, 6, 7, 8, 10, 14, 16, 18, 22, 24, 27, 30, 33, 36, 39, 42, 52
[Nominal W] #2-56, #4-40, #6-32, #8-32, #10-24, 1/4, 5/16, 3/8, 7/16, 1/2, 6/16, 5/8, 3/4, 1-8Standard Price: MYR 89.90- Days to Ship: 5 Day(s) or more -
SUNCO
Dedicated tool for steel threaded inserts.
[Features]
·Used when extracting an inserted E-sert (former heli-sert) from a tapped hole.
[Applications]
・ Dedicated tool for threaded inserts.Standard Price: MYR 112.38- Days to Ship: 9 Day(s) or more -
Sprue 2 pcs. Set Tap for M Thread
SUNCO
[Nominal M] 2, 2.2, 2.5, 2.6, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 30, 36
Standard Price: MYR 167.22- Days to Ship: 9 Day(s) or more -
SUNCO
[Outer Diameter - Pitch] M8-1.0, M10-1.25, M12-1.25, M14-1.5, M16-1.5, M18-1.5, M20-1.5
Standard Price: MYR 241.33- Days to Ship: 9 Day(s) or more -
Standard Price: MYR 105.19- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 98.55- Days to Ship: 9 Day(s) or more -
Standard Price: MYR 198.12- Days to Ship: 9 Day(s) or more -
SUNCO
[Nominal M] 2, 2.2, 2.5, 2.6, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 42
Standard Price: MYR 111.64- Days to Ship: 9 Day(s) or more -
SUNCO
[Outer Diameter - Pitch] M6-0.75, M8-1.0, M10-1.25, M12-1.25, M14-1.5, M16-1.5, M18-1.5, M201.5, M221.5, M24-2.0, M27-2.0, M30-2.0, M33-2.0, M36-3.0, M39-3.0
Standard Price: MYR 134.97- Days to Ship: 9 Day(s) or more -
SUNCO
[Outer Diameter - Pitch] M6-0.75, M8-1.0, M10-1.25, M12-1.25, M14-1.5, M16-1.5, M18-1.5, M20-1.5, M22-1.5, M24-2.0, M27-2.0, M30-2.0, M33-2.0, M36-3.0, M39-3.0
Standard Price: MYR 134.97- Days to Ship: 9 Day(s) or more -
SUNCO
It is used to extract the sprue from the base material female thread of the tap slot.
Standard Price: MYR 155.48- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 398.84- Days to Ship: 9 Day(s) or more -
SUNCO
[Nominal W] #6-40, #8-36, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8
Standard Price: MYR 398.84- Days to Ship: 9 Day(s) or more -
Insert Nut Threaded Type Insert Jig Slotted Dedicated / IR-00S IR-00R
HIROSUGI-KEIKI
* Only products with slits can be used.
Applicable Product Numbers: IRB-SW, IRB-SCW, IRU-SW, IRB-S, IRB-SC, IRU-SStandard Price: MYR 87.21- Days to Ship: 10 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Screw Dia. M (after insertion)(mm) |
| Type |
| Material |
| Screw Type |
| Notch |
| Thread Dia. (After inserted), Unified(inch) |
| Sales Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KKV | MISUMI | MISUMI | RECOIL | RECOIL | RECOIL | KKV | MISUMI | MISUMI | IMAO CORPORATION | MISUMI | TSUGAMI | KKV | SUNCO | SUNCO | TSUGAMI | TSUGAMI | TSUGAMI | TSUGAMI | RECOIL | RECOIL | RECOIL | RECOIL | KKV | KKV | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | HIROSUGI-KEIKI |
| Product Series | Tool for Ensat, for Machine Processing, Extended Type, 621 Type | Insertion Tool for Ensat and Gripp, for Manual Processing, 619 Type | Insertion Tool for Ensat and Gripp, for Machine Processing, 629 Type | Insert Nut Threaded Type Insert Jig Slotted Dedicated / IR-00S IR-00R | ||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
| Days to Ship | 2 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 9 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 12 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 18 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 10 Day(s) or more |
| Screw Dia. M (after insertion)(mm) | 2.5 ～ 16 | - | - | - | 6 ～ 14 | 2 ～ 20 | 2.5 ～ 30 | - | - | - | - | 3 ～ 20 | 2.5 ～ 30 | 2 ～ 8 | 2 ～ 24 | 3 ～ 10 | 3 ～ 8 | 3 ～ 12 | - | - | 2 ～ 16 | 10 ～ 18 | - | 14 ～ 18 | 14 ～ 18 | 2.2 ～ 20 | 8 ～ 20 | 10 ～ 12 | 6 ～ 30 | - | 2.5 ～ 24 | 1 ～ 4 | 2 ～ 36 | 8 ～ 16 | 2 ～ 16 | 4 ～ 16 | - | 2 ～ 20 | 6 ～ 36 | 6 ～ 16 | 2 ～ 5 | - | - | - |
| Type | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool |
| Material | Steel | - | - | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | - | - | - | - | - | Steel | - | - | - | Steel | Steel | Steel | Steel | Stainless Steel (SUS303/304) | - | Stainless Steel (SUS303/304) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Type | Metric (Coarse) Thread | - | - | - | - | - | - | - | - | - | - | - | - | Metric (Coarse) Thread | Metric (Coarse) Thread / Metric (Fine) Thread / Unified (Coarse) Thread / Unified (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | - | - | - | - | - | - | Metric (Coarse) Thread | Metric (Fine) Thread | Metric (Fine) Thread | Metric (Coarse) Thread / Unified (Coarse) Thread | - | Metric (Coarse) Thread / BSW (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Metric (Fine) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread | Unified (Fine) Thread | - |
| Notch | Not Provided | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2 ～ #10-24 | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/4 ～ 5/8 | - | #4-40 ～ #10-24 | - | - | - | - | - | 1/4 ～ #10-24 | - | - | - | - | 1/2 ～ #10-24 | 1/2 ～ #8-36 | - |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | - | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | - | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | - | - | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. |
Loading...
Configure
Specification/Dimensions
-
Screw Dia. M (after insertion)(mm)
-
Type
-
Material
-
Screw Type
-
Notch
-
Thread Dia. (After inserted), Unified(inch)
-
Sales Unit
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Threaded Inserts Dedicated Tools
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy